Reman 6-1/2" Pressure Plate For Farmall Cub & Cub Lo-Boy (NOT for 154, 184

10" Reman Clutch Pressure Plate For Farmall: H, HV, W4. 6 Spring. Replaces IH PN# 52900d.

10" Reman Clutch Kit For Farmall: H, HV, W4 Contains Pressure Plate, 10in Disc, Throw Out Bearing, and Pilot Bearing.

Specifications 11" Plate O.D. 1.580" Center Hole I.D. Includes: 3048532R1 Release lever plate 705530R1 Release lever plate retainer springs (4) 3048534R1 Cover 3048531R1 anti-rattle springs (4) 700915R1 Struts (4) 700910R1 Thrust springs (12) 705536R1 Release levers (4) 3069200R91 Release lever pins (4) 3048535R1 Pressure plate

11" Reman Clutch Kit For Farmall: M, MD, MDV, MV, O-6, W6, WD6. Clutch kit includes 11" pressure plate, clutch disk, throwout bearing, and pilot bushing.

Specifications Teeth: 18 & 35 H

Specifications Teeth: 20 & 34 M MD MDV MV

Specifications Teeth: 20 & 30 Super M Super W6

Bearing Deep Groove, Brg 6213

Specifications 1.850" O.D. 0.983" I.D. 0.473" Width Cub as a front upper transmission main shaft bearing Cub Loboy as a front upper transmission main shaft bearing 154 as a front upper transmission main shaft bearing 184 as a front upper transmission main shaft bearing 185

Belt Pulley Drive Shaft Oil Seal For Farmall Cub. Replaces Ih#351276r91

Specifications 4-piece kit with O-rings and oil seal for bull pinion shaft Complete kit for 1 side of tractor Includes: 530806R91 oil seal 530789R1 inner piston O-ring 530807R1 outer piston O-ring 70923596 brake piston housing O-ring Hydro 100 21456 706 756 766 806 826 856 966 1026 1066 1206 1256 1456 1466 1468

Specifications This brake lock assist attachment bolts to the rear (closest side to driver) of the hydraulic reservoir. Instructions and complete hardware are included. Super M SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MD SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MDV SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MDV-TA MTA Super MTA Super MTA diesel Super MV SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MVTA

Specifications This brake lock assist attachment bolts to the lower dash panel. Instructions and complete hardware are included. 400 Farmall 450

I4 C Super C H HV Super H Super HV M MD Super M Super MD Super MDV MDV Super MDV-TA MTA Super MTA Super MTA diesel MV Super MV Super MVTA Super W4 W4 Super W6 Super W6TA W6 Super WD6 WD6 200 230 300 Farmall 350 Farmall 400 Farmall W400 Wheatland 450 British 450 Farmall W450 Wheatland 460 Farmall 560 660

BRAKE PEDAL RETURN SPRING, CLUTCH PEDAL RETURN SPRING --- ALL W/ BAND BRAKES --- USA MADE --- OVERALL LENGTH = 8-1/8" --- International Applications: BRAKE PEDAL RETURN SPRING FOR: H, HV, M, MV, MD, MDV, FITS AS A CLUTCH PEDAL RETURN SPRING FOR INTERNATIONAL 544, 2544 ---

Fits Models: Model Note Equipment Information M MD MDV MV O6 ODS6 OS6 W6 WD6

Specifications 5-1/16" inside diameter 5-17/32" outside diameter 15/64" wide 2 required per tractor Sold Individually H SN: 5986 & up Super H 300 Farmall (Row-Crop) and International (Utility) 330 340 Farmall (Row-Crop) and International (Utility) 350 Farmall (Row-Crop) and International (Utility) 460 Farmall (Row-Crop) and International (Utility) 504 Farmall (Row-Crop) and International (Utility) 544 International (Utility) only 606

Model Note Equipment Information M up to SN: 294225 with band brakes MD up to SN: SN: 285504 with brake bands Super M Super MD Super MDV MDV up to SN: SN: 285504 with band brakes Super MDV-TA MTA Super MTA MV up to SN: 294225 with band brakes Super MVTA Super W6 W6TA Super WD6 400 W400 450 W450 560 660

Specifications 2.313" inside diameter 3.505" outside diameter 0.313" width 2 used per tractor; sold individually I4 used as a bull pinion shaft bushing retainer oil seal H up to SN: 391357 used as a bull pinion shaft bushing retainer oil seal HV up to SN: 391357 used as a bull pinion shaft bushing retainer oil seal O4 used as a bull pinion shaft bushing retainer oil seal OS4 used as a bull pinion shaft bushing retainer oil seal W4

Specifications 2.125" I.D. 3.355" O.D. 0.438" width C

Specifications 4.475" inside diameter 0.210" thick Fits Models: Model Note Equipment Information M SN: 294226 and up with disc brakes MD SN: 28505 and up with disc brakes Super M Super MD Super MDV MDV SN: 28505 and up with disc brakes Super MDV-TA MTA Super MTA MV SN: 294226 and up with disc brakes Super MVTA Super W6 W6TA Super WD6 400 W400 450 W450 560

Bull Pinion Shaft Snap Ring For Farmall H. IH PN#:358059r1

Specifications The dimensions of this tool are: 0.787" pilot O.D. 9-3/8" overall length (small spline) 1-1/8" spline O.D. with 10 splines (large spline) 1-11/16" spline O.D. with 16 spline. 300 330 340 350 460 504 544 606 656 664 666 686

Specifications 6 spline 1.250" spline O.D. 0.865" pilot O.D. 5.875" overall length A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C 100 130 140 200 230 240 404

Specifications The dimensions of this tool are: 10 spline 1-1/4" spline O.D. 0.970" O.D. pilot 5-1/2" overall length. I4 H HV Super H Super HV O4 W4

Specifications Spline diameter: 1-1/2"; 10 splines; 10-3/4" long; 0.965" pilot O.D M MD Super M Super MD Super MDV MDV MV Super MV O6 ODS6 OS6 T20 Super W6 both up to SN: 9084 Super WD6 both up to SN: 9084 F20 Regular

Clutch Alignment Tool For Farmall: B275, B276, B414, 354, 364, 384, 424, 434, 444, 2300A, 2300, 2424, 2444, 3414, 3444. Pilot Dimensions .787", 1st Spline= 1-1/8" 10 Spline, 2nd Spline= 1-3/4" 10 Spline.

New 8" Woven Clutch Disc 13/16" 12 Spline Hub For IH 254 Tractors. Replaces PN#: 1273253C1, 1346877C1, 19631112000, H1273253, MA-19631112000

NOS (new old stock) clutch driven disc for a Farmall Regular.

NOS(new old stock) clutch driving stud for use on a Farmall Regular. It is 1"x4-19/32".

NOS(new old stock) clutch driving stud nut on a Farmall Regular.

Specifications Includes: Clutch Joint Bolt Lock washer Nut 7/16"-20 UNF thread 2-3/32" Overall length Model Note Equipment Information H Farmall HV Farmall Super H Farmall Super HV Farmall O4 Farmall OS4 Farmall Super W4 Farmall W4 Farmall F12 F14 F20 Regular

Specifications Includes: Clutch Joint Bolt Lock washer Nut 7/16"-20unf thread 2-3/16" Overall length M MD Super M Super MD Super MTA O6 ODS6 OS6 W6

Includes new pressure plate, new woven clutch disc and throw-out bearing Pilot bearing not included Dimensions: 10-1/2" outside diameter 1.125" clutch disc spline inside diameter 10 spline clutch disc 1.687" pressure plate spline inside diameter 16 pressure plate splines 300 330 340 350 460 504 544 606

Specifications Kit includes: new pressure plate new woven clutch disc throw-out bearing pilot bearing alignment tool 10" O.D. 1-1/4" spline I.D. 10 splines I4 H up to SN: 391357 HV up to SN: 391357 W4

This an 11' clutch kit and includes pilot bearing, throw out bearing, disc and pressure plate.

CLUTCH KIT (ROCKFORD CLUTCH) KIT INCLUDES: 1 NEW CLUTCH DISC 1 NEW PRESSURE PLATE 1 NEW THROWOUT BEARING 1 CLUTCH PILOT BUSHING 6-1/2", 10 SPLINE, 15/16" HUB, WOVEN DISC International Applications: CUB, CUB LOBOY (NOT 154 & 184) Replacement Part #: 351773R91(CLUTCH DISC), 351760R91 (PRESSURED PLATE), 350921R11 (PRESSURE PLATE), 251266R1 (PILOT BEARING)

This 7 piece kit includes (1) Clutch Disc - 404640R93 (1) Pressure Plate - 404639R94 (1) Flywheel Plate - 531708R11 (1) Throw-out Bearing w/ carrier- 404671R1 (1) Bushing - 404666R1 (2) Brake Pucks - 404642R1