This kit includes 4 flathead pistons with rings and 4 sleeves. This kit is not returnable. Made in the USA

Specifications 1.7255" outside diameter 1.6258" inside diameter 1.390" length Sold Individually May require reaming or boring after installation. Model Note Equipment Information 1822 up to SN: 12690 Cotton Pickers Hydro 100 Hydro 186 444 Scrapers 966 986 1066 1086 1466 1486 1566 1586 3488 3588 3688 3788 4166 4186 4366 5088 5288 5488 6388 6588 6788

Piston .060 3 5/16th oversized

This fits Prestolite distributor IAY-4010 used on Palmer 60 marine engine.

Occasionally an International or Farmall tractor would end up with a Wico XB or XH magneto and this is the point set for these magnetos.

16'' x 11'' Metal Reproduction sign

temporarily out of stock.

Please check tractors dimensions closely. If you receive rims and they do not fit, we do not pay for return shipping.

Please check tractors dimensions closely. If you receive rims and they do not fit, we do not pay for return shipping.

PRE CLEANER BOWL --- MEDIUM SIZE 7" DIAMETER --- CLEAR PLASTIC --- FOR 2" TO 3" INLET --- BOWL O.D. AT TOP = 7" --- BOWL SIDE HEIGHT = 3" --- CONE I.D. AT TOP = 3 1/2" --- OVERALL HEIGHT - 4 1/8" --- International Applications: H, SUPER H, 300, 350, M, MD, SUPER M, WR9S, SUPER WD9, MTA, W6, T6, 400, 450, W400, W450, 460, 504, 544 DSL, 560, 600, 606, 650, 660, 2504, 2544 DSL, 2606, GAS POWERED COMBINES: 403, 453 HILLSIDE, 503, 615, 715 --- Replacement Part #: DONALDSON: P020227, IH: 365413R1

4 points of surface contact. 0.700" I.D.

Heavy-duty model removes carbon from ring grooves on pistons from 2-1/2" to 5" (65mm - 127mm). Special design controls depth of cut and blade alignment. Side flanges allow use on slotted pistons. Includes cutter wheel with the following sizes: 1/16", 5/64", 3/32", 1/8", 3/16".

Want to increase horsepower on your tractor (gas engine)? Use this new propane manifold. You might have to drill out your carb flange to 1/2" so it would fit your engine.

Fits International: M, MV, MDV, SUPER M, SUPER MV, SUPER MDV, W6, SUPER W6, W6TA, MTA, MD, SUPER MD, 400, W400, 450, W450, T6, I6, O6, 248, 264, 281 (GAS / DSL)

Pump, Oil with Screen

Neoprene flex hose allowing access to all cylinders. Side release valve permits multiple readings without removing tester. All-brass quick disconnect coupler to release gauge from hose. Features 2-1/2" diameter gauge with dual calibration (0-300psi/0-21 kg/cm).

Farmall 2300A, 250, 275, 276, 3434, 354, 374, 384, 414, 434, 444

Case-IH COMBINE: 1620 (SN JJC0032630->) Case-IH COMBINE: 1640 (SN JJC0034705->) Case-IH COMBINE: 1644 Case-IH COMBINE: 1660 (SN JJC0038346->) Case-IH COMBINE: 1666 Case-IH COMBINE: 1680 (SN JJC0045689->) Case-IH COMBINE: 1688 Case-IH COMBINE: 2144 Case-IH COMBINE: 2166 Case-IH COMBINE: 2188 Case-IH COMBINE: 2344 Case-IH COMBINE: 2366 Case-IH COMBINE: 2388 Case-IH COMPACT TRACTOR: C100 Case-IH INDUSTRIAL/CONSTRUCTION: W11B Case-IH INDUSTRIAL/CONSTRUCTION: W14B Case-IH INDUSTRIAL/CONSTRUCTION: W14C Case-IH INDUSTRIAL/CONSTRUCTION: 1085B Case-IH INDUSTRIAL/CONSTRUCTION: 1085C Case-IH INDUSTRIAL/CONSTRUCTION: 1086B

Radiator Cap, Farmall 100, 140, 200, 230, 300, 330, 350, 400, 450, 460, 560, 600, 650, 660

This kit includes 4 clamps and upper and lower radiator hose.

Case-IH INDUSTRIAL/CONSTRUCTION: 21256 Case-IH INDUSTRIAL/CONSTRUCTION: 21456 Case-IH INDUSTRIAL/CONSTRUCTION: 2544 Case-IH INDUSTRIAL/CONSTRUCTION: 2656 Case-IH INDUSTRIAL/CONSTRUCTION: 2706 Case-IH INDUSTRIAL/CONSTRUCTION: 2756 Case-IH INDUSTRIAL/CONSTRUCTION: 2826 Case-IH INDUSTRIAL/CONSTRUCTION: 2856 Case-IH TRACTOR: HYDRO 100 Case-IH TRACTOR: HYDRO 186 Case-IH TRACTOR: HYDRO 70 Case-IH TRACTOR: HYDRO 86 Case-IH TRACTOR: 1026 Case-IH TRACTOR: 1066 Case-IH TRACTOR: 1086 Case-IH TRACTOR: 1206 Case-IH TRACTOR: 1256 Case-IH TRACTOR: 1456 Case-IH TRACTOR: 1466 Case-IH TRACTOR: 1468

RAINCAP --- Zinc PLATED --- 3 1/2" O.D. --- International Applications: IH MODELS

Cub 7x24 rear rims with mounting loops(4). Rims are white and will accept 8.3-24 or 9.5-24 inch tires. You will need to purchase 1/2" x 2 1/2" long grade 5 carriage bolts to install these rims. Made in the USA Please check tractors dimensions closely. If you receive rims and they do not fit, we do not pay for return shipping.

Farmall A, B rear inner axle bearing.

IH COMBINE: 62 IH COMBINE: 76 IH COMBINE: 81 IH TRACTOR: A IH TRACTOR: B IH TRACTOR: BN IH TRACTOR: C IH TRACTOR: SUPER A IH POWER UNIT: U-2 (SN

This main seal is for the 12 horse used in the 128, 129, 1200 and 1250.

When changing the rear main seal on your H you will need to change out these gaskets. These are sold each, but you will need 2.

This felt seal goes in a retainer and your engine will need 2.

These are sold each and you will need two of them.

This is a 2 part seal and this price includes both parts.

This gasket is sold each. The rear main seal retainer takes 2 of these gaskets.

This gasket fits between the block and the main seal retainer gasket.

Rear oil retainer gasket.

This gasket goes on the rear main seal retainer. You will need 2 of these.

Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.655" bore size. Piston to cylinder clearance is .001 per inch of bore