J4 magneto gasket kit for Farmall Cub tractors. Complete gasket kit for your J4 magneto.

Made with Zinc Like the Original!

Note: ROPS means rollover protective structure. Direct OEM replacement (3) 3 Watt LED's, 20 Cree LED 7-3/4" length 2" overall height 7" center-to-center mounting holes 1-1/2" deep Theoretical lumens: 7000 Amp draw: 0.75 9 Watts Voltage: 10-30 Volt operating range Negative ground systems (black wire is the ground) ABS housing IP67 waterproof and shock proof rated Lens: scratch resistant polycarbonate amber lens Rated @ 50000 hours lifetime Operating temperature is -40 to 140 degrees Fahrenheit No bulbs or ballast to replace Provides additional light without overloading your existing electrical system Energy efficient for longer battery and alternator life LED's provide a brighter, whiter light to enhance visibility and safety More durable than a standard or halogen bulb style light 9110 9130 9150 9170 9180 9210 9230 9240 9250 9260 9270 9280 9310 9330 9350 9370 9380 9390

Specifications Rectangle Plastic amber lens (2) 5-3/4" center-to-center mounting holes 2" wide 3-1/8" tall 6-3/4" overall length 12 to 24 Volts 2 wires Black wire is ground Red wire is power Hydro 186 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor Hydro 84 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 484 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 584 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 684 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 784 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 786 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 884 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 886 SN: 13588 and up Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 986 SN: 17756 and up Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 1086 SN: 30839 and up Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 1486 SN: 17123 and up Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 1586 SN: 15696 and up Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 3088 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 3288 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 3488 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 3588 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 3688 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 3788 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 5088 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 5288 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 5488 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 6388 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 6588 Internationals with factory IH Canopy, Cab or Rops; 4 used per tractor 6788

Specifications Direct OEM replacement 39 LED's 4-1/2" x 4-1/2" Voltage: 10-30 Volt operating range Metal housing with stainless steel mounting hardware Lens: scratch resistant polycarbonate Amber/Amber lens IP67 waterproof and shock proof rated Rated @ 50000 hours lifetime Operating temperature is -40 to 140 degrees Farenheit No bulbs or ballast to replace Provides additional light without overloading your existing electrical system. Energy efficient for longer battery and alternator life LED's provide a brighter, whiter light to enhance visibility and safety. More durable than a standard or halogen bulb style light 766 966 1066 1466 1468 1566 1568

Specifications 60 degree flood beam pattern 6.000" overall length 3.500" tall 3.000" deep LED type: 8 Cree, 5 watt LED Power: 40 watts total Voltage: 10-30 Volt operating range Amp draw: 3.3A @ 12V Theoretical lumens: 3600 Operating lumens: 1200 Color temperature: 6000K Body material: black painted heavy duty die cast aluminum housing with integral heat sink Lens: scratch resistant polycarbonate IP67 waterproof and shock proof rated Operating temperature is -40 to 140 degrees Fahrenheit Includes electrical connector and stainless steel mounting hardware Side swivel mount Natural white color light Rated at 50000 hours lifetime No bulbs or ballast to replace Replaces the existing halogen lamp Provides additional light without overloading your existing electrical system Energy efficient for longer battery and alternator life LED's provide a brighter, whiter light to enhance visibility and safety. More durable than a standard or halogen bulb style light The flood beam is an excellent work light that illuminates wide and short areas. 5120 1 used on the left rear fender Maxxum 5130 1 used on the left rear fender Maxxum 5140 1 used on the left rear fender Maxxum 5220 1 used on the left rear fender Maxxum 5230 1 used on the left rear fender Maxxum 5240 1 used on the left rear fender Maxxum 5250 1 used on the left rear fender Maxxum 7110 1 to 2 used Magnum 7120 1 to 2 used Magnum 7130 1 to 2 used Magnum 7140 1 to 2 used Magnum 7150 1 to 2 used Magnum 7210 1 to 2 used Magnum 7220 1 to 2 used Magnum 7230 1 to 2 used Magnum 7240 1 to 2 used Magnum 7250 1 to 2 used Magnum 8910 1 to 2 used Magnum 8920 1 to 2 used Magnum 8930 1 to 2 used Magnum 8940 1 to 2 used Magnum 8950 1 to 2 used Magnum MX100 2 used Maxxum MX100C 2 used Maxxum MX110 2 used Maxxum MX110C 2 used Maxxum MX120 2 used Maxxum MX135 2 used Maxxum MX150 2 used Maxxum MX170 2 used Maxxum MX215 1 to 2 used Magnum MX245 1 to 2 used Magnum MX275 1 to 2 used Magnum MX305 1 to 2 used Magnum MX80C 2 used Maxxum MX90C

Specifications 60 degree flood beam pattern 6.000" overall length 3.500" tall 3.000" deep LED type: 8 Cree, 5 Watt LED Power: 40 Watts total Voltage: 10-30 Volt operating range Amp draw: 3.3A @ 12V Theoretical lumens: 3600 Operating lumens: 1200 Color temperature: 6000K Body material: black painted heavy duty diecast aluminum housing with integral heat sink Lens: scratch resistant polycarbonate IP67 waterproof and shock proof rated Operating temperature is -40 to 140 degrees Farenheit Includes electrical connector and stainless steel mounting hardware Bottom swivel mount Natural white color light Rated at 50000 hours lifetime No bulbs or ballast to replace Replaces the existing halogen lamp Provides additional light without overlooking your existing electrical system Energy efficient for longer battery and alternator life LED's provide a brighter, whiter light to enhance visibility and safety More durable than a standard or halogen bulb style light The flood beam is an excellent work light that illuminates wide and short areas. 180 2 used Magnums 190 2 used Magnums 210 2 used Magnums 215 2 used Magnums 225 2 used Magnums 235 2 used Magnums 245 2 used Magnums 250 2 used Magnums 255 2 used Magnums 260 2 used Magnums 275 2 used Magnums 280 2 used Magnums 280 6 used Steigers 290 2 used Magnums 305 2 used Magnums 310 2 used Magnums 315 2 used Magnums 330 6 used Steigers 335 2 used Magnums 335 6 used Steigers 340 2 used Magnums 350 4 used Steigers 370 4 used Steigers 380 2 used Magnums 380 6 used Steigers 385 6 used Steigers 400 4 used Steigers 420 4 used Steigers 430 6 used Steigers 435 6 used Steigers 450 4 used Steigers 470 4 used Steigers 480 6 used Steigers 485 4 used Steigers 485 6 used Steigers 500 4 used Steigers 530 6 used Steigers 535 6 used Steigers 540 4 used Steigers 550 4 used Steigers 580 4 used Steigers 600 4 used Steigers 620 4 used Steigers 3520 4 used Titan Floaters 4020 4 used Titan Floaters 4520 4 used Titan Floaters 5120 2 used Maxxums 5130 2 used Maxxums 5140 2 used Maxxums 5220 2 used Maxxums 5230 2 used Maxxums 5240 2 used Maxxums 5250 2 used Maxxums 7110 2 used Magnums 7120 2 used Magnums 7130 2 used Magnums 7140 2 used Magnums 7150 2 used Magnums 7210 2 used Magnums 7220 2 used Magnums 7230 2 used Magnums 7240 2 used Magnums 7250 2 used Magnums 8910 2 used Magnums 8920 2 used Magnums 8930 2 used Magnums 8940 2 used Magnums 8950 2 used Magnums 9110 4 used Steigers 9130 4 used Steigers 9150 4 used Steigers 9170 4 used Steigers 9180 4 used Steigers 9210 4 used Steigers 9230 4 used Steigers 9250 4 used Steigers 9270 4 used Steigers 9280 4 used Steigers CX100 2 used CX50 2 used CX70 2 used CX80 2 used CX90 2 used FLX3010 4 used Titan Floaters FLX3510 4 used Titan Floaters FLX4010 4 used Titan Floaters FLX4510 4 used Titan Floaters MX100 2 used MX100C 2 used MX110 2 used MX120 2 used MX135 2 used MX150 2 used MX170 2 used MX180 2 used MX200 2 used MX210 2 used MX215 2 used MX220 2 used MX230 2 used MX240 2 used MX245 2 used MX255 2 used MX270 2 used MX275 2 used MX285 2 used MX305 2 used MX80C 2 used MX90C 2 used STX275 6 used Steigers STX280 6 used Steigers STX325 6 used Steigers STX330 6 used Steigers STX335 6 used Steigers STX375 6 used Steigers STX380 6 used Steigers STX385 6 used Steigers STX425 6 used Steigers STX430 6 used Steigers STX435 6 used Steigers STX440 6 used Steigers STX450 6 used Steigers STX480 6 used Steigers STX500 6 used Steigers STX530

Specifications Hi-low beam pattern Direct OEM replacement LED lamp: 5 watt, 18 Cree LED 10" length 5" overall height Theoretical lumens: 7000 Power: 100 watts Amp draw: 8.2 Voltage: 10-30 Volt operating range Color temperature: 6000K Die cast aluminum housing with integral heat sink Lens: scratch resistant polycarbonate IP67 waterproof and shock proof rated Rated @ 50000 hours lifetime Operating temperature is -40 to 140 degree Farenheit Natural white color light No bulbs or ballast to replace Replaces the existing halogen light Provides additional light without overloading your existing electrical system. Energy efficient for longer battery and alternator life LED's provde a brighter, whiter light to enhance visibility. More durable than a standard or halogen bulb style light 7110 Magnums 7120 Magnums 7130 Magnums 7140 Magnums 7150 Magnums 7210 Magnums 7220 Magnums 7230 Magnums 7240 Magnums 7250 Magnums 8910 Magnums 8920 Magnums 8930 Magnums 8940 Magnums 8950

Specifications Direct OEM Replacement Flood/Spot combo Dimensions: 4" x 6" LED Type: 5 Watt 12 Cree Led Power: 60 watts total Voltage: 10-30 Volt Operating Range 4800 Raw Lumens Color Temperature: 6000K Black painted Heavy Die Cast Aluminum Housing with Integral Heat Sink Lens: Scratch Resistant Polycarbonate IP67 Waterproof and Shock Proof Rated Stainless Steel Mounting Bracket for John Deere Applications Includes the H4 Connector and Hardware Rated @ 50000 Hours Lifetime Operating Temperature is -40 to 140 Degrees Farenheit No Bulbs or Ballast to Replace Replaces the Existing Halogen Lamp Provides Additional Light without Overloading Your Existing Electrical System Energy Efficient for Longer Battery and Alternator Life LED's Provide a Brighter, Whiter Light to Enhance Visibility and are More Durable Than a Standard or Halogen Bulb Style Light The Flood Beam is an Excellent Work Light that Illuminates Wide and Short Areas 385 485 585 685 885

Specifications Round Plastic red lens (2) 2-1/2" center-to-center mounting holes 1-1/2" wide 4" O.D. 12 Volts 2 wires Hydro 186 2 used per tractor 786 2 used per tractor 886 SN: 13588 and up 2 used per tractor 986 SN: 17756 and up 2 used per tractor 1086 SN: 30839 and up 2 used per tractor 1486 SN: 17123 and up 2 used per tractor 1586 SN: 15696 and up 2 used per tractor 3088 2 used per tractor 3288 2 used per tractor 3488 2 used per tractor 3588 2 used per tractor 3688 2 used per tractor 3788 2 used per tractor 5088 2 used per tractor 5288 2 used per tractor 6388 2 used per tractor 6588 2 used per tractor 6788

Other Application Info For tractors, etc. when equipped with a 12 volt system. Model Note Equipment Information A when equipped with 12-Volt system I4 when equipped with 12-Volt system AV when equipped with 12-Volt system Super A when equipped with 12-Volt system Super AV when equipped with 12-Volt system B when equipped with 12-Volt system BN when equipped with 12-Volt system C when equipped with 12-Volt system Super C when equipped with 12-Volt system Cub when equipped with 12-Volt system H when equipped with 12-Volt system HV when equipped with 12-Volt system Super H when equipped with 12-Volt system Super HV when equipped with 12-Volt system I9 when equipped with 12-Volt system ID9 when equipped with 12-Volt system M when equipped with 12-Volt system MD when equipped with 12-Volt system Super M when equipped with 12-Volt system Super MD when equipped with 12-Volt system Super MDV when equipped with 12-Volt system MDV when equipped with 12-Volt system MTA when equipped with 12-Volt system MV when equipped with 12-Volt system Super MV when equipped with 12-Volt system O4 when equipped with 12-Volt system O6 when equipped with 12-Volt system OS4 when equipped with 12-Volt system OS6 when equipped with 12-Volt system T6 when equipped with 12-Volt system TD6 when equipped with 12-Volt system Super W4 when equipped with 12-Volt system W4 when equipped with 12-Volt system Super W6 when equipped with 12-Volt system W6 when equipped with 12-Volt system W6TA when equipped with 12-Volt system W9 when equipped with 12-Volt system WD6 when equipped with 12-Volt system WD9 when equipped with 12-Volt system WDR9 when equipped with 12-Volt system WR9 when equipped with 12-Volt system WR9S

LIGHTING SWITCH DIMMER RESISTOR MADE IN USA FITS SWIITCHES FOR BOTH CUTOUTS AND GENERATORS International Applications: FARMALL H, HV, SUPER H, SUPER HV, W-4, SUPER W-4, O-4, OS-4, M, SUPER M, W-6, SUPER W-6, W-6, OS-6, O-6, MV, WD-6 WITH LIGHTING ONLY, W-9, WR-9, WR-95, W-400 GAS, W-450 GAS, CUB, A, SUPER A, B, BN, C, SUPER C, 100, 130, 200, 230, 400 GAS, 450 GAS, 300 GAS Replacement Part #: 47889D (IH)

Specifications CCW Rotation (Counter Clockwise) FITS MODELS: B-275 with Lucas Distributor B-414 with Lucas Distributor 354 with Lucas Distributor 384 with Lucas Distributor 424 with Lucas Distributor B-434 with Lucas Distributor 444 with Lucas Distributor

MAGNETO CAP WILL FIT IHC F4 & H4 MAGNETOS International Applications: A, AV, AI, SUPER A, B, BN, C, SUPER C, H, SUPER H, HV, M, MV, SUPER M, 100, 130, 200, 230, 300, 350, 400, 450, MTA, MTAV, W6TA, W4, I4, I9, O4, W6, T6, T9, O6, I6, OS6, 600, 650, POWER UNITS: IU4, IU6, U2, I2A, U164, U6 Replacement Part #: IH 47413DYC

1.923" tall 0.315" wide 0.550" long 2 used per engine; sold individually

MAGNETO COIL WILL FIT IHC F4 & F6 MAGNETO International Applications: A, AV, AI, SUPER A, B, BN, C, SUPER C, H, SUPER H, HV, M, MV, SUPER M, 100, 130, 200, 230, 300, 350, 400, 450, MTA, MTAV, W6TA, W4, I4, I9, O4, W6, T6, T9, O6, I6, OS6, 600, 650, POWER UNITS: IU4, IU6, U2, I2A, U164, U6

Specifications 2.404" overall length 0.656" diameter body Learn about the Steiner Difference Our condenser has the correct dimensions and the correct thread pitch. We worked hard to get a correct condenser. Most suppliers have the wrong thread pitch (metric) or the wrong dimensions (too short and too wide). Other Application Info This condenser will fit the listed models using the following IHC magnetos: H1, H4, F4, F6. Will also fit the J4 magnetos up to serial number 81410. Model Note Equipment Information A Some I4 Some AV Some Super A Some B Some BN Some C Some Super C Some Cub Some Cub Loboy Some Cub LoBoy H Some HV Some Super H Some Super HV Some I9 Some ID9 Some M Some MD Some Super M Some Super MD Some Super MDV Some MDV Some MTA Some MV Some Super MV Some O12 Some O4 Some O6 Some ODS6 Some OS4 Some OS6 Some T20 Some T5 Some T6 Some TD6 Some W12 Some W14 Some Super W4 Some W4 Some W40 Some Super W6 Some W6 Some W6TA Some W6TA Some, Diesel W9 Some WD6 Some Super WD9 Some Super WDR9 Some WD9 Some WDR9 Some WR9 Some WR9S Some 10-20 Some McCormick Deering 15-30 Some McCormick Deering 22-36 Some McCormick Deering F12 Some F14 Some F20 Some Regular Some 100 Some 130 Some 200 Some 230 Some 300 Some 350 Some 400 Some W400 Some Wheatland 450 Some W450 Some Wheatland 600 Some 650

MAGNETO GASKET SET ONLY FITS MODELS WITH F4 OR H4 MAGNETO! International Applications: A, AV, AI, SUPER A, B, BN, C, SUPER C, H, SUPER H, HV, M, MV, SUPER M, 100, 130, 200, 230, 300, 350, 400, 450, MTA, MTAV, W6TA, W4, I4, I9, O4, W6, T6, T9, O6, I6, OS6, 600, 650, POWER UNITS: IU4, IU6, U2, I2A, U164, U6

This gear drives the rotor gear on a J4 magneto. The J4 magneto was used on the Farmall Cub.

Specifications Fits IHC J4 magneto Other Application Info Point Gap = 0.013" Fits IHC J4 magneto and IH 353898R1 distributors A with IH 353898R11 DISTRIBUTOR I4 with IH 353898R11 DISTRIBUTOR AV with IH 353898R11 DISTRIBUTOR Super A with IH 353898R11 DISTRIBUTOR Super AV with IH 353898R11 DISTRIBUTOR B with IH 353898R11 DISTRIBUTOR BN with IH 353898R11 DISTRIBUTOR C with IH 353898R11 DISTRIBUTOR Super C with IH 353898R11 DISTRIBUTOR Cub with J4 MAGNETO or IH 353898R11 DISTRIBUTOR Cub Loboy with J4 MAGNETO or IH 353898R11 DISTRIBUTOR Cub LoBoy 154 with IH 353898R11 DISTRIBUTOR 184 with IH 353898R11 DISTRIBUTOR 185 with IH 353898R11 DISTRIBUTOR H with IH 353898R11 DISTRIBUTOR HV with IH 353898R11 DISTRIBUTOR Super H with IH 353898R11 DISTRIBUTOR Super HV with IH 353898R11 DISTRIBUTOR I9 with IH 353898R11 DISTRIBUTOR ID9 with IH 353898R11 DISTRIBUTOR M with IH 353898R11 DISTRIBUTOR MD with IH 353898R11 DISTRIBUTOR Super M with IH 353898R11 DISTRIBUTOR Super MD with IH 353898R11 DISTRIBUTOR Super MDV with IH 353898R11 DISTRIBUTOR MDV with IH 353898R11 DISTRIBUTOR MTA with IH 353898R11 DISTRIBUTOR Super MTA with IH 353898R11 DISTRIBUTOR MV with IH 353898R11 DISTRIBUTOR Super MV with IH 353898R11 DISTRIBUTOR O4 with IH 353898R11 DISTRIBUTOR O6 with IH 353898R11 DISTRIBUTOR ODS6 with IH 353898R11 DISTRIBUTOR T6 with IH 353898R11 DISTRIBUTOR TD6 with IH 353898R11 DISTRIBUTOR Super W4 with IH 353898R11 DISTRIBUTOR W4 with IH 353898R11 DISTRIBUTOR Super W6 with IH 353898R11 DISTRIBUTOR W6 with IH 353898R11 DISTRIBUTOR W6TA with IH 353898R11 DISTRIBUTOR W9 with IH 353898R11 DISTRIBUTOR WD6 with IH 353898R11 DISTRIBUTOR WD9 with IH 353898R11 DISTRIBUTOR WDR9 with IH 353898R11 DISTRIBUTOR WR9 with IH 353898R11 DISTRIBUTOR 100 with IH 353898R11 DISTRIBUTOR 130 with IH 353898R11 DISTRIBUTOR 140 with IH 353898R11 DISTRIBUTOR 200 with IH 353898R11 DISTRIBUTOR 230 with IH 353898R11 DISTRIBUTOR 240 with IH 353898R11 DISTRIBUTOR 300 with IH 353898R11 DISTRIBUTOR 330 with IH 353898R11 DISTRIBUTOR 340 with IH 353898R11 DISTRIBUTOR 350 with IH 353898R11 DISTRIBUTOR 400 with IH 353898R11 DISTRIBUTOR 404 with IH 353898R11 DISTRIBUTOR 424 with IH 353898R11 DISTRIBUTOR 444 with IH 353898R11 DISTRIBUTOR 450 with IH 353898R11 DISTRIBUTOR 600 with IH 353898R11 DISTRIBUTOR 650

A Some, with H4 magneto I4 Some, with H4 magneto AV Some, with H4 magneto Super A Some, with H4 magneto Super A-1 Some, with H4 magneto Super AV Some, with H4 magneto Super AV-1 Some, with H4 magneto B Some, with H4 magneto BN Some, with H4 magneto C Some, with H4 magneto Super C Some, with H4 magneto H Some, with H4 magneto HV Some, with H4 magneto Super H Some, with H4 magneto Super HV Some, with H4 magneto I9 Some, with H4 magneto ID9 Some, with H4 magneto M Some, with H4 magneto MD Some, with H4 magneto Super M Some, with H4 magneto Super MD Some, with H4 magneto Super MDV Some, with H4 magneto MDV Some, with H4 magneto Super MDV-TA Some, with H4 magneto MTA Some, with H4 magneto Super MTA Diesel, Some, with H4 magneto Super MTA Some, with H4 magneto MV Some, with H4 magneto Super MV Some, with H4 magneto Super MVTA Some, with H4 magneto O4 Some, with H4 magneto O6 Some, with H4 magneto ODS6 Some, with H4 magneto OS4 Some, with H4 magneto OS6 Some, with H4 magneto T6 Some, with H4 magneto TD6 Some, with H4 magneto Super W4 Some, with H4 magneto W4 Some, with H4 magneto Super W6 Some, with H4 magneto Super W6TA Some, with H4 magneto W6 Some, with H4 magneto Super W9 Some, with H4 magneto W9 Some, with H4 magneto Super WD6 Some, with H4 magneto WD6 Some, with H4 magneto Super WD9 Some, with H4 magneto Super WDR9 Some, with H4 magneto WD9 Some, with H4 magneto WDR9 Some, with H4 magneto WR9S Some, with H4 magneto 100 Some, with H4 magneto 130 Some, with H4 magneto 200 Some, with H4 magneto 230 Some, with H4 magneto 300 Some, with H4 magneto 350 Some, with H4 magneto 400 Some, with H4 magneto W400 Some, with H4 magneto Wheatland 450 Some, with H4 magneto W450 Some, with H4 magneto Wheatland 600 Some, with H4 magneto 650 Some, with H4 magneto

Specifications Fits IHC J4 magneto Cub Cub Loboy

35 Amp 1 wire hook up Built in regulator Works with magneto or distributor ignitions 4-1/2" housing diameter 2-3/4" pulley outside diameter 1/2" belt width

This is a 55 watt Halogen H3 Bulb. Includes wire harness. Positionable with handle and switch built into the back of light. 6" diameter reflector. All mounting hardware included. You can turn this light in any direction and it will stay there all by it's self. Great light to mount on the back as a work light, or to mount on the front as a driving light that can be manually positioned. Brighter than average headlight. Dose not require a relay.

Neutral Safety Switch Case IH 595 International B414 diesel

Specifications 5/8" - 32 thread 2 spades 2.575" overall length Cub SN: 239827 and up for use as a neutral safety switch 154 for use as a neutral safety switch 185 for use as a neutral safety switch Hydro 100 for use as a neutral safety switch Hydro 186 for use as a neutral safety switch Hydro 70 for use as a neutral safety switch Hydro 84 SN: 7253 and up for use as a neutral safety switch Hydro 86 for use as a neutral safety switch 140 SN: 45001 and up for use as a neutral safety switch 21456 for use as a neutral safety switch 484 SN: 6501 and up for use as a neutral safety switch 544 for use as a neutral safety switch 574 Gas and diesel for use as a neutral safety switch 584 SN: 6953 and up for use as a neutral safety switch 656 International / Farmall; gas / diesel, Hydro for use as a neutral safety switch 664 for use as a neutral safety switch 666 for use as a neutral safety switch 684 SN: 7253 and up for use as a neutral safety switch 686 for use as a neutral safety switch 706 for use as a neutral safety switch 756 for use as a neutral safety switch 766 for use as a neutral safety switch 784 SN: 7167 and up for use as a neutral safety switch 785 SN: 12442 and up for use as a neutral safety switch 786 for use as a neutral safety switch 806 for use as a neutral safety switch 826 for use as a neutral safety switch 856 for use as a neutral safety switch 884 SN: 6643 and up for use as a neutral safety switch 886 for use as a neutral safety switch 966 for use as a neutral safety switch 986 for use as a neutral safety switch 1026 for use as a neutral safety switch 1066 for use as a neutral safety switch 1086 for use as a neutral safety switch 1206 for use as a neutral safety switch 1256 for use as a neutral safety switch 1456 for use as a neutral safety switch 1466 for use as a neutral safety switch 1468 for use as a neutral safety switch 1486 for use as a neutral safety switch 1566 for use as a neutral safety switch 1568 for use as a neutral safety switch 1586 for use as a neutral safety switch 3088 for use as a neutral safety switch 3288 for use as a neutral safety switch 3488 for use as a neutral safety switch 3588 for use as a neutral safety switch 3688 for use as a neutral safety switch 3788 for use as a neutral safety switch 4100 for use as a neutral safety switch 4156 for use as a neutral safety switch 4166 for use as a neutral safety switch 5088 up to SN: 6243 for use as a neutral safety switch 5288 up to SN: 4210 for use as a neutral safety switch 5488 up to SN: 2425 for use as a neutral safety switch 6388 for use as a neutral safety switch 6588 for use as a neutral safety switch 6788

Specifications This light switch has 6 spade terminals The outside diameter thread is 0.685" Hydro 186 Hydro 84 Hydro 86 140 SN: 62472 and up with alternator 384 464 SN: 109151 and up 484 574 both SN: 104909 and up 584 674 SN: 108105 and up 684 686 784 786 884 886 986 1086 1486 1586 3088 3288 3488 3588 3688 3688 High Clearance 3788 4186 4568 5088 5288 5488 6388 6588 6788

Specifications 3.256" outside diameter (OD) 2.063" inside diameter (ID) 0.500" wide Fits as a magneto or distributor drive seal Cub Cub Loboy 154 184 185

Included: Long & short bezels Made with a durable polycarbonate lens

Made with a durable polycarbonate lens & aluminum housing IP67 waterproof rating totally protects against dust as well as 3 ft of immersion LED lights use less energy and typically last 5x longer than halogen Backed by a 1-year warranty Recommended for off-road applications Amps (@12V) 1.75 Beam Style Hi-Lo Dimensions 4.5" Installation Plug

Trapezoid beam is designed to give a more narrow pattern for longer visibility Made with a durable polycarbonate lens & aluminum housing IP67 waterproof rating totally protects against dust as well as 3 ft of immersion LED lights use less energy and typically last 5x longer than halogen Backed by a 1-year warranty Recommended for off-road applications Amps (@12V) 1.5 Beam Style Trapezoid Dimensions 4.5" Installation Plug

Trapezoid beam is designed to give a more narrow pattern for longer visibility Made with a durable polycarbonate lens & steel housing IP67 waterproof rating totally protects against dust as well as 3 ft of immersion LED lights use less energy and typically last 5x longer than halogen Backed by a 1-year warranty Recommended for off-road applications Amps (@12V) 1.5 Beam Style Trapezoid Dimensions 4.5" Lens Material Polycarbonate Location Cab Front, Cab Rear, Fender Front, Grille New/Reman New Raw Lumens 1260 Shape Round Volts 10-30V Waterproof Rating IP67 Watts 18 Diode Manufacturer CREE 1026 Fender 1066 Fender 1086 Eff. S/N 30895 1206 Fender 1256 Fender 1456 Fender 1466 Fender 1468 Fender 1486 Eff. S/N 17123 1566 Fender 1586 Fender 1588 Fender 21026 Fender 21206 Fender 21256 Fender 21456 Fender 2504 Fender 2544 Fender 2656 Fender 2706 Fender 2756 Fender 2826 Fender 2856 Fender 3088 Fender 3288 Fender 3388 Fender 3488 Fender 3588 Fender 3688 Fender 3788 Fender 4366 Fender 4386 Fender 4568 Fender 4586 Fender 4786 Fender 504 Fender 5088 Fender 5288 Fender 544 Fender 5488 Fender 6388 Fender 656 Fender 6588 Fender 664 Fender 666 Fender 6788 Fender 686 Fender 706 Fender 7288 Fender 7488 Fender 756 Fender 786 Fender 806 Fender 826 Fender 856 Fender 886 Eff. S/N 13588 966 Fender 986 Eff. S/N 17756 Hydro 100 Fender Hydro 186 Fender Hydro 70 Fender Hydro 86 Fender

Upgrading to this PAR36 LED Trapezoid Beam Bulb is quick and easy. Use the mount and the OE wiring fits directly on to the lamp spades. Change the lights on your tractor to LED- longer lasting, BRIGHTER, and runs COOLER than halogen! Trapezoid beam is designed to give a more narrow pattern for longer visibility Made with a durable polycarbonate lens & aluminum housing IP67 waterproof rating totally protects against dust as well as 3 ft of immersion LED lights use less energy and typically last 5x longer than halogen Amps (@12V) 1.5 Beam Style Trapezoid Dimensions 4.5" Installation Plug

This is the Pertronix Ignitor for the Delco 4 cyl 6 volt Pos ground. Get Delco # off distributor.

A point file, also called an ignition file, is a great addition to your toolbox. Points tend to oxidize and a point file works better than sandpaper and various other tricks.

Model Note Equipment Information 454 some with Delco distributor number 1112477, 1112489, 1112697 and screw held cap 464 some with Delco distributor number 1112477, 1112489, 1112697 and screw held cap 544 some with Delco distributor number 1112477, 1112489, 1112697 and screw held cap 574 some with Delco distributor number 1112477, 1112489, 1112697 and screw held cap 674 some with Delco distributor number 1112477, 1112489, 1112697 and screw held cap

Specifications Note: Replaces Prestolite # IBP2040L.and 1-47V Fits IBT4702 Distributor 154 with Autolite distributor with original round rotor 184 with Autolite distributor with original round rotor 185 with Autolite distributor with original round rotor 454 with Autolite distributor with original round rotor 464 with Autolite distributor with original round rotor 544 with Autolite distributor with original round rotor 574 with Autolite distributor with original round rotor 674 with Autolite distributor with original round rotor

Pre-heater Resistor 2.077" long Fits 1.00" hole B-250 B-275 B-414 354 364 384