Specifications 2-3/16" - 12 RH thread A SN: 7014 and up I4 AV SN: 7014 and up Super A Super A-1 Super AV-1 B SN: 7014 and up BN SN: 7014 and up C Super C H HV Super H Super HV M MD Super M Super MD Super MDV MDV Super MDV-TA MTA Super MTA Super MTA diesel MV Super MV Super MVTA O4 O6 ODS6 OS4 OS6 Super W4 W4 Super W6TA W6 Super WD6 WD6 100 130 140 200 230 240 300 Farmall 340 Farmall 350 Farmall 400 Farmall 404 424 without power steering 444 without power steering 450 British 450 Farmall 504

H HV Super H Super HV 300 Farmall 350

This seal is on the steering shaft at the steering box.

Specifications 1.000" inside diameter 1.129" outside diameter 1.252" overall length 0.065" thick A mounts in steering gear housing I4 mounts in steering gearbox housing for worm shaft rear bushing AV mounts in steering gear housing Super A mounts in steering gear housing Super A-1 mounts in steering gear housing Super AV mounts in steering gear housing Super AV-1 mounts in steering gear housing B mounts in steering gear housing BMD mounts in upper bolster housing BN mounts in steering gear housing Super C mounts in steering gear housing H mounts in upper bolster housing HV mounts in upper bolster housing Super H mounts in upper bolster housing Super HV mounts in upper bolster housing M mounts in upper bolster housing MD mounts in upper bolster housing Super M mounts in upper bolster housing Super MD mounts in upper bolster housing Super MDV mounts in upper bolster housing MDV mounts in upper bolster housing Super MDV-TA mounts in upper bolster housing MTA mounts in upper bolster housing Super MTA mounts in upper bolster housing Super MTA diesel mounts in upper bolster housing MV mounts in upper bolster housing Super MV mounts in upper bolster housing Super MVTA mounts in upper bolster housing O4 mounts in steering gearbox housing for worm shaft rear bushing O6 mounts in steering gearbox housing for worm shaft rear bushing ODS6 mounts in steering gearbox housing for worm shaft rear bushing OS4 mounts in steering gearbox housing for worm shaft rear bushing OS6 mounts in steering gearbox housing for worm shaft rear bushing Super W4 mounts in steering gearbox housing for worm shaft rear bushing W4 mounts in steering gearbox housing for worm shaft rear bushing Super W6 mounts in steering gearbox housing for worm shaft rear bushing Super W6TA mounts in steering gearbox housing for worm shaft rear bushing W6 mounts in steering gearbox housing for worm shaft rear bushing Super WD6 mounts in steering gearbox housing for worm shaft rear bushing 100 mounts in steering gear housing 130 mounts in steering gear housing 140 mounts in steering gear housing 200 mounts in steering gear housing 230 mounts in steering gear housing 240 mounts in steering gear housing 300 F300 mounts in upper bolster housing 340 F340 mounts in upper bolster housing 350 F350 mounts in upper bolster housing 400 F400 mounts in upper bolster housing 450 F450 mounts in upper bolster housing B-450

Loose steering worm wheel shaft? Put a new bushing and tighten it up.

This is the seal for the vertical shaft on the B, BN, C and Super C. Each seal sold separately. Each tractor needs two seals.

Specifications 10 piece kit. Includes: (1) Body Gasket 371543R1 (2) Back up washers 355202R1 (sub for 368635R1) (2) O-rings 86553262 (sub for 253070R1) (2) O-rings 364879R1 (2) O-rings 14453280 (sub for 371544R1) (1) O-ring 371545R1 340 all using Thompson pump #''s 370924R91, 370924R92, 378865R91, 381115R91, C768-35HP, FR922100 460 all using Thompson pump #''s 370924R91, 370924R92, 378865R91, 381115R91, C768-35HP, FR922100 504 all using Thompson pump #''s 370924R91, 370924R92, 378865R91, 381115R91, C768-35HP, FR922100 560 all using Thompson pump #''s 370924R91, 370924R92, 378865R91, 381115R91, C768-35HP, FR922100 606 all using Thompson pump #''s 370924R91, 370924R92, 378865R91, 381115R91, C768-35HP, FR922100 656 F656 up to SN: 13011 all using Thompson pump #''s 370924R91, 370924R92, 378865R91, 381115R91, C768-35HP, FR922100 826 all using Thompson pump #''s 370924R91, 370924R92, 378865R91, 381115R91, C768-35HP, FR922100 1026

Specifications This tie rod bar measures 12 9/16" long, and has 5 notchs, 1/2" - 20 NF thread on one end. Two (2) used per tractor, sold individually. Will not fit 154, 184, 185. CUB LO BOY

Tie Rod End For Farmall: 100, 130, 140, 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 2400a, 2404, 2424, 2444, 2504, C, Cub, Cub Lo-Boy, Super A, Super A-1, Super AV, Super AV-1, Super C. 3.062" Long, 0.687" Diameter With 18 Right Hand Thread. Replaces IH PN#: 356540r1, 356540r91, 356540r91

TILT STEERING WHEEL CAP --- International Applications: FITS THE FOLLOWING WITH TILT WHEEL: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2806 --- Replacement Part #: 400220R1

UNIVERSAL TIE ROD BOOT --- BASE x HEIGHT x HOLE I.D. --- 1.675 X .900 X .625 --- International Applications: LATE H, SUPER H, M, MD, SUPER M, SUPER MD, MTA, SUPER MTA, 300 ROWCROP, 350 ROWCROP, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, HYDRO 70, HYD --- Replacement Part #: CNH: 87538419, IH: 358900R1, 359982R1, 387280R1

There are two upper bolster bushings, a top one and a lower one. This bushing is the top one and it is on the vertical shaft, below the worm gear.

This is the upper felt washer and it goes on the vertical steering shaft.

This is the upper bearing.

Thes are NOS (new old stock) valve keepers for an F20.

Specifications Range: 2-1/2" to 3-1/2" Band width: 1/2" Fits hose size 2-3/8" to 3-1/2" I.D. Hexhead: 5/16" screw and band Premium stainless steel Priced and sold in box's of 10

This is the seal for the vertical shaft that hooks to the steering arm, if your steering box leaks at the shaft you need this seal. The steering arm is located below the radiator and goes between the steering box and the tie rods.

This is on the vertical steering shaft.