This seal is on the shaft that runs across the front of the engine and connects with a rod that goes to the carburetor.

This goes on the speed lever shaft.

IGNITION TUNE UP KIT WILL FIT THE IHC H4 MAGNETO NOTE: INCLUDES ROTOR, POINTS, CONDENSOR & GAP GAUGE International Applications: A, AV, AI, SUPER A, B, BN, C, SUPER C, H, SUPER H, HV, M, MV, SUPER M, 100, 130, 200, 230, 300, 350, 400, 450, MTA, MTAV, W6TA, W4, I4, I9, O4, W6, T6, T9, O6, I6, OS6, 600, 650, POWER UNITS: IU4, IU6, U2, I2A, U164, U6

IGNITION TUNE UP KIT WITHOUT ROTOR --- FITS: DELCO DISTRIBUTORS WITH CLIP HELD CAP THRU 1963 --- INCLUDES: POINTS, CONDENSER, GAP GAUGE --- International Applications: A, SUPER A, AV, SUPER AV, B, BN, C, SUPER C, H, HV, SUPER HV, M, MV, SUPER MV, MTA SERIES WITH DELCO VERTICAL CONVERSIN DISTRIBUTOR #1111411 --- Replacement Part #: 1944374 (POINT SET), 1869704 (CONDENSER)

IGNITION TUNE UP KIT, 4 CYL --- IH MODELS LISTED WITH IH DISTRIBUTOR. 4 CYL MODELS. WILL NOT FIT DELCO OR PRESTOLITE DISTRIBUTORS. CONTAINS ROTOR, POINT SET & CONDENSOR W/FEELER GAUGE. Fits A, SUPER A, B, BN, C, SUPER C, CUB, CUB LO-BOY, H, SUPER H, M, MV, MD, SUPER M, SUPER MD, O4, OS4, O6, OS6, ODS6, W4, W6, WD6, SUPER W6, SUPER W6TA, SUPER WD6, SUPER WD6TA, W9, WD9, WR9,

Made with Zinc Like the Original!

LIGHTING SWITCH DIMMER RESISTOR --- MADE IN USA --- FITS SWIITCHES FOR BOTH CUTOUTS AND GENERATORS --- Fits; FARMALL H, SUPER H, W-4, SUPER W-4, O-4, OS-4, M, SUPER M, W-6, SUPER W-6, W-6, OS-6, O-6, WD-6 WITH LIGHTING ONLY, W-9, WR-9, WR-9S, W-400 GAS, W-450 GAS, CUB, A, SUPER A, B, BN, C, SUPER C, 100, 130, 200, 230, 400 GAS, 450 GAS, 300 GAS ---

LIGHTING SWITCH GENERATOR FIELD RESISTOR --- MADE IN USA --- Fits Cub, A, B, C, H, M, SUPER A, with cut-out and 4 position light switch.

1.923" tall 0.315" wide 0.550" long 2 used per engine; sold individually

MAGNETO COIL WILL FIT IHC F4 & F6 MAGNETO International Applications: A, AV, AI, SUPER A, B, BN, C, SUPER C, H, SUPER H, HV, M, MV, SUPER M, 100, 130, 200, 230, 300, 350, 400, 450, MTA, MTAV, W6TA, W4, I4, I9, O4, W6, T6, T9, O6, I6, OS6, 600, 650, POWER UNITS: IU4, IU6, U2, I2A, U164, U6

This cable is an exact copy of the original. Made in the USA

New starter rod for your Farmall cub Tractor. Connects to your starter switch lever, with pull on opposite end.

OIL GAUGE, black face International Harvester Corporation & with white letters. H, HV, I4, I6, I9, M, MD, MDV, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S; Replaces: 41934D, 41934DB

Mechanical Oil pressure gauge, has a built in 6 or 12 volt light. Fits; Farmall H, Super H, M, Super M, W, Super W(1947-1954).

Specifications 3.256" outside diameter (OD) 2.063" inside diameter (ID) 0.500" wide Fits as a magneto or distributor drive seal Cub Cub Loboy 154 184 185

Thsi fits 560 and others with distributor 367839R92.

Kit works together with your Prestolite distributor to increase fuel economy, horsepower, and plug life. Easy to install kit has no moving parts to wear out, and replaces pitted and corroded point sets. Kit does not include distributor. Buy this for: Combine (Wisconsin VRDD engine) (Autolite Distributor IAD-6004-2F), 4 Cyl. Baler (Wisconsin VG4D, VH4D engine), 4Cyl. 37T, 4Cyl. 4Cyl. 37W, 4Cyl. 47T, 4Cyl. 47W (Autolite Distributor IAD-6004-2N), 4Cyl. 57T, 4Cyl. 57W, 71W (Autolite Distributor IAD-6004-2F), 4Cyl. 45, 46 (Wisconsin VF4), 4Cyl. 47 Twine, 47 Wire (Wisconsin VH4D, VH4), 4Cyl. 56, 4Cyl. 57 Twine; 4Cyl. 56, 4Cyl. 57 Wire (Wisconsin engine.), 4Cyl. Wisconsin VF4D engine.

Pertronix Ignitor kit for Autolite 6 cylinder; increase fuel economy, horsepower, and plug life. Easy to install kit has no moving parts to wear out, and replaces pitted and corroded point sets. Kit does not include distributor. This items works for all years of the 6Cyl. 80 Wisconsin VH4 engine and uses the Autolite distributor.

This a custom fit kit, no cutting or crimping, you just install.

This is an exact copy of the original. Made in the USA

ROTOR BUTTON --- WILL NOT FIT DELCO & PRESTOLITE DISTRIBUTORS --- International Applications: A, AV, AV1, SUPER A, SUPER AV1, B, BN, C, SUPER C, CUB, CUB LOBOY, H, HV, SUPER H, SUPER HV, M, MV, MD, MDV, SUPER M, SUPER MD, MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230 --- Replacement Part #: 353896R91

SPARK PLUG --- 18 MM THREAD DIAMETER --- 1/2" REACH --- 7/8" HEX --- MEDIUM HOT --- STD. TIP/RESISTOR --- PLUG GAP .025 --- International Applications: 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 3616, HYDRO 70, HYDRO 86, T4, T5, T340;

Specifications Priced & Sold individually M14-1.25mm thread 1/2" Thread reach 13/16" Hex Preset Gap 0.030" B-250 w/ BC144 British built engine. B-275 w/ BC144 British built engine. B-276 w/ BC144 British built engine. B-414 w/ BC144 British built engine. 354 w/ BC144 British built engine. 444 w/ BC144 British built engine. 2444

SPARK PLUG WIRING SET, 4 CYL --- HAS STRAIGHT BOOTS --- COPPER WIRES, WATERPROOF NEOPRENE --- International Applications: 404, 504, 3514 & OTHER MODELS USING STRAIGHT BOOTS

STARTER HAND CRANK W/ PIN --- WITH SPINNER --- 13-1/2" TO FIRST BEND 3/4" DIAMETER --- USA MADE --- International Applications: A, SUPER A W/ 113 ENGINE, B; (C, 200, 230, 330, 340, 404, 2404, 504 W/ TRICYCLE FRONTS ONLY) --- Replacement Part #: IH: 53385DBX, 15204D (PIN)

Specifications 0.310" O.D. 5.105" overall length Uses 3/32" x 5/8" Cotter Pin (Not Included)

Steel braided battery ground strap - 9" long. For Farmall Cub and other tractors.

UNIVERSAL 12 VOLT RESISTOR --- 2 TERMINAL STYLE --- REDUCE VOLTAGE --- 1.125 TO 1.375 OHMS OF RESISTANCE. --- International Applications: IH / FARMALL MODELS

Universal 4 wire starter ignition switch. Keep your tractor safe from theft and keep the kids in your neighbor hood safe as well. fits in a .75" hole.

UNIVERSAL ALTERNATOR MOUNTING KIT --- NOTE: DOES NOT INCLUDE THE TOP ADJUSTING BRACKET --- THIS ALTERNATOR MOUNTING KIT USED WHEN SWITCHING FROM A GENERATOR TO AN ALTERNATOR --- International Applications: IH MODELS

UNIVERSAL TOP ADJUSTING BRACKET FOR ALTERNATOR OR GENERATOR --- 7/8" WIDE, FARTHEST END OF SLOT TO CENTER OF MOUNTING HOLE IS 8 1/4", 3/8" MOUNT HOLE, 3 3/4" SLOT LENGTH --- International Applications: INTERNATIONAL MODELS

12 Volt Voltage Regulator for Cub. This is a saddle mount voltage regulator.

This switch is momentary on, normally off. 12 volt, 60 amp. offen used for horns and starting.

WIRING HARNESS GROMMET --- MOUNTS IN AMP BOX --- International Applications: A, AV, B, BN, C, H, HV, M, MV, MD, MDV, SUPER M, SUPER MD, SUPER MTA, I4, I6, ID6, I9, ID9, W4, W6, W9, WR9, WD9, WDR9, O4, O6, OS6, ODS6, SW4, SW6, SW9, SWDR9 --- Replacement Part #: 52062D