Part Reference Numbers: 1543262C1 Fits Models: 1150C CRAWLER LOADER; 1150D CRAWLER LOADER; 1155D CRAWLER LOADER; 350B LOADER; 480C INDUST/CONST; 480F INDUST/CONST; 480FLL INDUST/CONST; 580C INDUST/CONST; 580D INDUST/CONST; 580K INDUST/CONST; 580SD INDUST/CONST; 580SE INDUST/CONST; 580SK INDUST/CONST; 680K INDUST/CONST; 680L INDUST/CONST; W14L

Part Reference Numbers: 527542R92 Fits Models: 2400A INDUST/CONST; 2400B INDUST/CONST; 248; 2500 INDUST/CONST; 258; 278 TRACTOR; 385 TRACTOR; 454; 464 TRACTOR; 474 TRACTOR; 484; 485; 574 TRACTOR; 584 TRACTOR; 674 TRACTOR; 684 TRACTOR; 685; 784; 785; 884; 885

Note: For models w/o cab. For production dates of 5001 to 5287, and 18001~on. Part Reference Numbers: 1287843C92 Fits Models: 3220 TRACTOR; 3230 TRACTOR; 385 TRACTOR; 395 TRACTOR; 4210 TRACTOR; 4230 TRACTOR; 4240 TRACTOR; 485; 495 INDUST/CONST; 595 TRACTOR; 685; 695 TRACTOR; 885; 895; 995; C100; C50; C60; C70; C80; C90

BUCKET CYLINDER Part Reference Numbers: 116339A1 Fits Models: 580L SERIES 2 INDUST/CONST; 580M SERIES 2 INDUST/CONST; 580M SERIES 3 INDUST/CONST; 580SL SERIES 2 INDUST/CONST; 580SM SERIES 2 INDUST/CONST; 580SM SERIES 3 INDUST/CONST; 580SM+ SERIES 2 INDUST/CONST; 580SM+ SERIES 3 INDUST/CONST; 590SL SERIES 2 INDUST/CONST; 590SM SERIES 2 INDUST/CONST; 590SM SERIES 3 INDUST/CONST

Outside diameter 2.995", inside diameter at bottom 2.475", height 3.020" at top of crown-height 2.64" at shoulder. Part Reference Numbers: 3044377R4;751363R91 Fits Models: 384 TRACTOR; 424 TRACTOR; 444 INDUST/CONST

Part Reference Numbers: 1543265C1

Part Reference Numbers: D148100;D83184

Part Reference Numbers: 1543271C1;G109421

Early production type cylinder, 3 1/4" from trunion to cylinder body end with threaded stub shaft on right hand side. Part Reference Numbers: 533279R93;533279R94 Fits Models: 1066 TRACTOR; 1466; 1468 TRACTOR; 1566 TRACTOR; 1568 TRACTOR; 766 TRACTOR; 966; HYDRO 100

Late production type cylinder, 2 1/4" from trunion to cylinder body end with threaded stub shaft on right hand side. 8" rod travel full L and R. Part Reference Numbers: 63864C93 Fits Models: 1066 TRACTOR; 1466; 1486 TRACTOR; 1566 TRACTOR; 1568 TRACTOR; 3088 TRACTOR; 3288 TRACTOR; 3688 TRACTOR; 766 TRACTOR; 886; 966; 986

Part Reference Numbers: 928751C96 Fits Models: 986

Part Reference Numbers: 1543266C1

Part Reference Numbers: 1543250C1;G109475

LIFT ALL CONTROL ROD SPRING / FLAT HOLD-DOWN SPRING --- FOR HYDRAULIC LIFT LEVER --- International Applications: FARMALL H, EARLY SUPER H, HV, M, MD, MV, SUPER M, SUPER MD, SUPER MDV --- Replacement Part #: 15137E

Manifold for 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, Hydro 70 or 86, with C263, C291, C301; 460, 606 with C221. Made in the USA

Manifold for 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, Hydro 70 or 86, with C263, C291, C301; 460, 606 with C221. 1/4 in. to 3/8 in. cut-out on hood. Exhaust only. Replaces OEM No. 384290R11.

Specifications 2.800" inside diameter 0.103" thick 90 Duro 2 used per tractor Model Note Equipment Information Hydro 100 Steering wheel cap O-ring Hydro 186 Steering wheel cap O-ring Hydro 84 Steering wheel cap O-ring Hydro 86 Steering wheel cap O-ring 140 Steering wheel cap O-ring 240 Steering wheel cap O-ring 330 Steering wheel cap O-ring 340 Steering wheel cap O-ring 350 Steering wheel cap O-ring 404 Steering wheel cap O-ring 424 Steering wheel cap O-ring 444 Steering wheel cap O-ring 450 Steering wheel cap O-ring 454 Steering wheel cap O-ring 460 Steering wheel cap O-ring 484 Steering wheel cap O-ring 504 Steering wheel cap O-ring 560 Steering wheel cap O-ring 574 Steering wheel cap O-ring 584 Steering wheel cap O-ring 660 Steering wheel cap O-ring 666 Steering wheel cap O-ring 674 Steering wheel cap O-ring 684 Steering wheel cap O-ring 686 Steering wheel cap O-ring 766 Steering wheel cap O-ring 786 Steering wheel cap O-ring 884 Steering wheel cap O-ring 886 Steering wheel cap O-ring 966 Steering wheel cap O-ring 986 Steering wheel cap O-ring 1066 Steering wheel cap O-ring 1086 Steering wheel cap O-ring 1466 Steering wheel cap O-ring 1468 Steering wheel cap O-ring 1486 Steering wheel cap O-ring 1586 Steering wheel cap O-ring 3088 4100 Steering wheel cap O-ring 4156 Steering wheel cap O-ring 4166 Steering wheel cap O-ring 4186 Steering wheel cap O-ring 4366 Steering wheel cap O-ring 4568 Steering wheel cap O-ring

these are small think o-rings that are about 2" in diameter

Specifications 2.030" overall length 0.445" O.D. 0.058" wire diameter Note: Continental flathead engines have the spring located on the right side of the block. For all overhead valve engines, including Continental and Case (except V, VC & VO), the spring is located in the oil pump. 350

Specifications 18 piece kit includes: (1) Gasket 350706R3 (1) Gasket 350708R2 (sub for 350708R1) (1) Quad ring G46055 (sub for 353186R1) (2) O-rings 86553262 (sub for 253070R1) (2) O-rings 75285739 (sub for 350667R1) (2) O-rings 353184R1 (2) O-rings 355202R1 (2) Washers 355048R1 (1) O-ring 353836R1 (1) Woodruff key 124543 (sub for 106749 & 126109) (1) Jam nut 124925 (sub for 114494) (1) Pin seal 353185R1 Super A The following using factory Pesco pumps Super A-1 The following using factory Pesco pumps Super AV The following using factory Pesco pumps Super AV-1 The following using factory Pesco pumps C The following using factory Pesco pumps Super C The following using factory Pesco pumps 100 The following using factory Pesco pumps 130 The following using factory Pesco pumps 140 The following using factory Pesco pumps 200 The following using factory Pesco pumps 230

Specifications 9-piece kit 240 all using Pesco pump # 368894R91 330 all using Pesco pump # 368894R91 340

If you have a worn relief ball in your hydraulic pump here is the new one you need.

Resevoir NEW OLD STOCK

Right Hand Rock Shaft Arm For Farmall: 100, 130, 140. Part451861R1

Specifications 11-piece kit Note: Models using 9 gpm Thompson hydraulic pump #'s 368633R91 and 368633R92. 240 The following with gas or LP using 9 gpm Thompson hydraulic pump #''s 368633R91, 368633R92 or 368632R91, 368632R92 330 The following with gas or LP using 9 gpm Thompson hydraulic pump #''s 368633R91 or 368633R92 340 The following with gas or LP using 9 gpm Thompson hydraulic pump #''s 368633R91, 368633R92 or 368632R91, 368632R92 404 The following with gas or LP using 9 gpm Thompson hydraulic pump #''s 368633R91, 368633R92 or 368632R91, 368632R92 424 The following with gas or LP using 9 gpm Thompson hydraulic pump #''s 368633R91, 368633R92 or 368632R91, 368632R92 444

Repairs Thompson pump #'s 360945R91 and 360945R92 hydraulic pumps. 9 piece kit. Includes: (1) Gasket 350708R2 (sub for 350708R1) (1) Gasket 350706R3 (1) Oil seal 385038R91 (sub for 353183R91) (1) Main body O-ring 510185 (sub 293726R1) (1) O-ring 352024R2 (2) O-rings 75285739 (sub for 350667R1) (1) Woodruff key 126-109 (sub for 106749) (1) Jam nut 124925 (sub for 114494) Super A The following using factory Thompson pumps Super A-1 The following using factory Thompson pumps Super AV The following using factory Thompson pumps Super AV-1 The following using factory Thompson pumps C The following using factory Thompson pumps Super C The following using factory Thompson pumps 100 The following using factory Thompson pumps 130 The following using factory Thompson pumps 140 The following using factory Thompson pumps 200 The following using factory Thompson pumps 230

Specifications 13-piece kit: Replacement numbers: 363783R93, kit 363783R94, kit Components: (1) gasket, 352439R1 & 352439R2 (1) gasket, 366783R1

This Tie rod end is about 6 " long and is pretty darned big. right hand thread with a thread diameter of 1.5 "

International 1066, 1466 hitch, 1566 series number 11256 or later, 1568 series number 7809 or later, 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 3088, 3288, 3488 and 3688 with Cat. III hitch cam limiter type IH Fits 1066 & 1466 hitch, 1566 above S/N 11256, 1568 above S/N 7809, 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788 & 3088, 3288, 3488, 3688, w/Cat.III hitch cam limiter type. Made in the USA

Hydrolic touch control Stop - Farmall Cub, Super A, C, Super C 100, 130, 140, 200 This little adjustable stop helps to lift or lower the implement to a consistent heighth or depth.

This is the stop used on your hydraulic lever.

Farmall 1046 (W/ D358 ENGINE), 1055 (W/ D358 ENGINE), 1056 (W/ D358 ENGINE), 1246 (W/ DT358 ENGINE), 385 (W/ D155 ENGINE), 484 (W/ D179 ENGINE), 485 (W/ D179 ENGINE), 584 (W/ D206 ENGINE), 585 (W/ D206 ENGINE), 644 (W/ D206 ENGINE), 684 (W/ D239 ENGINE), 685 (W/ D239 ENGINE), 744 (W/ D239 ENGINE), 784 (W/ D246 ENGINE), 785 (W/ D246 ENGINE), 844 (W/ D268 ENGINE), 844S (W/ D268 ENGINE). 856 (W/ DT239 ENGINE), 884 (W/ D268 ENGINE), 885 (W/ D268 ENGINE)

We have free classified ads. To place one, Email the text and a photo if possible to Jeremiah@scoutparts.com or call 888-288-0550, and we will run it for free until you tell us to take it down.