This kit contains 8 pieces. Includes gaskets and felt seals to replace rear main seal.

This is an 18-piece kit with the (6) following gaskets and (2) felt seals to replace the rear main seal: (2) 25093DA Rear oil seal retainer rubber plugs (2) 46121DA Center retainer gaskets (1) 46131DB Retainer gasket (1) 46134DA Rear seal retainer plate gasket (2) 57613DA Oil seal felts These are the 10 extra gaskets (1) 46137D Rear dust seal gasket (1) 21632D Carburetor to manifold gasket (1) 45685D Governor housing front gasket (1) 45981D Water pump base gasket (1) 46181DB Inner timing gear cover (1) 46182DA Outer timing cover gasket (2) 46186D Distributor / Magneto drive housing gaskets (1) 46700D Crankcase breather tube gasket (1) 64155D Oil seal felts BMD Following British built gas/dsl M Gas or LP Super M Gas or LP MTA Gas or LP Super MTA Gas or LP MV Gas or LP Super MV Gas or LP O6 Gas or LP OS6 Gas or LP T6 Gas or LP Super W6 Gas or LP Super W6TA Gas or LP W6 Gas or LP 400 Gas or LP W400 Gas or LP 450 Gas or LP B-450 Following British built gas/dsl W450

Specifications 13 piece kit includes: (2) 24425D, 24425DA felt seals (2) 43447D, 43447DA seal retainer center gaskets (1) 43448D seal retainer to block gasket (4) 43445D seal plate felt plugs (4) 43446D, 43446DA seal retainer plate gaskets A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C O12 2-piece rear felt seal ONLY fits as a rear crankshaft seal O14 2-piece rear felt seal ONLY fits as a rear crankshaft seal T340 gas, up to engine SN: 100500 T5 gas, up to engine SN: 100500 W12 2-piece rear felt seal ONLY fits as a rear crankshaft seal W14 2-piece rear felt seal ONLY fits as a rear crankshaft seal F12 2-piece rear felt seal ONLY fits as a rear crankshaft seal F14 2-piece rear felt seal ONLY fits as a rear crankshaft seal 100 130 140 200 230 240 330 340

Specifications 4.568" outside diameter (OD) 4.000" inside diameter (ID) 0.375" wide Set includes:1 pc. lip seal, rear seal housing gasket and 2 plugs. Hydro 70 gas, LP Hydro 86 gas, LP 340 diesel (no German diesels) 454 gas, LP 460 gas, LP, diesel (no German diesels) 464 gas, LP 504 diesel (no German diesels) 544 gas, LP 560 gas, LP, diesel (no German diesels) 574 gas, LP 606 gas, LP, diesel (no German diesels) 656 gas, LP, diesel (no German diesels) 660 gas, LP, diesel (no German diesels) 666 gas, LP 674 gas, LP 686 gas, LP 706 gas, LP, diesel (no German diesels) 756 gas, LP 806 gas, LP 826 gas, LP 856

Specifications 9 piece set For 4 Cylinder Diesel Engines Retainer gasket: 46240DA, 46240DB Retainer plate gasket: 51980D Rear dust seal gasket: 46137D (2) Center retainer gaskets: 259530R1, 259530R2, 271702R1 (2) Felt plugs: 25093D, 25093DA (2) Retainer felts: 46132D, 260001R1, 260001R2 Model Note Equipment Information MD Super MD Super MDV MDV Super MDV-TA MTA Super MTA ODS6 TD6 Super WD6 WD6 400 up to Engine SN: 13481 W400

This seal comes as a pair.

Made in the USA

This gasket is for the timing cover.

Specifications 4-1/4" overall length 3-3/4" overall width 3-1/4" x 2-3/4" center-to-center bolt holes 1822 with IHC built engine Cotton Picker 1066 1086 1466 1486 1566 1586 3588 3788 4100 4156 4166 4186 4366 5088 5288 5488 6388 6588 6788

Specifications Rubberized Cork 20-1/2" Outside length 19-1/4" Inside length 6.00" Outside width 5.00" Inside width 1/8" Thick T20 F20 Regular

454 with C157, (C175 1973 and up) and C200 gas or LP engine 464 with C157, (C175 1973 and up) and C200 gas or LP engine 544 with C157, (C175 1973 and up) and C200 gas or LP engine 574 with C157, (C175 1973 and up) and C200 gas or LP engine 674

O12 O14 W12 W14 F12 F14

I9 Gas, LP Super W9 Gas, LP W9 Gas, LP WR9 Gas, LP WR9S Gas, LP 600 Gas, LP 650

Specifications Sold individually 2 to 3 used per engine 12" Long 6-1/8" Wide 1/8" Thick Cork Rubber 770 all gas, diesel 870 all gas, diesel 970 all gas, diesel 1070 all gas, diesel 1090 all gas, diesel 1170 all gas, diesel 1175 all gas, diesel 1270 all gas, diesel 1370 all gas, diesel 2470 all gas, diesel 2670

This valve cover gasket fits the 460 Diesel and 560 Diesel tractors. It does not fit the gas engined 460 and 560. Made in the USA

The valve cover gasket fits the gas tractors, not the diesel tractors.

Other Application Info Fits International Tractors: B250, B275, B276, B414, 364, 374, 434, 2300; Engines: BC-144 (LP/Gas), BD-144 (Diesel), BD-154 (Diesel)

Includes all gaskets pictured.

VALVE COVER GASKET --- Fits Farmall: H, SUPER H, W4, OS4, 300, 350.

Other Application Info Fits International engines: D206, D239 Fits: Hydro 84 544 574 584 664 674 684 784 785 884

VALVE COVER GASKET -International Farmall FOLLOWING GAS/LP: M, MV SUPER M, SUPER MV, MTA, I6, 06, 0S6, T6, W6, W6TA, 400, 450, W400, W450 - Replacement Part #: 45952DC

This valve cover gasket is for the following diesel tractors; MD, SMD, 400, 450.

Valve Cover Gasket For Farmall: 460, 560, 606, 656, 660, 706. Diesel Tractors With The Following Engines: D236, D282, D301, and D282. Replaces IH#: 278308r3

VALVE GRIND GASKET KIT --- INCLUDES ALL GASKETS REQUIRED WHEN REPLACING THE CYLINDER HEAD. --- International Applications: CUB, Cub Lo-Boy 154.

Other Application Info Fits the following diesel engines: D206, D239, DT239, D246, D268, DT268 574 584 674 684 784 785 884

Specifications Fits Diesel Engines Only Copper jacketed on one side only B-250 with BD144, BD154 diesel engine B-275 with BD144, BD154 diesel engine B-276 with BD144, BD154 diesel engine B-414 with BD144, BD154 diesel engine 354 with BD144, BD154 diesel engine 384 with BD144, BD154 diesel engine 424 with BD144, BD154 diesel engine 444

Other Application Info Replacement numbers: Gasket set: 398177R91, 398177R92, 398177R93, 398177R94, 398177R95, 398177R96 Carburetor mounting gasket: 31336D Thermostat housing gaskets: 397966R1, 397968R1, 397971R1 Head gasket: 398066R3 Valve cover gasket: 398068R2 Intake / exhaust manifold gasket: 530682R1 (3) Valve cover grommets: 164420R1 Valve stem seals: 535166R1, 866834R1 454 with C157, (C175 1973 and up) and C200 gas or LP engines 464 with C157, (C175 1973 and up) and C200 gas or LP engines 544 with C157, (C175 1973 and up) and C200 gas or LP engines 574 with C157, (C175 1973 and up) and C200 gas or LP engines 674

This triangle gasket goes on the fan bracket/water outlet housing and it will also work on the thermostat housing of those tractors that have a water pump and thermostat.