***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Aerosol cans. This color is perfect for doing your wheel rims on any of the Farmalls that had silver colored rims. Aerosols can only be shipped by case, so quantity 1 = 6 aerosol cans. (photo and acutal product label may be different as they get updated)

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** For years of protection against Oxidation, Weathering, Stains, UV Rays, Corrosion, Salt Spray and Electrolysis. Makes re-cleaning a snap. Will work on most metal surfaces. Rejuvenates and restores faded or oxidized surfaces to "like new" condition. Clear-Coat is easily applied using a cotton cloth or brush. Clear-Coat will not CHIP, CRACK OR PEEL. The surface must be clean and dry. *Aerosols must be sold in cases of 6 cans. Quantity 1 = case of 6 cans.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** no returns Aerosols can only be ordered by case. Quantity 1 = 6 aerosol cans. Gloss Use this FEDERAL/International YELLOW for: Cub Cadet Yellow paint. Yellow Farmall paint Yellow Farmall Cub Lo-Boy paint This is the correct tint heavy duty industrial enamel for the above listed tractors. Our fade resistant, rust resistant paint is high gloss and ideally suited for working tractors and show tractors alike. We recommend a clear coat or hardener with a 24 hour dry time between paint and clear coat application for best results. Reducer is not recommended. This paint does not require reducer, If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not needed but it is an option.

When installing vinyl decals on vehicles, these 2 products are indispensable. The "ActionTac" solution will allow you to adhere the vinyl without the sticky really grabbing hold. It buys you a few minutes to pull the decal off, and realign it making sure the placement is correct. The plastic burnisher has a soft felt side, and a hard plastic side to push all the bubbles out and make sure the vinyl has a strong adhesion.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Increases gloss and hardness and speeds up dry time. Use one pint hardener per gallon of restoration paint. Our paints and hardeners are designed for restoring classic tractors and implements to display condition. Colors are formulated to match manufacturers' colors of original equipment. Slight variations may be experienced due to weathering of the original coating or occasional changes in manufacturers' standards. Reducer is not recommended. This paint does not require reducer. If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not required but it is an option.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Label may be updated and different from photo. No Returns on paint Use this IH RED for: Cans of aerosol paint are sold only by the case. Quantity 1 = a case of 6 aerosol cans. 1936 to 1985 Farmall and International badged tractors. This is the correct tint heavy duty industrial enamel IH red paint for letter series Farmall. Our fade resistant, rust resistant paint is high gloss and ideally suited for working tractors and show tractors alike. We recommend clear coat or hardener with a 24 hour dry time between paint and clear coat application for best results. Recommended hardner ratio is 1/2pt to 1 gallon, but no more than 1 pt per gallon. Reducer is not recommended. This paint does not require reducer. If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not required but it is an option. Because the paint is classified as ORM-D, the shipping charges are higher because it has to ship via UPS Ground.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Aerosols can only be ordered by case. Quantity 1 = 6 aerosol cans. Use this IH OFF-WHITE for: Cub Cadet White paint. White Farmall paint White Farmall Cub Lo-Boy paint This is the correct tint heavy duty industrial enamel for the above listed tractors. Our fade resistant, rust resistant paint is high gloss and ideally suited for working tractors and show tractors alike. We recommend clear coat or hardener with a 24 hour dry time between paint and clear coat application for best results. Reducer is not recommended. This paint does not require reducer. If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not required but it is an option.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Gray Primer for all Farmall tractors. quantity 1 = case of 6

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Use this black paint for wheel weights and accessory weights on your Farmall tractor. Some of the weights were painted black from the factory, and this heavy duty industrial enamel is appropriate for restoration or touch up painting. High quality gloss black paint for any application! Keep rust and water away! CASE QUANTITY ONLY (6)

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** This is high heat aluminum-colored paint for muffler/exhaust pipe applications. aerosol only shipped in Qty of 6 (label may be updated from photo)

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Use this IH BLUE for: Farmall Cub, A and Super A implements. IH Farmall implements This is the correct tint heavy duty industrial enamel IH Blue paint for Farmall Implements. Our fade resistant, rust resistant paint is high gloss and ideally suited for working tractors and show tractors alike. We recommend clear coat or hardener with a 24 hour dry time between paint and clear coat application for best results. Reducer is not recommended. This paint does not require reducer. If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not required but it is an option. Aerosols must be ordered by case quantity. Quantity 1 = 6 aerosol cans.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** This kit includes a gallon of red primer which will coat one Farmall tractor, a gallon of IH Red paint (does 3 coats on a Farmall Cub), a half pint of hardener to mix with the IH Red for that rock solid finish, and 6 cans of IH Red aerosol to touch up any auxillary items. Your tractor will be protected from rust if painted with our restoration quality industrial enamel. Reducer is not recommended. This paint does not require reducer. If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not required but it is an option.

Heavy Duty Industrial Paint Formulated to Provide: Outstanding Durability Rust Protection High Hiding Excellent Fade Resistance Great for Many Different Products Like: Farm Equipment Machinery Industrial Applications

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD**** As a promotion in the first half of 1950, Farmall Dealer demo model tractors were painted white. If you have one of these rare tractors, this is the correct color of white paint for restoration or touch-up. We have seen these tractors pop up at tractor shows and they really catch the eye. It is not a bright white or a cream white, it is a particular off-white which looks really nice. This same color was also used on the deluxe version of the International Scout - the "Doll Up" Scout, and was used on some 1950's vintage International balers. This is the white used for the demonstrator tractors from 1950. Aerosol cans can only be sold in case quantity, so choosing quantity 1 = 6 aerosol cans.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Custom made Farmall F Series grey paint Reducer is not recommended. This paint does not require reducer. If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not required but it is an option. Aerosol cans can only be shipped in cases of 6. Quantity 1 =

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** Increases gloss and hardness and speeds up dry time. Use one pint hardener per gallon of restoration paint. Our paints and hardeners are designed for restoring classic tractors and implements to display condition. Colors are formulated to match manufacturers' colors of original equipment. Slight variations may be experienced due to weathering of the original coating or occasional changes in manufacturers' standards. Reducer is not recommended. This paint does not require reducer. If you feel you want a reducer, the manufacturer recommends pure naptha. Hardener is not required but it is an option.

Chemically binds & converts rust into a protedtive black coating that is ready for paint.

Chemically converts rust into a protective black polymeric coating that is ready for paint. We have tested this product and it works great! One bottle is enough to cover the sheet metal on a Farmall A.

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD*** We paint battery boxes, and other normal temperature parts with this paint and it looks great. *Must be ordered in case quantity. Ordering 1 = 6 aerosol cans.