Update your International or John Deere tractor from the 2 petcock oil check system to the improved dipstick. This is an aftermarket part originally manufactured in Iowa in the late 1940's. Simply remove the top petcock and screw the dipstick mount in place to complete your conversion. 4.910" overall length 3/8" NPT Mounts in place of the upper petcock

This is a International Harvester factory stationary engine. It is set up to power a belt drive. The block is in good shape. Not cracked. Turns over a small amount. Lots of seldom seen parts. This is a 4 cylinder C113 Engine. Same engine as was used on the Farmall A and Farmall Super A. tractors. Fuel tank and magneto are missing. This stationary engine was used to pump water and the block is in good shape. This factory stationary engine is being sold for parts only. It is not a returnable item.

This for the D166(Diesel)engine used in the Farmall 340D.

Overbore kit. Size increased from 3" to 3-1/8". For C-113 engine. Kit includes: sleeves, pistons, pins, rings, rod bearings and gasket set. We need to know if you want stepped head pistons or flat head pistons and the size of the rod bearings STD, .002, .010, .020, .030.

Engine overhaul kit Farmall H with head no. 8043D. Increases to 3-7/16" for C152 engine

For H, M, Super H, Super M, Super MTA, 300, 400 series, W series, O series, and I series. This video shows you how to completely rebuild the tractor's engine. You will see the engine disassembled down to the bare block and then rebuilt. 90mins.

EXHAUST ELBOW --- International Applications: Farmall504, 2504, 3514 (GAS ONLY, 153 INCH3 ) --- Replacement Part #: IH: 377947R1

EXHAUST MANIFOLD --- 2-1/2" PIPE OUTLET --- International Applications: TO FIT 460, 560, 656, 660, 606 THE HOOD EXHAUST HOLE MUST BE ENLARGED OR PURCHASE A 2-1/2" X 2" PIPE REDUCING BUSHING TO REUSE EXISTING PIPE -- 666, 686, 706, 756, 766, 806, 826, 856 GAS EXHAUST ONLY, SELF- PROPELLED COMBINES: 303, 403, 503, 615 &

Intake/exhaust manifold, includes outlet pipe, carburetor and manifold gaskets. Heavy duty replacement for gas engines. Tractors: M, Super M, 6, 400, W400, 450, W450.

International Farmall M, Super M, W6, 400, 450, Gas, Gasket. GASKET SET FITS M, SUPER M, W6, 400, 450

A, Super A, B, C, Super C, 100, 130.

0.339" stem outside diameter 1.218" head outside diameter 4.875" overall length

The Farmall Cub uses 4 of these exhaust valves.

Exhaust Valve For Farmall Super M With C264 Gas Engine.

Casting No. 3055048R Our Factory Rebuilt Cylinder Heads come complete with seats and guides. Valves are not included. Core*: $30. * The specified core charge will be added to the price of the item. Upon return of the core the refund will be issued.

Casting No. 364586R Our Factory Rebuilt Cylinder Heads come complete with seats and guides. Valves are not included. Core*: $100. The specified core charge will be added to the price of the item. Upon return of the core the refund will be issued.

Casting No. 164414Our Factory Rebuilt Cylinder Heads come complete with seats and guides. Valves are not included. Core*: $30. * The specified core charge will be added to the price of the item. Upon return of the core the refund will be issued.

Casting No. 8777, 8790 Our rebuilt cylinder eads come with seats and guides. Valves are not included. Core*: $100. The core charge will be added to the price of the item. Upon return of a rebuildable core, a refund will be issued.

Our Factory Rebuilt Cylinder Heads come complete with seats and guides. Valves are not included International 400, 450 Gas Casting No. 362174R Core Charge $50.00 IH Model 400, 450 gas Casting #362174R Core Charge $50

This also fits 1468 & 1568.

This belt is 0.438" x 42.5".

Fits; C(w/water pump), SUPER C, and the following tractors with a C123 engine (with sn501-65000); 100, 130, 140, 200, 230, 240. If your C123 engine's serial number is 501-65000 see FP

Fits Farmall H, SUPER H, 300 and 350. Is not for the 350 diesel.

1/2" X 30.125" dimensions

FAN BELT Farmall A, B, C, Super A. 34-1/4 inches.

+ 28/32 x 45-7/8 92756374

Filters > Air Filters Case-IH TRACTOR: 385 Case-IH TRACTOR: 484 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 485 Case-IH TRACTOR: 485XL Case-IH TRACTOR: 584 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 585 Case-IH TRACTOR: 585XL Case-IH TRACTOR: 684 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 685 (LESS AIR CONDITIONER) Case-IH TRACTOR: 685 (W/O AIR CONDITIONING) Case-IH TRACTOR: 685XL (LESS AIR CONDITIONER) Case-IH TRACTOR: 685XL (W/O AIR CONDITIONING) Case-IH TRACTOR: 784 (RETAINED BY WIRE NUT) Case-IH TRACTOR: 785 (LESS AIR CONDITIONER) Case-IH TRACTOR: 785 (W/O AIR CONDITIONING) Case-IH TRACTOR: 785XL (LESS AIR CONDITIONER) Case-IH TRACTOR: 785XL (W/O AIR CONDITIONING) Case-IH TRACTOR: 885 (LESS AIR CONDITIONER) Case-IH TRACTOR: 885 (W/O AIR CONDITIONING) Case-IH TRACTOR: 885XL (LESS AIR CONDITIONER)

"All Others Will Be Plowed Under"

Case-IH COTTON PICKER: 1822 Case-IH COTTON PICKER: 1844 Case-IH COTTON PICKER: 2022 Case-IH COTTON PICKER: 2044 Case-IH COTTON PICKER: 782 Front Axle/Steering Parts > Front Axle Related Parts Case-IH INDUSTRIAL/CONSTRUCTION: 2656 Case-IH INDUSTRIAL/CONSTRUCTION: 2706 Case-IH INDUSTRIAL/CONSTRUCTION: 2756 Case-IH INDUSTRIAL/CONSTRUCTION: 2826 Case-IH INDUSTRIAL/CONSTRUCTION: 2856 Case-IH TRACTOR: HYDRO 100 Case-IH TRACTOR: HYDRO 186 Case-IH TRACTOR: HYDRO 3488 Case-IH TRACTOR: HYDRO 70 Case-IH TRACTOR: HYDRO 86 Case-IH TRACTOR: 1026 Case-IH TRACTOR: 1066 Case-IH TRACTOR: 1086 Case-IH TRACTOR: 1206 Case-IH TRACTOR: 1256

Case-IH INDUSTRIAL/CONSTRUCTION: 2400A Case-IH INDUSTRIAL/CONSTRUCTION: 2500A Case-IH INDUSTRIAL/CONSTRUCTION: 380B Case-IH TRACTOR: 385 Case-IH TRACTOR: 395 Case-IH TRACTOR: 454 Case-IH TRACTOR: 484 Case-IH TRACTOR: 485 Case-IH TRACTOR: 495 Case-IH TRACTOR: 574 Case-IH TRACTOR: 584 Case-IH TRACTOR: 585 Case-IH TRACTOR: 595 Case-IH TRACTOR: 595XL Case-IH TRACTOR: 674 Case-IH TRACTOR: 685 Case-IH TRACTOR: 685XL Case-IH TRACTOR: 695 Case-IH TRACTOR: 695XL Case-IH TRACTOR: 784

Farmall H oil filter for serial number 121022 and later. To make sure you get the correct filter, be sure to check the filter length. Short is 5-5/8", long is 7-9/16".

IH TRACTOR: H (SN ) IH TRACTOR: HV (SN- ) IH TRACTOR: OS4 (SN

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Farmall M

Our complete valve kit fots the 248 CI inline 4 motor used in Farmall M tractors. Includes the following: 4 X 248 CI GAS Intake Valve Seat 4 X 248 CI GAS Exhaust Valve Seat 4 X 248 CI GAS Intake Valve 4 X 248 CI GAS Exhaust Valve 16 X 248 CI GAS Valve Keeper 8 X 248 CI GAS Valve Stem Seal 8 X 248 CI GAS Valve Guide 4 X 248 CI GAS Valve Spring 4 X 248 CI GAS Valve Spring

This kit includes 4 flathead pistons with rings and 4 sleeves. This kit is not returnable. Made in the USA

Fits: [ C, Super A, Super A-1, Super AV, Super AV-1, Super C, T4, U2, U2A, 100, 130, 140, 200, 230, 240 ('some'; with C-113 engine SN: 310300 and up or C-123 engine SN: 35830 and up; with block casting #'s 354898R1, 354898R2, 356318R2, 356318R3, 364111R2, 366825R1 and others using 3.43" lower sleeve seal O.D.) ]; Replaces: 374493R91, 374493R92, 374493R93, PK159

Farmall starter drive M, SM