This rotor also fits other IH tractors with a C175, C200, C157, C201 engine with Prestolite distributor.

ROTOR BUTTON --- WILL NOT FIT DELCO & PRESTOLITE DISTRIBUTORS --- International Applications: A, AV, AV1, SUPER A, SUPER AV1, B, BN, C, SUPER C, CUB, CUB LOBOY, H, HV, SUPER H, SUPER HV, M, MV, MD, MDV, SUPER M, SUPER MD, MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230 --- Replacement Part #: 353896R91

Rotor, services Fairbank Morse: FM-J4, JV4, XV4 magnetos.

RUBBER GASKET (FOR HEADLIGHT) --- MODERN VERSION OF FP 25818 --- BLACK RUBBER --- THIS GASKET IS ONE CONTINUOUS PIECE (NO STAPLES), THEREFORE IT WILL SEAL BETTER THAN THE ORIGINAL STYLE. --- Farmall : CUB, A, B, BN, C, H, M, I4, I6, ID6, I9, ID9, O4, O6, W4, W6, WD6, W6TA, W6TA, WD6TA, W9, WD9, WR9, WDR9.

Specifications 5.250" outside diameter 3.675" inside diameter 2.430" wide 3 outer tabs and 4 inner tabs to secure to the sealed beam This light bezel will also fit most Hobbs lights without glare guard. Hydro 186 Hydro 84 384 484 584 684 784 786 884 886 986 1086 1486 1586 3088 3288 3488 3588 3688 3788 4186 5088 5288 5488 6388 6588 6788

This will water proof your switch. Made of rubber and has a brass threaded ring that screws onto your existing switch. Has a lot of stretch so will fit on most any toggle switch.

For use only with agricultrual and off-road vehicles Copper wire core Not for use with electronic ignition systems

This is great stuff. Protect your wiring. It fuses permanently upon contact with itself.

SPARK PLUG --- 18 MM THREAD DIAMETER --- 1/2" REACH --- 7/8" HEX --- MEDIUM HOT --- STD. TIP/RESISTOR --- PLUG GAP .025 --- International Applications: 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 3616, HYDRO 70, HYDRO 86, T4, T5, T340;

These are the correct spark plugs for Farmall letter series tractors. IH INDUSTRIAL/CONSTRUCTION: 2404, 2504, 2606, 2706, Farmall A, AV, AV1, A1, H, HV, M, MD, SUPER C, 200, 230, 240, 300, 330, 340, 350.

The Farmall Cub requires 4 of these spark plugs for the 4 cylinder C-60 engine & Palmer M60. Tip: gap your plugs to .025 inches for proper tune up specifications.

Spark Plug Wire Grommet For Farmall: Cub, Cub Lo Boy 154, 184, and 185. This Grommet can also be used as a Sheet Metal Grommet for Battery Cables and Ignition Wires on Cub Lo Boy 154 and Cub Lo Boy 185. Replaces IH PN#: 127979, 37635R91.

SPARK PLUG WIRE SET Fits International Farmall F12, F14, I12, O12, O14, W12, W14 ORIGINAL STYLE WITH COTTON BRAID WIRE & RING TERMINALS --- PREASSEMBLED --- MADE IN USA

SPARK PLUG WIRE SET Fits Farmall A, SUPER A, B, SUPER C, CUB, H, SUPER H, M, MD, SUPER M, SUPER MD, W4, W6, W400, W450, O4, O6, OS6, ODS6, I4, I6, T6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504. FITS MODELS LISTED AND OTHER MODELS. COPPER CORE WIRES, NO CUTTING. MADE IN USA

Specifications Fits 4-cylinder models. Premium united packard wire. Graphite carbon core with waterproof silicone outer jacket. Highest quality on the market. Note: Use with electronic ignitions. A Using 90 Degree Plug Boots I4 Using 90 Degree Plug Boots AV Using 90 Degree Plug Boots Super A Using 90 Degree Plug Boots Super A-1 Using 90 Degree Plug Boots Super AV Using 90 Degree Plug Boots Super AV-1 Using 90 Degree Plug Boots B Using 90 Degree Plug Boots BN Using 90 Degree Plug Boots C Using 90 Degree Plug Boots Super C Using 90 Degree Plug Boots Cub Using 90 Degree Plug Boots Cub Loboy Using 90 Degree Plug Boots 154 Using 90 Degree Plug Boots 184 Using 90 Degree Plug Boots 185 Using 90 Degree Plug Boots H Using 90 Degree Plug Boots HV Using 90 Degree Plug Boots Super H Using 90 Degree Plug Boots Super HV Using 90 Degree Plug Boots M Using 90 Degree Plug Boots MD Using 90 Degree Plug Boots Super M Using 90 Degree Plug Boots Super MD Using 90 Degree Plug Boots Super MDV Using 90 Degree Plug Boots MDV Using 90 Degree Plug Boots Super MDV-TA Using 90 Degree Plug Boots MTA Using 90 Degree Plug Boots Super MTA Using 90 Degree Plug Boots MV Using 90 Degree Plug Boots Super MV Using 90 Degree Plug Boots Super MVTA Using 90 Degree Plug Boots O4 Using 90 Degree Plug Boots O6 Using 90 Degree Plug Boots ODS6 Using 90 Degree Plug Boots OS4 Using 90 Degree Plug Boots OS6 Using 90 Degree Plug Boots T340 Using 90 Degree Plug Boots Crawler T5 Using 90 Degree Plug Boots Crawler T6 Using 90 Degree Plug Boots Crawler TD6 Using 90 Degree Plug Boots Crawler Super W4 Using 90 Degree Plug Boots W4 Using 90 Degree Plug Boots Super W6 Using 90 Degree Plug Boots Super W6TA Using 90 Degree Plug Boots W6 Using 90 Degree Plug Boots W6TA Using 90 Degree Plug Boots Super WD6 Using 90 Degree Plug Boots WD6 Using 90 Degree Plug Boots 100 Using 90 Degree Plug Boots 130 Using 90 Degree Plug Boots 140 Using 90 Degree Plug Boots 200 Using 90 Degree Plug Boots 230 Using 90 Degree Plug Boots 240 Using 90 Degree Plug Boots 300 Using 90 Degree Plug Boots 330 Using 90 Degree Plug Boots 340 Using 90 Degree Plug Boots 350 Using 90 Degree Plug Boots 400 Using 90 Degree Plug Boots W400 Using 90 Degree Plug Boots Wheatland 404 Using 90 Degree Plug Boots 424 Using 90 Degree Plug Boots 444 Using 90 Degree Plug Boots 450 Using 90 Degree Plug Boots W450 Using 90 Degree Plug Boots Wheatland 504 Using 90 Degree Plug Boots

Specifications Fits 6-cylinder models. Premium united packard wire. Graphite carbon core with waterproof silicone outer jacket. Highest quality on the market. Note: Use with electronic ignitions. Hydro 70 Hydro 86 460 560 606 656 660 666 686 706 756 766 806 826 856

Spark Plug wiring Set for 6-cylinder models. With 90 Degree Boots (carbon core) NOTE: You need to cut to fit. Universal 6 cylinder tractor with 90 degree boots.

Specifications Fits 6-cylinder models w/ 90 degree Boots Premium united packard wire Graphite carbon core with waterproof silicone outer jacket Highest quality on the market Cut to length Dimensions: 2 wires - 18" long 2 wires - 28" long 2 wires - 37" long 1 Coil Wire - 22" long W40 Hydro 70 Hydro 86 460 560 606 656 660 666 686 706 756 766 806 826 856

Fits 6-cylinder models w/ Straight Boots Premium United Packard wire Graphite carbon core with waterproof silicone outer jacket Highest quality on the market Cut to length Dimensions: 2 wires - 18" long 2 wires - 28" long 2 wires - 37" long 1 Coil Wire - 22" long

Specifications Fits 6-cylinder models w/ straight boots, . Premium united packard wire. Graphite carbon core with waterproof silicone outer jacket. Cut to length. Highest quality on the market. 2 wires - 10", 2 wires - 16", 2 wires - 19 1/2", 1 - 23" coil wire. Note: Use with electronic ignitions. Hydro 70 Hydro 86 460 560 606 656 660 666 686 706 756 766 806 826 856

SPARK PLUG WIRING SET, 4 CYL --- HAS STRAIGHT BOOTS --- COPPER WIRES, WATERPROOF NEOPRENE --- International Applications: 404, 504, 3514 & OTHER MODELS USING STRAIGHT BOOTS

SPARK PLUG WIRING SET, 4 CYL Fits International Farmall 404, 504, 3514 & OTHER MODELS USING STRAIGHT BOOTS Dimensions & Notes: HAS STRAIGHT BOOTS --- COPPER WIRES, WATERPROOF NEOPRENE

Brand New Cub STARTERS IH These starters are very close to the original, carries a one year warranty, and are a direct bolt-in replacement! IH Model Cub Lo-Boy, 6 volts, 1947-1964 Mfr #'s 1109611, 1109603 International Cub Lo-Boy, 6 volt, 1947-1964 Manufacture numbers 1109611, 1109603.

Farmall starter drive 2424(Gas), 2444(Gas), 424(Gas), 444(Gas)

This is an ignition switch. It has four positions, accessory, off, run, start. It has four posts on the back; accessory, battery, ignition, and starter. You will have to do your own wiring, but they work great.

push button starter switch 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186

Starter switch for H, M, Super H, Super M. For use with 6 or 12 volt.

Push button starter switch.

push button starter switch

Kit replaces the base mount manual starter switch, push button ignition kill switch, cable from battery to switch, cable from starter to switch, and grounding strap. Hard starting, weak cranking, or faulty starting circuits can all be alleviated by this kit. Many electric starting motors are in good condition but inoperative due to weak starting circuit current.

Steel braided battery ground strap - 9" long. For Farmall Cub and other tractors.

Great switch for lighting or anything that draws a lot of juice. This switch has 4 poles. Two separate incoming and two separate outgoing. Very Heavy duty switch. 20 amp 125 volt, two position On-Off.

Triple sealed On- off switch. Completely water proof. Even the toggle has a rubber flexible screw on cover. Perfect for a tracor that has to be kept out in the weather. Very heavey duty. 12Volt 20 amps with two poles. On - off. 6 volt 30 amp.

LIGHT SWITCH KNOB - International Cub, Cub Lo-Boy, Super A, AV, C, Super C, H, HV, Super H, M, MD, Super M, MTA, WR9S, Super W6, Super WD9, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650 REPLACEMENT KNOB FOR SWITCHES WITH 15/32" SHAFTFITS CUB, LO-BOY, SUPER A, AV, C, SUPER C, H, HV, SUPER H, M, MD, SUPER M, MTA, WR9S, SUPER W 6, SUPER SD9, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650

This switch is ON-OFF-ON 12 volt 15 Amp. Medium duty for most anything you would want to switch.

Dimensions & Notes: INCLUDES 12-VOLT BULB & MOUNTING BOLTS --- PAINTED BLACK --- SOLID BUCKET IH 370306R91, 370716R91, 371368R91, 376850R91

This is an electrical ignition part. it goes inside your distributor and your points mount on to it.

Light Terminal International Cub, A, Super A, AV, Super AV, B, BN, C, Super C, H, Super H, HV, Super HV, M, Super M, MD, MV, MDV, MTA, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 450, W4, W6, W9

Medium duty switch, easy to use and hook up. Great way to turn on or off a electrical device. ON-OFF two position switch 12 volt 15 amp.

Fits International 300 1/55 - 12/56, 350 Gas 1/56 - 12/58 Replaces OEM number 364372R91, 364374R92