Marvel Schebler type Carburetor for C113 gas engines. Includes carb mounting gasket and mounting studs are 2 3/8" CTC. Part Reference Numbers: 352376R92;354184R93;355485R91;373957R91;52499DB;69401D;TSX156;TSX157;TSX319 Fits Models: A; AV; B; BN; C; SUPER A; SUPER C If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

Specifications Repair kit includes: Needle and seat Float lever pin Gaskets Graphite packing (for main adjusting needle) Idle adjusting spring Idle adjusting needle Throttle shaft Felt packing (throttle shaft seal) Instructions Note: The instruction sheet and diagram show parts that are not included in this kit. These parts are shown for reassembly purposes only. O12 with IHC carburetor O14 with IHC carburetor W12 with IHC carburetor W14 with IHC carburetor F12 with IHC carburetor F14

Specifications Kit includes: throttle shaft (original style with cast iron arm) needle and seat float lever pin choke and throttle shaft seal needle valve idle adjustment screw with graphite packing friction ball gaskets and instructions 560 656 660 706 756 766 806 826 856

BASIC CARBURETOR REPAIR KIT (ZENITH) --- MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!!KIT CONTAINS: THROTTLE SHAFT, NEEDLE & SEAT, FLOAT LEVER PIN, CHOKE & THROTTLE SHAFT SEALS, NEEDLE VALVE, ADJUSTMENT SCREW, GASKETS & INSTRUCTIONS. --- Carburetor Manufacturer #: 9749, 9752 --- International Applications: A, B, BN, C, SUPER A, AV

Specifications New Zenith carburetor, not rebuilt 2-11/16" center-to-center mounting studs 1.299" throttle bore 3/8" fuel inlet 2.040" housing outside diameter for air cleaner hose Zenith Carburetor 14996A Note: Carburetors are limited to replacement only. Warranty void / replacement not offered if rust, dirt, etc. is found in the carburetor or if it has been taken apart. 454 464 504 544 574 656 666 throttle shaft and choke shaft must be disassembled and remounted on the opposite side 674 686

Carburetor Float For Farmall: 2400, 2500A, 2500B, 2504, 2544, 2656, 3514, 454, 464, 504, 544, 574, 656, 666, 674, 686. Replaces International PN#: 381962r1 Picture Is For Reference Only Marvel Scheibler Carburetors: TSX1001, TSX181, TSX221, TSX245, TSX296, TSX332, TSX360, TSX374, TSX397, TSX413, TSX414, TSX436, TSX464, TSX466, TSX475, TSX492, TSX505, TSX505A, TSX506, TSX526, TSX528, TSX530, TSX561, TSX562, TSX563, TSX575, TSX582, TSX592, TSX596, TSX602, TSX610, TSX615, TSX633, TSX639, TSX641, TSX645, TSX648, TSX662, TSX678, TSX688, TSX689, TSX695, TSX704, TSX711, TSX713, TSX719, TSX721, TSX725, TSX732, TSX737, TSX738, TSX755, TSX756, TSX757, TSX768, TSX769, TSX772, TSX773, TSX774, TSX775, TSX777, TSX784, TSX788, TSX791, TSX792, TSX797, TSX798, TSX799, TSX800, TSX801, TSX806, TSX808, TSX810, TSX811, TSX813, TSX814, TSX816, TSX819, TSX825, TSX835, TSX836, TSX840, TSX843, TSX846, TSX853, TSX854, TSX856, TSX857, TSX869, TSX871, TSX877, TSX878, TSX881, TSX883, TSX884, TSX885, TSX886, TSX888, TSX889, TSX892, TSX892S, TSX893, TSX894, TSX895, TSX897, TSX898, TSX899, TSX900, TSX902, TSX903, TSX904, TSX904SL, TSX905, TSX905-1, TSX905SL, TSX906, TSX906SL, TSX907, TSX907SL, TSX908, TSX908SL, TSX911, TSX917, TSX920, TSX920SL, TSX921, TSX921SL, TSX922, TSX922SL, TSX923, TSX923SL, TSX925, TSX927, TSX928, TSX932, TSX932SL, TSX933, TSX934, TSX936, TSX938, TSX938SL, TSX939, TSX940, TSX941, TSX941SL, TSX944SL, TSX945SL, TSX946, TSX947SL, TSX950, TSX952, TSX959, TSX966, TSX97, TSX970, TSX972, TSX973, TSX974, TSX975, TSX977, TSX980, TSX984SL, TSX985SL, TSX988, TSX989, TSX992, TSX993, TSX994, TSX997, TSX998, TSXU835, TSXU836, TSXU840, TSXU908SL, TSXU963

46370D

Specifications 5-piece gasket kit For small bowl Marvel Schebler carburetors 4-5/16" overall length of the bowl gasket A some AV some Super A some Super AV some Super AV-1 some B some BN some C some Super C some T340 some Crawler T5 some Crawler 100 some 130 some 140 some 200 some 230 some 240 some 330 some 340 some 404 some 424 some early 444 some early 504

COMPLETE CARBURETOR REPAIR KIT (IH CARB) --- KIT CONTAINS: CHOKE & THROTTLE SHAFTS, NEEDLE & SEAT VALVE, FLOAT LEVER PIN, MISCELLANEOUS PLUGS & SCREWS, THROTTLE SHAFT SEALS & GASKETS FITS LISTED CARB WITH THROTTLE BODY: 8867DX SHAFT LENGTH = 3.314"" CHOKE AND THROTTLE SHAFT GASKETS, NEEDLE VALV --- Carburetor Manufacturer #: 50983 --- International Applications: M, MV, 6 SERIES

COMPLETE CARBURETOR REPAIR KIT (ZENITH) MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS!!!!! KIT CONTAINS: CHOKE & THROTTLE SHAFTS, NEEDLE & SEAT VALVE, FLOAT LEVER PIN, MISCELLANEOUS PLUGS & SCREWS, THROTTLE SHAFT SEALS & GASKETS Carburetor Manufacturer #: 10514A International Applications: A, B, SUPER A, AV

Specifications Many Carter carburetors are missing the tag and can not be identified. This kit has all five bowl gasket variations along with both style needles and seats fitting all Carter carburetors. Super A Super AV C Super C 100 130 140 200 230

Specifications Kit includes: Needle and seat gaskets and instructions (includes extra gaskets allowing it to fit all the British Zenith carburetors used on the below listed models B-250 with BC144 engine, using British Zenith carb numbers VN, VNN, VNP, 3044193R92, C1751, C1759, 3106595R91, 3063945R91 B-275 with BC144 engine, using British Zenith carb numbers VN, VNN, VNP, 3044193R92, C1751, C1759, 3106595R91, 3063945R91 B-414 with BC144 engine, using British Zenith carb numbers VN, VNN, VNP, 3044193R92, C1751, C1759, 3106595R91, 3063945R91 354 with BC144 engine, using British Zenith carb numbers VN, VNN, VNP, 3044193R92, C1751, C1759, 3106595R91, 3063945R91 444

Specifications This is a NEW carburetor, not rebuilt. Mounting studs are 2-3/8" center to center. The throttle body throat size is 1-3/16" diameter. The choke air horn (air inlet) measures 1-3/4" OD. The carburetor mounting gasket is included. I4 H HV O4 OS4 W4

Brass material float chambers. W/o pin. Part Reference Numbers: 69919D;B51772 Fits Models: 200; 300; 330; 340 TRACTOR; A; B; SUPER A; V; VA

Shaft ID #10. Pinch Bolt #8. Part Reference Numbers: 352376R92;354184R93;355485R91;373957R91;52499DB;69401D;TSX156;TSX157;TSX319 Fits Models: A; AV; B; BN; C; SUPER A; SUPER C

Minor kit for Carter style carb. Part Reference Numbers: BK200V;CCK01 Fits Models: C; SUPER A; SUPER AV; SUPER C

For 1 1/4" and 1 3/8" updraft IH Carbs. Part Reference Numbers: C554V;MSCK25 Fits Models: VA; VAC

Basic carburetor repair kit for Zenith carburetors number 11115, and International carburetor number 355485R91 Part Reference Numbers: BK9BV Fits Models: A; AV; B; BN; C; SUPER A; SUPER C

Kit contains all parts necessary for major carburetor overhaul. Part Reference Numbers: 50981DA;C510HV Fits Models: H; HV; W4

Kit contains all parts necessary for major carburetor overhaul. Fits International carburetor 50983DB. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. Part Reference Numbers: C514V Fits Models: M; MV; W6

Major kit for IH carburetor 358065R91 Part Reference Numbers: IHCK06 Fits Models: H

Major kit for Marvel Schebler TSX43. Part Reference Numbers: C555V;MSCK28 Fits Models: V

Major kit for Zenith 11115 and IH 355485R91. Part Reference Numbers: C509BV;ZCK11 Fits Models: SUPER A; SUPER C

Major kit for Zenith 6496, 6699, 6817 and K5 carburetor. Part Reference Numbers: ZCK13 Fits Models: F20; F30

Major kit for Zenith 8954 or IH 04990AB. Part Reference Numbers: C551V;ZCK20 Fits Models: C

Major Kit for Zenith 9667 or Case/IH # 05571AB. Part Reference Numbers: BK52V;C552V;ZCK16 Fits Models: S

Minor carburetor kit includes gaskets, float valve & throttle shaft. Fits Zenith carburetors numbers 12122/68X7, 12711/68X7 and International numbers 366462R91, and 385608R91. Part Reference Numbers: BK123V Fits Models: 130; 140

Minor economy kit For Marvel Schebler TSX253, TSX663, TSX114, TSX597, TSX635, TSX696, TSX156, TSX730, TSX744, TSX748, TSX827, TSX348, TSX13, TSX45, TSX60, TSX89, TSX90, TSX91 and TSX860. Contains Gasket set and needle with seat. Part Reference Numbers: MSCK10 Fits Models: 140; 200; 240; 300B TRACTOR; 330; 340 TRACTOR; 350; 400; 404; 480 INDUST/CONST; 500 CRAWLER; A; B; C; SUPER A; VA

Minor economy kit for Zenith 13328, 13106, 12534, 12509, 12685, 13384 and 13716. Contains Gasket set and Float valve. Part Reference Numbers: ZCK05 Fits Models: 300; 400; 500 CRAWLER; 504 TRACTOR; 544 TRACTOR; 580CK INDUST/CONST; 600 CRAWLER LOADER; 656; 666 TRACTOR

Minor kit for IH carberutor 24707DA, 24707BC, 39953D and 29953DA. Part Reference Numbers: IHCK03 Fits Models: F12; F14

Minor kit for IH numbers 251234R94 and 364579R91. Engine serial number 312389 and before. Part Reference Numbers: BK18;IHCK02 Fits Models: CUB

Minor kit for IH numbers 47387, 50983DB with 8867DX throttle body, 356948R92, 361525R92, 52814D, 52815D and 60329DA. Part Reference Numbers: BK12V;IHCK01 Fits Models: 300; 350; 400; 450; M; MV; Super H; Super M; SUPER MTA; W6; W9; WR9

Minor kit for IH numbers 50981DA or 45108DB Part Reference Numbers: BK10V;IHCK12 Fits Models: H; HV; W4

Minor kit for Marvel Schebler models TSX744 and TSX748. Part Reference Numbers: BK311;MSCK40 Fits Models: 200; 230; 240; 330; 340 TRACTOR

Minor kit for Marvel Schebler TSX857, TSX939, TSX684SL and TSX985. Part Reference Numbers: BK318;MSCK27 Fits Models: 2400A INDUST/CONST; 2400B INDUST/CONST; 2500A INDUST/CONST; 2500B INDUST/CONST; 454; 464 TRACTOR; 574 TRACTOR; 674 TRACTOR

Minor kit for Zenith 12115, 12122, 12225, 12285 and 13781. Part Reference Numbers: ZCK03 Fits Models: 130; 230; 240; 330; 340 TRACTOR; CUB

Minor kit for zenith 13794 and 68YY7 or IH 71523C9. Engine serial # 312390 and up. Part Reference Numbers: ZCK22 Fits Models: CUB

Minor kit for Zenith 9752, 10514A or IH 52499D and 352376R92. Part Reference Numbers: BK9V Fits Models: A; AV; B; SUPER A

Part Reference Numbers: 47398DX Fits Models: 2606 INDUST/CONST; 2706 INDUST/CONST; 300; 350; 400; 460 INDUST/CONST; 560; 600 CRAWLER LOADER; 606 TRACTOR; 650 INDUST/CONST; 660 CULTIVATOR; 706; H; HV; M; MV; O6; OS6; Super M; SUPER W6; W450; W6; W9; WR9S

Float, for large bowl Marvel Schebler carburetors TSX662 and TSX613 Part Reference Numbers: 381962R1 Fits Models: 430; 530; 630