If the pinion shaft isn't stamped 528707R93 or the pinion shaft bearing surface doesn't measure 2.596", order complete Ring Gear & Pinion Kit 1026 1066 Diesel 1086 1206 1256 1456 1466 Diesel 1468 Diesel 1486 3088 3288 3388 3588 3688 706 756 766 786 806 826 856 886 966 Diesel 986 Hydro 100 Hydro 186

.002" size rod bearings for F12 and F14; A, B, C, Super A, 100, 130, Super C, 140, 200, 230, 240 with C113 or C123 engines. You will need to order one to complete your overhaul. Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

.002" size rod bearings for Cub and Cub Lo-Boy with C-60 engine & Palmer M60. Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Over sized bearings are listed for slightly worn or crankshafts that have been ground.

.002" size rod bearings for H with ser. no. 391357 or earlier, W4 Gas. Quantity to order to complete overhaul: 1 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

RUBBER GEAR SHIFT LEVER BOOT --- ALL MODELS LISTED WITH GEAR DRIVE TRANSMISSION --- International Applications: 544, 656, 664, 666, 686, 2544, 2656 --- Replacement Part #: 388182R1

Specifications 1.750" I.D., 2.690" O.D., .315" wide Model Note Equipment Information 300 Seal for Front Hollow Independent PTO Drive Gear/Shaft 330 Seal for Front Hollow Independent PTO Drive Gear/Shaft 340 Seal for Front Hollow Independent PTO Drive Gear/Shaft 350 Seal for Front Hollow Independent PTO Drive Gear/Shaft 460 Seal for Front Hollow Independent PTO Drive Gear/Shaft 504 Seal for Front Hollow Independent PTO Drive Gear/Shaft 544 Seal for Front Hollow Independent PTO Drive Gear/Shaft 606 Seal for Front Hollow Independent PTO Drive Gear/Shaft 656 Seal for Front Hollow Independent PTO Drive Gear/Shaft 666 Seal for Front Hollow Independent PTO Drive Gear/Shaft 686 Seal for Front Hollow Independent PTO Drive Gear/Shaft

.010" size rod bearings for 240, 454, 464, 484, 485 Diesel with D179 engine, Right Hand Tabs. Quantity to order to complete overhaul: 3 Also for 250, 260, 544, 574, 584, 784, 785, 884, 885 Diesel with D206, D239, D246, D268 engines, Right Hand Tabs. Quantity to order to complete overhaul: 4 Also for Hydro 70, 686, 756, 786, 826, 886, 3088 with D310, D358 engine. Right hand tabs.Quantity to order to complete overhaul: 6 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

.030" size rod bearings for 240, 454, 464, 484, 485 Diesel with D179 engine, Right Hand Tabs. Quantity to order to complete overhaul: 3 Also for 250, 260, 544, 574, 584, 784, 785, 884, 885 Diesel with D206, D239, D246, D268 engines, Right Hand Tabs. Quantity to order to complete overhaul: 4 Also for Hydro 70, 686, 756, 786, 826, 886, 3088 with D310, D358 engine. Right hand tabs.Quantity to order to complete overhaul: 6 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

.010" size rod bearings for Cub with C60 & Palmer M60 engine. Quantity to order to complete overhaul: 4 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

.020" size rod bearings for Cub with C60 & Palmer M60 engine. Quantity to order to complete overhaul: 4 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Undersized bearings are listed for slightly worn or crankshafts that have been ground.

.010" size rod bearings for MD, WD6, Super MD, 400, 450 Diesel with 248, 264, 281 engines. Quantity to order to complete overhaul: 4 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

.030" size rod bearings for WD9 Early Diesel. Quantity to order to complete overhaul: 4 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

.010" size rod bearings for WD9 Late Diesel. Quantity to order to complete overhaul: 4 Bearings are made with "precision tolerances" for longer engine life. Our bearings are engineered to high precision standards for performance satisfaction. Oversized bearings are listed for slightly worn or crankshafts that have been ground.

Shift Control Arm & Roller Assembly 1066 1086 1256 1456 1466 1468 1486 1566 1568 1586 21256 21456 2756 2826 2856 3088 3288 3388 3488 3588 3688 3788 6388 6588 6788 756 766 786 826 856 886 966 986 Hydro 186

21456 as a gear drive speed transmission control arm kit 454 as a gear drive speed transmission control arm kit 464 as a gear drive speed transmission control arm kit 484 all with "Z" pattern shift as a gear drive speed transmission control arm kit 574 as a gear drive speed transmission control arm kit 584 all with "Z" pattern shift as a gear drive speed transmission control arm kit 674 as a gear drive speed transmission control arm kit 684 all with "Z" pattern shift as a gear drive speed transmission control arm kit 706 fits as a gear & range transmission control arm kit 766 as a gear drive speed transmission control arm kit 784 all with "Z" pattern shift as a gear drive speed transmission control arm kit 786 as a gear drive speed transmission control arm kit 806 fits as a gear

Comes in 4 sizes; .003, .007, .015, .030. Call to check on sizes available.

Specifications 0.039" Thick 2.180" O.D. 1.867" I.D. Model Note Equipment Information Cub Belt Pulley Drive Housing Support Snap Ring Cub Loboy Belt Pulley Drive Housing Support Snap Ring M Transmission Main Shaft Bearing Snap Ring MD Transmission Main Shaft Bearing Snap Ring Super M Transmission Main Shaft Bearing Snap Ring Super MD Transmission Main Shaft Bearing Snap Ring Super MDTA Transmission Main Shaft Bearing Snap Ring MDV Transmission Main Shaft Bearing Snap Ring Super MTA Transmission Main Shaft Bearing Snap Ring MV Transmission Main Shaft Bearing Snap Ring O6 Transmission Main Shaft Pilot Bearing Snap Ring ODS6 Transmission Main Shaft Pilot Bearing Snap Ring OS6 Transmission Main Shaft Pilot Bearing Snap Ring Super W6 Transmission Main Shaft Pilot Bearing Snap Ring Super W6TA Transmission Main Shaft Pilot Bearing Snap Ring W6 Transmission Main Shaft Pilot Bearing Snap Ring Super WD6 Transmission Main Shaft Pilot Bearing Snap Ring WD6 Transmission Main Shaft Pilot Bearing Snap Ring

Specifications 0.060" Thick Model Note Equipment Information Cub Fits behind PTO shaft bearing Cub Loboy Fits behind PTO shaft bearing 154 PTO drive pulley retaining ring up to SN: 18708 2606 Transmission main shaft pilot bearing snap ring 544 Transmission main shaft pilot bearing snap ring 606 Transmission main shaft pilot bearing snap ring 664 Transmission main shaft pilot bearing snap ring

Specifications 12-9/16" long 11" wide Hydro 100 Hydro 186 21456 706 756 766 786 806 826 856 886 966 986 1026 1066 1086 1206 1256 1456 1466 1468 1486 1566 1568 1586 3088 3288 3488 3588 3688 3788 4100 4156 4166 4186 6388 6588 6788

Specifications Our spring has an overall length of 4.463", with a wire diameter of 0.083" and an outside spring diameter of 0.744". Model Note Equipment Information 706 use on the following gear drive tractor when used as a clutch pedal return spring 756 use on the following gear drive tractor when used as a clutch pedal return spring 766 use on the following gear drive tractor when used as a clutch pedal return spring 806 use on the following gear drive tractor when used as a clutch pedal return spring 826 use on the following gear drive tractor when used as a clutch pedal return spring 856 use on the following gear drive tractor when used as a clutch pedal return spring 966 use on the following gear drive tractor when used as a clutch pedal return spring 1066 use on the following gear drive tractor when used as a clutch pedal return spring 1206 use on the following gear drive tractor when used as a clutch pedal return spring 1256 use on the following gear drive tractor when used as a clutch pedal return spring 1456 use on the following gear drive tractor when used as a clutch pedal return spring 1466 use on the following gear drive tractor when used as a clutch pedal return spring 1468 use on the following gear drive tractor when used as a clutch pedal return spring 1566 use on the following gear drive tractor when used as a clutch pedal return spring 1568 use on the following gear drive tractor when used as a clutch pedal return spring 4100 use on the following model when used as a clutch pedal and brake pedal return spring 4156 use on the following model when used as a clutch pedal and brake pedal return spring 4166 use on the following model when used as a clutch pedal and brake pedal return spring

Tooth Count 16 & 35 5088 Planetary Front Axle, All Wheel Drive 5288 Planetary Front Axle, All Wheel Drive 5488 Planetary Front Axle, All Wheel Drive

MFD tractors, w/ planetary front axle. New/Reman New Quality Aftermarket Sold As Each Tooth Count 16 & 35 5088 Planetary Front Axle, All Wheel Drive 5288 Planetary Front Axle, All Wheel Drive 5488 Planetary Front Axle, All Wheel Drive

1066 1086 1206 1256 1456 1466 1468 1486 21256 21456 2706 2806 2826 2856 3088 3288 3688 706 756 766 786 806 826 856 886 966 986

Installed w/ inner needle bearings. 1066 1086 1206 1256 1456 1466 1468 1486 3088 3288 3388 3588 3688 6388 6588 706 756 766 786 806 826 856 886 966 986

Specifications 13 Teeth 1.765" overall length Hydro 70 all gas Hydro 86 all gas 340 all diesel 454 all gas 460 all gas, LP, diesel 464 all gas 504 all diesel 544 all gas 560 all gas, LP, diesel 574 all gas 606 all gas, LP, diesel 656 all gas, LP, diesel 660 all gas, LP, diesel 666 all gas 674 all gas 686 all gas 706 both gas, LP, D282 diesel 756 all gas, LP 766 all gas 806 all gas, LP 826 all gas, LP 856

Specifications 3/4" - 20 pipe thread to 7/8" - 18 thread 1.407" overall length Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Hydro 70 all gas Hydro 86 all gas 340 all diesel 454 all gas 460 all gas, LP, diesel 464 all gas 504 all diesel 544 all gas 560 all gas, LP, diesel 574 all gas 606 all gas, LP, diesel 656 all gas, LP, diesel 660 all gas, LP, diesel 666 all gas 674 all gas 686 all gas 706 both gas, LP, D282 diesel 756 all gas, LP 766 all gas 806 all gas, LP 826 all gas, LP 856

Specifications 7/8" - 18 threads Fit Squared End Tachometer Cable. Hex Nut included Model Note Equipment Information 278 584 684 784 884

Model Note Equipment Information B-250 B-275 B-414 diesel 354 diesel 364 - 384 424 diesel 444 diesel 2444 diesel

160 degree thermostat for gas tractors; Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 544, 574, 2424, 3414.

180 Degree Thermostat for 460 Gas; 560, I 560, 660 Gas; 656 Gas; I 656 Western Special, I 656 Gas; 706 and I 706 Gas; 806, 826, 856 Gas.

180 Degree Thermostat for 460, 560 Diesel; I 560, 660 Diesel; 706 and I 706 Diesels.

Specifications 37-1/4" cable length 184

Model Note Equipment Information I4 Gas and LP H Gas and LP HV Gas and LP Super H Gas and LP Super HV Gas and LP M Gas and LP Super M Gas and LP Super MTA Gas and LP MV Gas and LP Super MV Gas and LP Super MVTA Gas and LP O4 Gas and LP O6 Gas and LP OS4 Gas and LP OS6 Gas and LP T6 Gas and LP Super W4 Gas and LP W4 Gas and LP Super W6 Gas and LP Super W6TA Gas and LP W6 Gas and LP 300 Gas and LP 350 Gas and LP 400 Gas and LP W400 Gas and LP Wheatland 450 Gas and LP W450 Gas and LP Wheatland

This is a NOS (new old stock item) part in the original box. We have one.

Specifications 2.250" inside diameter 3.650" outside diameter 0.800" thickness M MD Super M Super MD Super MDV MDV Super MV Super W6 For Standard Clutch, NOT Overcenter Clutch W6 For Standard Clutch, NOT Overcenter Clutch Super WD6 For Standard Clutch, NOT Overcenter Clutch WD6

Specifications The dimensions of this pin are: 2.125" overall length, 0.497" O.D. end and 0.558" O.D. shoulder. MTA Super MTA 300 Farmall 350 Farmall 400 Farmall W400 Wheatland 450 Farmall W450 Wheatland 460 Farmall 560 Farmall 560 International 660

Specifications 29-1/4" overall length 1/4" - 28 NF threaded end 786 886 986 1086 1486 1586 3588 3788

Super MTA Super W6TA 300 Farmall Rowcrop 330 340 350 Farmall Rowcrop 400 W400 Wheatland 450 W450 Wheatland 460 504 606 660

Specifications This bolt comes as stock 3/4" shoulder size. Model Note Equipment Information Super MDV-TA MTA Super MTA Super MTA diesel Super MVTA 300 Farmall 350 Farmall 400 Farmall W400 Wheatland 450 Farmall W450 Wheatland 460 Farmland 560 660

1066 1086 1206 1256 1456 1466 1468 1486 1566 1568 1586 21206 21256 21456 2706 2806 2826 2856 3388 3588 3788 4100 4156 4166 706 756 766 786 806 826 856 886 966 986