Specifications 2 gauge approximately 87" long Black PVC covering soldered and heat sealed on the ends NOTE: Negative battery post to starter switch. Cub up to SN: 224400 Farmall Cub Loboy

Cleans corrosion and other contaminates from your battery terminals. Has a acid indicator in it. Turns pink when it comes in contact with acid.

Complete Wire Harness for International 300 & 350 Gas Utility Tractors Modified for a 1-Wire Alternator Made to Look Exactly Like the Original with Our Premium Cotton Braid Over PVC Wire Has the Correct Gauge, Color, Wire,

Complete Wiring Harness for Farmall Super A Up to SN#: 345198

International Super A, Super AV, Super A-1 with coil ignition Includes; main harness with headlight, light switch to rear light, switch to starter, fuse holder & fuse housing to light switch, lead to generator terminal, lead to regulator, primary to coil, wiring diagram Like original, cloth sewn with color tracers Serial number 345198 and below does not include a fuse holder since it's in the headlight switch.

This is a complete wiring harness. We need to know your serial number to complete your order.

Complete Farmall 350 Row Crop Gas Wiring harness, modified for a 1 wire alternator. Made to look just like the original with cotton braid cloth with correct gauge, color and connectors. Does NOT include battery cables or spark plug wire set; available separately

Complete Wire Harness for Farmall 460 & 560 Gas Row Crop Tractors Modified for use with a Delco 10SI (3-Wire) Alternator Made to Look Exactly Like the Original with Our Premium Cotton Braid Over PVC Wire Has the Correct Gauge, Color, Wire,

***harness made to order, lead time involved*** Farmall 856 Deluxe Fender Wiring Harness

Original Design with 10DN Alternator Made to Look Exactly Like the Original with Our Premium PVC Wire. Has the Correct Gauge, Color, Wire, & Fuse Holders (If Needed). All Terminals are Soldered

Original type harness using similar connectors and cloth covered wire. Ready to plug in, these are made in the USA.

WIRING HARNESS --- CLOTH COVERED LIKE ORIGINAL --- INCLUDES WIRING INSTRUCTIONS & LIGHT WIRES -- USA MADE --- Farmall C WITH CUTOUT. This for serial number 47125 and below.

***LEAD TIME INVOLVED ON NEW HARNESS ORDERS*** WIRING HARNESS KIT - COMPLETE WITH INSTRUCTIONS AND LIGHT WIRES - Only includes wiring harness not voltage regulators. The description is for you to figure out which harness you need for your tractor.

WIRING HARNESS KIT --- CLOTH COVERED LIKE ORIGINAL, INCLUDES WIRING INSTRUCTIONS AND LIGHT WIRES. -- USA MADE --- International Applications: H, HV (ALL SN 340954 & UP WITH REGULATOR UNDER FUEL TANK)

WIRING HARNESS --- CLOTH COVERED LIKE ORIGINAL INCLUDES WIRING INSTRUCTIONS & LIGHT WIRES -- USA MADE --- International Applications: H IF CONVERTED TO REGULATOR ON GENERATOR

WIRING HARNESS --- CLOTH COVERED LIKE ORIGINAL INCLUDES WIRING INSTRUCTIONS & LIGHT WIRES --- USA MADE --- International Applications: M W/ REGULATOR ON STEERING POST (UNDER FUEL TANK) (SN FBK 229911 & UP), EARLY SUPER M (SN F501 - F28174 AND SN L500001 - L504801 GAS) WITH BATTERY BOX UNDER FUEL TANK

This kit comes complete with horn, horn button, relay wire loom. Make two connections to your battery and you are making music. Made in the USA

If you like driving your tractor and some times need to get peoples attention - YOU NEED A HORN. This is a complete horn kit. Kit includes: horn, wire, relay, button. A universal kit made to fit many tractors. Made in the USA

Fits Models: 235 245 255 1120 1130 1140

I4 used as a light wire, hour meter wire, or safety switch wire junction block I4 used as a light wire, hour meter wire, or safety switch wire junction block; SN: 36786 & up Super A used as a light wire, hour meter wire, or safety switch wire junction block; with voltage regulator

Black Primary Wire Harness, used to wire kill switch to magneto on Cub/A/B/C/Super A Farmall tractors.

Specifications Does not include lights, PTO or rear harness. Use with 6 or 8 socket plug. 154 185

Prevents battery corrosion. If you are a tractor collector and have many tractors with batteries, this spray is a must to keep your batteries in good shape. Seals and protects. Works great on 6 and 12 volt. Can be used on all connectors.

Specifications For tractors with 1 wire alternator. Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Super M Gas / LP late, SN: F28175 and up & L504802 and up MTA Gas / LP Super MTA

Specifications Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Hydro 100 all models with original 10SI alternator and flat top fenders 766 diesel all models with original 10SI alternator and flat top fenders 966 SN: 11684 and up all models with original 10SI alternator and flat top fenders 1066 SN: 12510 and up all models with original 10SI alternator and flat top fenders 1466 SN: 10325 and up all models with original 10SI alternator and flat top fenders 1468 all models with original 10SI alternator and flat top fenders 1566 all models with original 10SI alternator and flat top fenders 1568

Specifications Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. 1206

Specifications For 12 volt generator systems only. Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. 140

For 1 wire alternator Fast hitch harness is available by special order. Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Restoration quality Original style braiding All terminals are silver soldered and sealed 200 230

Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Restoration quality Original style braiding All terminals are silver soldered and sealed 300

For 1 wire alternator 7 wire main harness and push button start Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Restoration quality Original style braiding All terminals are silver soldered and sealed 300 350

This is for the Farmall 400 and 450 with 3 position key switch, it is NOT for push button start. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Restoration quality Original style braiding All terminals are silver soldered and sealed

For 1 wire alternator Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Restoration quality Original style braiding All terminals are silver soldered and sealed 460 560

Specifications For 12 volt original alternator systems only. Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Other Application Info This wire harness fits gas models with original 12 volt 10DN alternator system only. The 10DN alternator was introduced in 1966 and is characterized by the external voltage regulator. Newer alternators utilize an internal voltage regulator. Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. 706 806

Specifications For 6 volt generator systems only. Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. W6

Specifications For 12 volt generator systems only. Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. 706 Farmall, gas models with generator and fender mounted lights 806

Specifications For 6 volt generator systems only. Other wiring harness sets available. Call for quotes. Super W6 gas, up to SN: 9999 with 4 terminal regulator on generator W6

Other wiring harness sets available. Call for quotes. Note: Complete with instructions and light wires. Each wire is labeled for easy installation. Restoration quality Original style braiding All terminals are silver soldered and sealed 100 130

This is great stuff. Protect your wiring. It fuses permanently upon contact with itself.

Is the module down in your IH 88 series tractor? Plug in this Sentry Test Tool in place of the original module to get your tractor to the shop for repairs. w/ Functioning Tellite. Includes: (1) Relay 5088 5288 5488

Three gauge kit for Farmall tractors H, M, W, SH, SMD, SMTA, SW series.