Specifications Verify block casting number (Above oil filter canister) before ordering. Fits block casting #'s 354898R1, 354898R2, 356318R2, 356318R3, 364111R2, 366825R1 using 3.43" lower sleeve seal O.D. only This 4-cylinder piston kit has a 3.250" overbore, flat top aluminum piston, and a 3.43" lower sleeve seal O.D. Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, sleeve sealing rings and engine gasket set. Super A ''some'' with C113 engine SN: 310300 - up & C123 engine SN: 35830 - up C ''some'' with C113 engine SN: 310300 - up

Specifications For 4.30" bore Includes: Cylinder head gasket Manifold gasket Valve cover gasket Carb to manifold gasket Water inlet gasket Water outlet Water outlet manifold gasket Oil pan gasket Front / rear crankshaft seals for your major engine overhaul Does not include front cover gasket or side inspection cover gaskets.

Base Engine Kit for diesel applications. Includes standard pistons w/rings, liners, complete gasket set with front and rear crank seals and connecting rod bushings. Rod or main bearings can be added separately. Please indicate the rod and main bearing sizes required when adding to Base Engine Kit. Part Reference Numbers: 3139591R96;D179 Fits Models: 2400 INDUST/CONST; 248; 3220 TRACTOR; 385 TRACTOR; 395 TRACTOR; 433 INDUST/CONST; 464 TRACTOR; 484; 485; 485XL TRACTOR; 495 INDUST/CONST; 533 TRACTOR; 540 INDUST/CONST; 633; 640; D179 ENG

Base Engine Kit: Includes standard pistons w/rings, liners, complete gasket set with front and rear crank seals and connecting rod bushings. Rod or main bearings can be added separately. Please indicate the rod and main bearing sizes required when adding to Base Engine Kit. Part Reference Numbers: 3139591R96;D239 Fits Models: 3220 TRACTOR; 4210 TRACTOR; 495 INDUST/CONST; 574 TRACTOR; 633; 674 TRACTOR; 684 TRACTOR; 685; 685XL TRACTOR; 695 TRACTOR; 695XL; 724; 743; 743XL; 744; 745S TRACTOR; 745XL; 833; 840 INDUST/CONST; 940; D239 ENG

Base Engine Kit: Includes standard pistons w/rings, liners, complete gasket set with front and rear crank seals and connecting rod bushings. Rod or main bearings can be added separately. Please indicate the rod and main bearing sizes required when adding to Base Engine Kit. Part Reference Numbers: 3139591R96 Fits Models: 1046 TRACTOR; 1055 SWATHER/WINDROWER; 1055XL; 1056 TRACTOR; 1056XL; 955 SWATHER/WINDROWER; 955XL; 956; 956XL; D358 ENG

Engine Base kit for C123 IH engine Overbore to 3.25 inches: Includes 4-Liners, 4-Liner seals, 4- Pistons, 4- Piston ring sets, 1- Complete gasket set with crank seals and 4-Conrod bushings. Rod and Main bearings are not included. Part Reference Numbers: 370147R1;370152R1 Fits Models: 100; 130; 140; 200; 230; 240; SUPER A; SUPER AV1; SUPER C

Engine Base kit for Cummins 4B 3.9L Naturally Aspirated Non-Emission diesel engine. Includes standard piston kits (3802060), complete gasket set with front and rear crank seals and connecting rod bushings. To maximize kit you would add 8 conrod bearing halves, 1 Main Bearing set and 1 (3901306 if Normal Block) or 1 (3940059 if Storm Block) Camshaft Bushing (Sold separately). If ordering rod or main bearings please indicate sizes required. Standard piston # is 3906223. If Conrods are fracture Split you will need (4) 3901170 (or O/S) and (4) 4893693 (or O/S) on Conrod bearings. Part Reference Numbers: 3802060;3906223 Fits Models: 1840 SKID STEER; 1845C SKID STEER; 450C CRAWLER; 455C CRAWLER; 480E INDUST/CONST; 480ELL INDUST/CONST; 480F INDUST/CONST; 480FLL INDUST/CONST; 550 DOZER; 550E DOZER; 580K INDUST/CONST; 580SE INDUST/CONST; 584E INDUST/CONST; 585E INDUST/CONST; 586E INDUST/CONST; 6000 WINDROWER; 6500 WINDROWER; 660 TRENCHER; 760 TRENCHER; 8820 WINDROWER; 8830 WINDROWER

Engine Base kit for Cummins 4BT 3.9 Turbocharged Non-Emission engine. Includes standard piston kits (3802160), complete gasket set with front and rear crank seals and connecting rod bushings. To maximize kit you would add 8 conrod bearing halves, 1 Main Bearing set and 1 (3901306 if Normal Block) or 1 (3940059 if Storm Block) Camshaft Bushing (Sold separately). If ordering rod or main bearings please indicate sizes required. Standard piston # is 3907163. If Conrods are fracture Split you will need 4 3901170 (or O/S) and 4 4893693 (or O/S) on Conrod bearings. Part Reference Numbers: 3802160;3907163 Fits Models: 450C CRAWLER; 455C CRAWLER; 4T-390 ENG; 5120 TRACTOR; 5220; 550 DOZER; 550E DOZER; 570LXT INDUST/CONST; 580K INDUST/CONST; 580L INDUST/CONST; 580SE INDUST/CONST; 650G CRAWLER; 688 INDUST/CONST; 860 TRENCHER; 8840 WINDROWER; 9010 INDUST/CONST; W11B LOADER

Engine Base kit for Cummins 4BTA 3.9 Turbocharged Aftercooled Emission engine. Includes standard piston kits (3802747), complete gasket set with front and rear crank seals and connecting rod bushings. To maximize kit you would add 8 conrod bearing halves, 1 Main Bearing set and 1 (3901306 if Normal Block) or 1 (3940059 if Storm Block) Camshaft Bushing (Sold separately). If ordering rod or main bearings please indicate sizes required. Standard piston # is 3928673. If Conrods are fracture Split you will need 4 3901170 (or O/S) and 4 4893693 (or O/S) on Conrod bearings. Part Reference Numbers: 3802747;3904166 Fits Models: 4T-390 ENG; 570LXT SERIES 2 INDUST/CONST; 580L INDUST/CONST; 650G CRAWLER; 686G INDUST/CONST; 686GXR INDUST/CONST; 8860 WINDROWER; 8870 SWATHER/WINDROWER; 9010B EXCAVATOR; 9020B EXCAVATOR; 90XT SKID STEER; 95XT SKID STEER

Engine Base kit for Cummins 6BT 5.9 Turbocharged Non-Emission engine. Includes standard piston kits (3802160), complete gasket set with front and rear crank seals and connecting rod bushings. To maximize kit you would add 12 conrod bearing halves, 1 Main Bearing set and 1 (3901306 if Normal Block) or 1 (3940059 if Storm Block) Camshaft Bushing (Sold separately). If ordering rod or main bearings please indicate sizes required. Standard piston # is 3907163. If Conrods are fracture Split you will need 6 3901170 ( or O/S) and 6 4893693 (or O/S) on Conrod bearings. Part Reference Numbers: 3802160 Fits Models: 1085B INDUST/CONST; 1085C INDUST/CONST; 1088 INDUST/CONST; 1150E CRAWLER LOADER; 1150G CRAWLER LOADER; 1155E CRAWLER LOADER; 1896 TRACTOR; 5140 TRACTOR; 5240 TRACTOR; 5250 TRACTOR; 621 WHEEL LOADER; 621B WHEEL LOADER; 680L INDUST/CONST; 6T-590 ENG; 780C INDUST/CONST; 780D INDUST/CONST; 850D DOZER; 850E DOZER; 855D CRAWLER LOADER; 855E CRAWLER LOADER; 880D INDUST/CONST; 8850 WINDROWER; 888 EXCAVATOR; 9030 EXCAVATOR; 9030B EXCAVATOR; W14B LOADER; W14C LOADER

Engine Base kit for Cummins 6CT 8.3 Turbocharged engine. Includes standard piston kits (3802400), complete gasket set with front and rear crank seals and connecting rod bushings. To maximize kit you would add 12 conrod bearing halves, 1 Main Bearing set and 1 (3943199) Camshaft Bushing (Sold separately). If ordering rod or main bearings please indicate sizes required. Standard piston # is 3923163. This kit fits block # 3802265 with Thin Wall Liners. Part Reference Numbers: 3802400;3923163 Fits Models: 1150E CRAWLER LOADER; 1155E CRAWLER LOADER; 1187C INDUST/CONST; 1550 DOZER; 1660 COMBINE; 1666 COMBINE; 1670 HILLSIDE COMBINE; 1680 COMBINE; 2044 COTTON PICKER; 2166 COMBINE; 6T-830 ENG; 7110 TRACTOR; 7120 TRACTOR; 7130 TRACTOR; 7140 TRACTOR; 7150; 721 WHEEL LOADER; 7210; 721B INDUST/CONST; 7220; 821 INDUST/CONST; 821B INDUST/CONST; 9040 EXCAVATOR; 9040B EXCAVATOR; 9110; 9130; 9210; 9230; 9240; 9310; CASE ENG; W36

Engine Base kit for Cummins 6CTA 8.3 Turbocharged Aftercooled engine. Includes standard piston kits (3802401), complete gasket set with front and rear crank seals and connecting rod bushings. To maximize kit you would add 12 conrod bearing halves, 1 Main Bearing set and 1 (3943199) Camshaft Bushing (Sold separately). If ordering rod or main bearings please indicate sizes required. Standard piston # is 3923164. This kit fits block # 3802265 with Thin Wall Liners. Part Reference Numbers: 3802401;3923164 Fits Models: 1670 HILLSIDE COMBINE; 1680 COMBINE; 1688 COMBINE; 1844 COTTON PICKER; 2044 COTTON PICKER; 2055 COTTON PICKER; 2155 COTTON PICKER; 2188 COMBINE; 7140 TRACTOR; 7150; 9230; 9240; 9330; CASE ENG

Kit contains Standard Pistons (3 1/2" Bore), Piston Pins, Piston Bushings, Rings, Sleeves, Sleeve Seals and Complete Gasket set with Front and Rear Crank Seals. Rod and Main bearings not included. Please let us know the size Rod and Main bearings you may need for this kit. Part Reference Numbers: 3044479R94 Fits Models: B414; BD154 ENG

Specifications Includes: 1 - Piston & Pin 1 - Piston Ring Set 1 - Finished Liner 1 - Liner Seal

Our kit includes Piston Pin Lock Pins 3.125" bore

Our kit includes 3-7/16" bore piston Pin (43793D) Lock Pins (16014DA)

Specifications Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.645" bore size. Piston to cylinder clearance is .001 per inch of bore

Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.655" bore size. Piston to cylinder clearance is .001 per inch of bore

Specifications Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.685" bore size. Other Application Info Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.685" bore size. Piston to cylinder clearance is .001 per inch of bore CUB CUB LO BOY

This 4-cylinder kit has a 3.4375" overbore and stepped head pistons. Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers. Most other sets available by special order.

This 4-cylinder kit has a 4" overbore. Includes sleeves, aluminum stepped head pistons, piston ring sets, piston pins and pin retainers. Most other sets available by special order. 1.312" wrist pin O.D. Sleeve O.D. (cold) 4.124"