Fits Carb Number 50981DA Carburetor kits contain gasket, needle & seat and other small parts to complete a carburetor rebuild.

Carb throttle shaft - new Old stock Cub Lo-Boy 154 - 405027R1

CARBURETOR --- LOOKS DIFFERENT, WORKS GREAT --- DOWN DRAFT --- Carburetor Manufacturer #: 3063945R91, 3044193R92 --- International Applications: B414, 3414, 3444, 354, 7000 FORKLIFT W/ BC-144 GAS ENGINES, 2300 SERIES A --- Replacement Part #: IH: 3063945R91, 3044193R92 If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

New CARBURETOR (MARVEL SCHEBLER) --- 2-3/8" C.C. BOLT HOLES --- Carburetor Manufacturer #: TSX157, TSX156, TSX319 --- International Applications: A, AV, B, BN, C, SUPER A, SUPER C If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

CARBURETOR (ZENITH) --- NEW ZENITH REPLACEMENT --- ON OLDER CUBS, YOU MAY HAVE TO USE 2 CARB GASKETS TO CLEAR THE BUTTERFLY. --- Carburetor Manufacturer #: 13781, 13794 --- International Applications: FOLLOWING WITH ENGINE SERIAL NUMBER 312390 & UP, CUB, CUB LOBOY 154 --- Replacement Part #: 70949R92 If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

This is a TSX-857. If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

Later Cubs used a International built carburetor with a bigger bore than the early Farmall Cub tractors. We take original carburetors and completely rebuild them to factory spec. This carb is better than new. All threads have been Heli-Coiled, making them stronger than new. The following parts are replaced, fuel inlet port screen, needle &seat, main discharge nozzle, idle pickup tube, main metering jet, correct gaskets and seals, all new original choke and throttle shafts and includes a rare choke lever, which no one else can do. The manifold mounting surface is machined flat and level (important for proper operation) with correct sized studs to mount carb to manifold. Also the cover and bowl mating surfaces are machined flat for a perfect fit and connected with 4-new stainless steel Fillister screws and lock washers. If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

These brand new carburetors will work on all years of Farmall Cub. Cubs built prior to 1969 require a conversion to cable choke instead of rod choke. This is a Zenith carburetor. Your best bet is the rebuilt carburetor we sell as FP24267, but this will work if you prefer brand new over rebuilt. If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

All rebuilt carburetors are torn down, cleaned, inspected and fixed to make the unit look and perform like new. Cost is exchange. A core charge will be charged to your card until we receive your REBUILDABLE core. A good core is considered a housing with no cracks, weld repairs, busted screw ears, damaged or missing parts. Any core returned in a condition less than described above, WILL NOT be credited. CALL if you have questions. PLEASE RETURN YOUR CORE!! Our rebuilt Farmall H carburetors replace 45108DB, 50981DC. If you get this carb and do not like it, you can return it within 30 days. If it comes into contact with fuel, it becomes NOT RETURNABLE. If for any reason, this carb smells like fuel, it is NOT Returnable. IF YOU DECIDE TO USE THIS CARB, FLUSH OUT THE ENTIRE FUEL SYSTEM. PUT IN A NEW FUEL FILTER AND CLEAN OUT THE FUEL PUMP BOWL. THE SMALLEST AMOUNT OF DEBRIS IN THE FUEL LINES CAN DISABLE YOUR CARB. NO CARB THAT HAS COME INTO CONTACT WITH FUEL IS RETURNABLE.

B280971, This is a Zenith Model 29 carburetor for a WWII-era M5 high speed tractor (typically used to haul artillery). It is new old stock and thus never installed. Carburetor B280971, Zenith Model 29 Carburetor for M5 Tractor - New Old Stock

ID9 all with F8 starting diesel carburetors MD all with F8 starting diesel carburetors Super MD all with F8 starting diesel carburetors Super MDV all with F8 starting diesel carburetors MDV all with F8 starting diesel carburetors Super MDV-TA all with F8 starting diesel carburetors ODS6 all with F8 starting diesel carburetors TD6 all with F8 starting diesel carburetors Super WD6 all with F8 starting diesel carburetors WD6 all with F8 starting diesel carburetors Super WD9 all with F8 starting diesel carburetors Super WDR9 all with F8 starting diesel carburetors WD9 all with F8 starting diesel carburetors WDR9 all with F8 starting diesel carburetors 400 all with F8 starting diesel carburetors W400 all with F8 starting diesel carburetors 450 all with F8 starting diesel carburetors W450 all with F8 starting diesel carburetors 600 all with F8 starting diesel carburetors 650

Carburetor Elbow with strainer assembly This carburetor elbow with strainer assembly fits the models listed when they are equipped with a 5/16" outside diameter fuel line. Please check the fuel line size before ordering 1/8" male threads A Following with listed Carter, Marvel Schebler & Zenith carbs, using 5/16" O.D. fuel line Super A Following with listed Carter, Marvel Schebler

Carburetor Elbow with strainer assembly (for 1/4" OD fuel line) Please check your line size before ordering! Lines are measured by inside diameter. 1/8" male threads The screen is 3/4" long The pipe measures 1/8" by 1/4" compression

FLOAT FOR IH CUB FITS ALL IHC MADE CUB CARBURETORS; 251234R94, 364579R91, 405004R91, 63349C91, This does not fit the Zenith Carb that some Cubs used.

CARBURETOR FLOAT (MARVEL SCHEBLER), MAKE SURE THAT YOUR CARBURETOR MANUFACTURER NUMBER IS IN THE LIST THIS FITS! FOR SMALL BOWL MARVEL SCHEBLER CARBS - Carburetor Manufacturer #: TSX13, TSX28, TSX30, TSX33, TSX34, TSX36, TSX38, TSX42, TSX43, TSX45, TSX55, TSX60, TSX74, TSX83, TSX85, TSX88, TSX89, TSX90, TSX91, TSX114, TSX120, TSX138, TSX154, TSX155, TSX156, TSX157, TSX159, TSX188, TSX193, TSX194, TSX212, TSX228, TSX231, TSX237, TS - International Farmall A, SUPER A, B, C, SUPER C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, T340 CRAWLER, T5 CRAWLER -Replacement Part #: Farmall 69919D

Carburetor float fits International 504, 656, 666, 674, 454, 464, 574, 674, 2400A, 544, 1454, 1574 Fis these carb numbers. TSX985, TSX946, TSX934, TSX940, TSX939, TSX984sl, TSX985sl, TSX980, TSX974, TSX927, TSX857,

CARBURETOR FLOAT --- International Applications: F12, F14 W/ IHC CARBURETOR, I14, O14, W14, I12, O12, W12 --- Replacement Part #: 25945DA

Carburetor Float fits Super H, M, Super M, 300, 350, 400, 450, 560, 660, 706, 756, 806, 826, 856.

Fuel bowl for Farmall tractor carburetor. 376439R91

CARBURETOR GASKET (CARB TO MANIFOLD MOUNTING GASKET) --- 1-13/16" C - C BOLTS, 15/16" CENTER HOLE --- International Applications: FOR USE WITH IH CARB ON FOLLOWING MODELS: CUB (UP TO SN 196899), EARLY 154 --- Replacement Part #: IH: 251235RI

Carburetor Gasket Kit Super H Using listed IH carburetors Super HV Using listed IH carburetors M Using listed IH carburetors Super MTA Using listed IH carburetors MV Using listed IH carburetors Super MV Using listed IH carburetors Super MVTA Using listed IH carburetors O6 Using listed IH carburetors OS4 Using listed IH carburetors OS6 Using listed IH carburetors T6 Using listed IH carburetors Super W4 Using listed IH carburetors Super W6 Using listed IH carburetors Super W6TA Using listed IH carburetors W6 Using listed IH carburetors 352063R91 356948R92 357231R92 358065R91 358554R91 361525R92 362173R92 362957R91 363741R93 367258R92 367259R91 367259R92 372723R92 378196R94 379813R95 380956R96 381984R95 386424R96 387182R92 388296R92 388424R96 388425R96 396197R93 396198R91 406803R91 406804R91 47387DA 47387DB 47387DC 50983DA 50983DB 50983DC 52814D 52815D 533622R91 534932R91 534933R91 539575R91 60329DA

These are the 2 gaskets needed for an MD, Super MD, 400D, 450D, WD6, Super WD6, WD9, Super WD9 carburetor.

These 2 gaskets fit the carburetor on the gas start diesel engines.

Carburetor rebuild kit for an F30.

IH TRACTOR: M (With OEM Carb.# 50983DB / Throttle Body# 8867DX) MV (With OEM Carb.# 50983DB / Throttle Body# 8867DX) W6 (W/ OEM Carb.# 50983DB / Throttle Body# 8867DX)

Farmall; Super H, 300, 350, 400, 450, 560, 660, 706, 756, 806, 826, 856. Inernational carburetor numbers: 381984R91, 379813R93, 361525R92, 362173R91, 386424R96, 388425R96

fits Farmall H, HV, W4. This kit contains all the gaskets, as well as all the replacement shafts. This is a very comprehensive kit.

Carb No. 24707DA, 29953DA Carburetor kits contain Gasket, Needle & seat and other small parts to complete a Carburetor rebuild.

Carburetor Nozzle 0.100" Cub with IH Carburetor 1957 - 1974 large bore Cub Loboy with IH Carburetor 1957 - 1974 large bore 154 with IH Carburetor 1957 - 1974 large bore Brass finish 0.3125" hex 1.777" long 0.122" tube O.D. 0.100" I.D. 6 discharge holes

Basic carburetor repair kit to repair the Marvel-Schebler carburetor used in Farmall 200, 230, 240, 330, 340, I340 manufacturer # TSX744, TSX896, 748, 424, 444, 2444 manufacturer # TSX896 Kit includes gaskets, float valve and throttle shaft.

International A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240 Zenith carburetor numbers 9752, 10514A, 12613, 12632

This kit is for a 130 or 140 with Zenith carburetor 12122 or 12911.

Fits Carb Number TSX156, TSX157. Floats are available separatley, Call for price Carburetor kits contain Gasket, Needle & seat and other small parts to complete a Carburetor rebuild.

Fits International carb numbers: 405004R91, 63349C91 Carburetor kits contain gasket, Needle & seat and other small parts to complete a carburetor rebuild.

Fits carb number 45108DB and 50981DA. Floats are available separatly, see FP 25177 Carburetor kits contain gaskets, needle & seat and other small parts to complete a carburetor rebuild.