NEWOLD STOCK PART WE PURCHASED THESE FROM A DEFUNKED FARMALL DEALER AND THE PART NUMBER HAS BEEN LOST.

NEWOLD STOCK PART WE PURCHASED THESE FROM A DEFUNKED FARMALL DEALER AND THE PART NUMBER HAS BEEN LOST.

NEWOLD STOCK PART WE PURCHASED THESE FROM A DEFUNKED FARMALL DEALER AND THE PART NUMBER HAS BEEN LOST.

Draw Bar 40" ong

We have many many Draw keys. This one is listed by part number so it is more expensive. +.0152.5inches longX1/2"diameter Also 2.75" X1/2"

Starter Drive, 11 Teeth INDUSTRIAL/CONSTRUCTION: Farmall 780, 1190, 1194, 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1490, 1494, 770, 880, 885, 990, 995, 996

This is a driven Gear

The hub you need to keep your driveline tight.

A new driveshaft pin will help take the slop out of your driveshaft.

Emblem - International Farmall Super H, Super HV, Super M, Super MTA, WR9, Super WD9, WDR9 Bright aluminum with red and black IH # 2-1/2"W x 2-3/4"H

Case-IH TRACTOR: 475 (W/ A4.212 PERKINS ENGINE)

For H, M, Super H, Super M, Super MTA, 300, 400 series, W series, O series, and I series. This video shows you how to completely rebuild the tractor's engine. You will see the engine disassembled down to the bare block and then rebuilt. 90mins.

Even though they are NOS you can't beat this price.

International Farmall M, Super M, W6, 400, 450, Gas, Gasket. GASKET SET FITS M, SUPER M, W6, 400, 450

Fits International: 1026, 1066, 1206, 1256, 1456, 1466, 1566, 4166, 4366, 4386 Dimensions & Notes: 3-3/4" I.D., 5" O.D., 36" TALL + 8" BASE --- CHROME; DOUBLE WALL LINED --- USA MADE

Casting No. 3055048R Our Factory Rebuilt Cylinder Heads come complete with seats and guides. Valves are not included. Core*: $30. * The specified core charge will be added to the price of the item. Upon return of the core the refund will be issued.

Casting No. 364586R Our Factory Rebuilt Cylinder Heads come complete with seats and guides. Valves are not included. Core*: $100. * The specified core charge will be added to the price of the item. Upon return of the core the refund will be issued.

Casting No. 164414Our Factory Rebuilt Cylinder Heads come complete with seats and guides. Valves are not included. Core*: $30. * The specified core charge will be added to the price of the item. Upon return of the core the refund will be issued.

Casting No. 8777, 8790 Our rebuilt cylinder eads come with seats and guides. Valves are not included. Core*: $100. The core charge will be added to the price of the item. Upon return of a rebuildable core, a refund will be issued.

Fits; C(w/water pump), SUPER C, and the following tractors with a C123 engine (with sn501-65000); 100, 130, 140, 200, 230, 240. If your C123 engine's serial number is 501-65000 see FP

Convenient step unit makes it easier to get in and out of your tractor. Handrail is available for additional safety. Easy to install with no holes to drill and hardware is included. Step is 14 1/2" wide and 6" deep. It mounts at a 30 degree angle to the tractor and has 9" between each step. Matches original equipment colors. This model fits on left side of IH 06, 26, 56, 66 and Hydro 100 tractors with cabs (excluding Hiniker). Can fit IH 706, 756, 806, 826, 856, 866, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566 and 1568. Hand rail is not included. Please see part number FP29660

Convenient step unit makes it easier to get in and out of your tractor. Handrail is included at this price for additional safety. Easy to install with included hardware and no holes to drill. Step is 10" wide and 6" deep. It mounts at a 30 degree angle to the tractor and has 9" between each step. Matches original equipment colors. Available for the right or left side of open station IH 06, 26, 56, 66 and Hydro 100 tractors. Can fit IH 706, 756, 806, 826, 856, 866, 966, 1026, 1066, 1206, 1256, 1456, 1566 and 1568. Hand rail is not included. Please see part number FP29660

Fits Farmall Super C, 200, 230 240. Farmalls with C123 Engine.

Filters > Air Filters Case-IH TRACTOR: 385 Case-IH TRACTOR: 484 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 485 Case-IH TRACTOR: 485XL Case-IH TRACTOR: 584 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 585 Case-IH TRACTOR: 585XL Case-IH TRACTOR: 684 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 685 (LESS AIR CONDITIONER) Case-IH TRACTOR: 685 (W/O AIR CONDITIONING) Case-IH TRACTOR: 685XL (LESS AIR CONDITIONER) Case-IH TRACTOR: 685XL (W/O AIR CONDITIONING) Case-IH TRACTOR: 784 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 785 (LESS AIR CONDITIONER) Case-IH TRACTOR: 785 (W/O AIR CONDITIONING) Case-IH TRACTOR: 785XL (LESS AIR CONDITIONER) Case-IH TRACTOR: 785XL (W/O AIR CONDITIONING) Case-IH TRACTOR: 885 (LESS AIR CONDITIONER) Case-IH TRACTOR: 885 (W/O AIR CONDITIONING) Case-IH TRACTOR: 885XL (LESS AIR CONDITIONER)

This is the McCormick-Deering decal kit.

Brand new but just like the original, International Cub under seat tool box. Mounts under your seat, painted IH red and ready to install. Pliers not included, shown for scale only.

NEW Grille Insert 4.50" Tall Fits M and Super M grill

Farmall starter drive M, SM

Farmall COTTON PICKER: 782 , 1070 (W/ 451 Diesel Engine) , 1170 (W/ 451 Diesel Engine) , 1175 (W/ 451 Diesel Engine) , 1270 (W/ 451 Diesel Engine) , 1370 , 1570 , 185 (W/ Diesel Engine) , 770 (W/ 267 Diesel Engine) , 870 (W/ 336 Diesel Engine) , 970 (W/ 401 Diesel Engine) , COTTON PICKER: 782, 1070 (W/ 451 Diesel Engine) , 1170 (W/ 451 Diesel Engine) 1175 (W/ 451 Diesel Engine), 1270 (W/ 451 Diesel Engine) 1370, 1570 185 (W/ Diesel Engine) , 770 (W/ 267 Diesel Engine) , 870 (W/ 336 Diesel Engine 970 (W/ 401 Diesel Engine)

farmall starter drive 404, 460, 504, 560, 606, 656 660, 706

Starter drive, CUB (1947-64), CUB LO-BOY (1947-64), W9 & Palmer M60.

farmall starter drive HYDRO 100, HYDRO 186, HYDRO 3488, 1026, 1066 (Gear & Hydro), 1086, 1206, 1256, 1456, 1466, 1468, 1486

For A, C, Super A, Super C, 100 series, 200 series. This video includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment and more! 50mins.

Specifications Fiberglass. Primer only. Wet sand w/ fine paper prior to painting. 154 184 185

Drawbar Fits IH CUB International Cub Dimensions: 5/8" thick, 2" wide, 28-5/16" long Made in the USA

Starter drive Weight is one pound. Ford 9N, 2N and 8N, Improved ratchet type FD Core Charge $5. 9N, 2N, 8N Improved ratchet type.

Green Collar This one is Green and is a John Deere part. but we do have a lot of red ones as well. NEW OLD STOCK

Front Emblem For Grille International A Bright aluminum International Name Plate 10"Long.