Parts Finder




 
Batteries
Books
Brakes
Cab Parts, Glass
Camshaft Parts
Clutch, Trans, Diff, Rear Axle, PTO
Cooling Systems
Engine Parts
Filters
Front Axle, Steering
Fuel System Components
Gauges, Instruments, Cables
Hitch and Implement Components
Hoods, Grilles, Decals
Ignition & Electrical
Manuals - Service & Owners
Muffler
Paint
PTO, Drawbar
Pumps: Hydraulic & Steering
Rear Rims, Fenders
Seats
Sheet Metal and Grille
Steering
Tools
Toys, Books, & Gifts
Turn Signal
Wheels, Hubs and Components
Wiring Harnesses
 
farmall parts.com
Clutch, Trans, Diff, Rear Axle, PTO
Clutch, Trans, Diff, Rear Axle, PTO
Clutch, Trans, Diff, Rear Axle, PTO
Clutch, Trans, Diff, Rear Axle, PTO
Clutch, Trans, Diff, Rear Axle, PTO
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  | 
Pressure Plate For Farmall Cub & Cub Lo-Boy (NOT FOR 154, 185, 184)

Reman 6-1/2" Pressure Plate For Farmall Cub & Cub Lo-Boy (NOT for 154, 184

Price: $96.84 + $15.00 (core) each

More Info...
10" Clutch Pressure Plate For Farmall: H, HV, W4.
IH Number: 52900D

10" Reman Clutch Pressure Plate For Farmall: H, HV, W4. 6 Spring. Replaces IH PN# 52900d.

Price: $138.20 + $22.00 (core) each

More Info...
10" Reman Clutch Kit For Farmall: H, HV, W4

10" Reman Clutch Kit For Farmall: H, HV, W4 Contains Pressure Plate, 10in Disc, Throw Out Bearing, and Pilot Bearing.

Price: $421.80 + $28.00 (core) each

More Info...
11" Pressure Plate w/ cover and release plate for heavy duty single clutch

Specifications 11" Plate O.D. 1.580" Center Hole I.D. Includes: 3048532R1 Release lever plate 705530R1 Release lever plate retainer springs (4) 3048534R1 Cover 3048531R1 anti-rattle springs (4) 700915R1 Struts (4) 700910R1 Thrust springs (12) 705536R1 Release levers (4) 3069200R91 Release lever pins (4) 3048535R1 Pressure plate

Price: $234.75 each

More Info...
11" Reman Clutch Kit For Farmall: M, MD, MDV, MV, O-6, W6, WD6.

11" Reman Clutch Kit For Farmall: M, MD, MDV, MV, O-6, W6, WD6. Clutch kit includes 11" pressure plate, clutch disk, throwout bearing, and pilot bushing.

Price: $259.97 + $18.00 (core) each

More Info...
14" Single Stage Clutch Kit, w/ 8 Large Pad Disc, Bearings & Seals - New

Size 14" Flywheel Step 1.938" Hub Size 1-3/4" Spline Count 17 PPA Levers 3 PPA Springs 15 Coil Springs Flywheel Disc Spec 8 Large Pads; 1-3/16" 11 Spline Hub; Spring Center New/Reman New Sold As Each 1066 Hydraulic Assist Recommended 1086 Hydraulic Assist Recommended 1206 Hydraulic Assist Recommended 1256 Hydraulic Assist Recommended 1456 Hydraulic Assist Recommended 1466 Hydraulic Assist Recommended 1468 Hydraulic Assist Recommended 1486 Hydraulic Assist Recommended 21206 Hydraulic Assist Recommended 21256 Hydraulic Assist Recommended 21456 Hydraulic Assist Recommended 3688 Hydraulic Assist Recommended 4100 Hydraulic Assist Recommended 4156 Hydraulic Assist Recommended 4166 Hydraulic Assist Recommended 4186 Hydraulic Assist Recommended 966 Hydraulic Assist Recommended 986 Hydraulic Assist Recommended

Price: $848.15 each

More Info...
14" Single Stage Clutch Kit, w/ Bearings & Seals - New

Includes: (PPA), HD6 (Heavy Duty 6-Pad Disc), (Greaseable Release Bearing), (Pilot Bearing), (Inner IPTO Seal), (Outer IPTO Seal) & (IPTO Bearing Cage O-Ring) Size 14" Flywheel Step 1.938" Hub Size 1-3/4" Spline Count 17 PPA Levers 3 PPA Springs 15 Coil Springs Flywheel Disc Spec 6 Large Pads; 1-3/16" 11 Spline Hub; Spring Center New/Reman New 1066 Hydraulic Assist Recommended 1086 Hydraulic Assist Recommended 1206 Hydraulic Assist Recommended 1256 Hydraulic Assist Recommended 1456 Hydraulic Assist Recommended 1466 Hydraulic Assist Recommended 1468 Hydraulic Assist Recommended 1486 Hydraulic Assist Recommended 21206 Hydraulic Assist Recommended 21256 Hydraulic Assist Recommended 21456 Hydraulic Assist Recommended 3688 Hydraulic Assist Recommended 4100 Hydraulic Assist Recommended 4156 Hydraulic Assist Recommended 4166 Hydraulic Assist Recommended 4186 Hydraulic Assist Recommended 966 Hydraulic Assist Recommended 986 Hydraulic Assist Recommended

Price: $823.95 each

More Info...
1st & 2nd Speed Sliding Gear

25 degree. Tooth Count 41, 46 1066 1086 1456 1466 1468 1486 2756 Farmall Models Eff. S/N 17636 & IH Models Eff. S/N 8425 2856 Farmall Models Eff. S/N 27287

Price: $809.53

More Info...
3rd & 4th Speed Sliding Gear

25 degree. New/Reman New Sold As Each Tooth Count 31 1066 1086 1456 1466 1468 1486 2756 Farmall Models Eff. S/N 17636 & IH Models Eff. S/N 8425 2856 Farmall Models Eff. S/N 27287

Price: $514.95

More Info...
4th & 5th Speed Sliding Gear

Specifications Teeth: 18 & 35 H

Price: $174.17 each

More Info...
4th and 5th Speed Slider Gear

Specifications Teeth: 20 & 34 M MD MDV MV

Price: $208.16 each

More Info...
4th and 5th Speed Sliding Gear - Super M Super W6

Specifications Teeth: 20 & 30 Super M Super W6

Price: $298.68 each

More Info...
7" TA Disc, Full Metallic, w/ 1-1/2" 14 Spline Hub - New

7" TA Disc, Full Metallic, w/ 1-1/2" 14 Spline Hub - New Size 7" Hub Size 1-1/2" Spline Count 14 Disc Center Solid Disc Type Full Metallic New/Reman New Sold As Each 2504 2544 2606 2656 300 330 340 350 400 450 460 504 544 560 606 656 660 664 666 686 Super MTA Super W6TA W6TA

Price: $193.13

More Info...
Bearing - Outer
IH Number: ST219A

Bearing Deep Groove, Brg 6213

Price: $48.96 each

More Info...
Bearing, Front, Transmission Spline Shaft

Specifications 1.850" O.D. 0.983" I.D. 0.473" Width Cub as a front upper transmission main shaft bearing Cub Loboy as a front upper transmission main shaft bearing 154 as a front upper transmission main shaft bearing 184 as a front upper transmission main shaft bearing 185

Price: $32.94 each

More Info...
Belt Pulley Drive Shaft Oil Seal For Farmall Cub
IH Number: 351276r91

Belt Pulley Drive Shaft Oil Seal For Farmall Cub. Replaces Ih#351276r91

Price: $21.87 each

More Info...
Brake Disc Seal Kit

Specifications 4-piece kit with O-rings and oil seal for bull pinion shaft Complete kit for 1 side of tractor Includes: 530806R91 oil seal 530789R1 inner piston O-ring 530807R1 outer piston O-ring 70923596 brake piston housing O-ring Hydro 100 21456 706 756 766 806 826 856 966 1026 1066 1206 1256 1456 1466 1468

Price: $35.76 each

More Info...
Brake Lock Assist Attachment

Specifications This brake lock assist attachment bolts to the rear (closest side to driver) of the hydraulic reservoir. Instructions and complete hardware are included. Super M SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MD SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MDV SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MDV-TA MTA Super MTA Super MTA diesel Super MV SN''s: F28175 and up or L504802 and up; with hydraulic reservoir under the fuel tank Super MVTA

Price: $136.17 each

More Info...
Brake Lock Assist Attachment (Brake Pedal Pawl Rod and mounting brackets w/ hardware)

Specifications This brake lock assist attachment bolts to the lower dash panel. Instructions and complete hardware are included. 400 Farmall 450

Price: $137.09 each

More Info...
Brake Pedal Pawl Pin

I4 C Super C H HV Super H Super HV M MD Super M Super MD Super MDV MDV Super MDV-TA MTA Super MTA Super MTA diesel MV Super MV Super MVTA Super W4 W4 Super W6 Super W6TA W6 Super WD6 WD6 200 230 300 Farmall 350 Farmall 400 Farmall W400 Wheatland 450 British 450 Farmall W450 Wheatland 460 Farmall 560 660

Price: $24.62 each

More Info...
Brake Pedal Return Spring

Specifications 4.073" Inside Hook to Hook 0.875" Body OD. Other Application Info Also Fits the following International Models: 7110 7120 7130 7140 7150 7210 7220 7230 7240 7250 Hydro 186 786 886 986 1086 1486 1586 3088 3288 3488 3588 3688 3788 5088 5288 5488 6388 6588

Price: $40.12 each

More Info...
Brake Pedal Return Spring

Specifications 6.470" overall length 0.8735" spring O.D. 0.095" wire diameter 2 used per tractor Sold individually Hydro 100 756 766 826 856 966 1026 1066 1256 1456 1466 1468 1566 1568

Price: $32.94 each

More Info...
BRAKE PEDAL RETURN SPRING, CLUTCH PEDAL RETURN SPRING
IH Number: 48599DA

BRAKE PEDAL RETURN SPRING, CLUTCH PEDAL RETURN SPRING --- ALL W/ BAND BRAKES --- USA MADE --- OVERALL LENGTH = 8-1/8" --- International Applications: BRAKE PEDAL RETURN SPRING FOR: H, HV, M, MV, MD, MDV, FITS AS A CLUTCH PEDAL RETURN SPRING FOR INTERNATIONAL 544, 2544 ---

Price: $24.21 each

More Info...
Bull Pinion and Brake Shaft Seal - M, MD, O6 And More

Fits Models: Model Note Equipment Information M MD MDV MV O6 ODS6 OS6 W6 WD6

Price: $19.26 each

More Info...
Bull Pinion Shaft Bearing Cage O-Ring

Specifications 5-1/16" inside diameter 5-17/32" outside diameter 15/64" wide 2 required per tractor Sold Individually H SN: 5986 & up Super H 300 Farmall (Row-Crop) and International (Utility) 330 340 Farmall (Row-Crop) and International (Utility) 350 Farmall (Row-Crop) and International (Utility) 460 Farmall (Row-Crop) and International (Utility) 504 Farmall (Row-Crop) and International (Utility) 544 International (Utility) only 606

Price: $39.04 each

More Info...
Bull Pinion Shaft Bearing Cage O-ring - M, SUPER M, MD and More

Model Note Equipment Information M up to SN: 294225 with band brakes MD up to SN: SN: 285504 with brake bands Super M Super MD Super MDV MDV up to SN: SN: 285504 with band brakes Super MDV-TA MTA Super MTA MV up to SN: 294225 with band brakes Super MVTA Super W6 W6TA Super WD6 400 W400 450 W450 560 660

Price: $44.29 each

More Info...
Bull Pinion Shaft Bearing Retainer Oil Seal

Specifications 2.313" inside diameter 3.505" outside diameter 0.313" width 2 used per tractor; sold individually I4 used as a bull pinion shaft bushing retainer oil seal H up to SN: 391357 used as a bull pinion shaft bushing retainer oil seal HV up to SN: 391357 used as a bull pinion shaft bushing retainer oil seal O4 used as a bull pinion shaft bushing retainer oil seal OS4 used as a bull pinion shaft bushing retainer oil seal W4

Price: $32.45 each

More Info...
Bull Pinion Shaft Bearing Retainer Oil Seal - C

Specifications 2.125" I.D. 3.355" O.D. 0.438" width C

Price: $47.28 each

More Info...
Bull Pinion Shaft Bearing Retainer Seal O-Ring

Specifications 4.475" inside diameter 0.210" thick Fits Models: Model Note Equipment Information M SN: 294226 and up with disc brakes MD SN: 28505 and up with disc brakes Super M Super MD Super MDV MDV SN: 28505 and up with disc brakes Super MDV-TA MTA Super MTA MV SN: 294226 and up with disc brakes Super MVTA Super W6 W6TA Super WD6 400 W400 450 W450 560

Price: $26.88 each

More Info...
Bull Pinion Shaft Snap Ring For Farmall H.
IH Number: 358059R1

Bull Pinion Shaft Snap Ring For Farmall H. IH PN#:358059r1

Price: $8.25 each

More Info...
Clutch Alignment Tool

Specifications Plastic 10 splines 15/16" spline outside diameter 0.625" pilot diameter Model Note Equipment Information Cub Cub Loboy 154 185

Price: $15.30 each

More Info...
Clutch Alignment Tool

Specifications The dimensions of this tool are: 10 spline 1-1/4" spline O.D. 0.970" O.D. pilot 5-1/2" overall length. I4 H HV Super H Super HV O4 W4

Price: $41.18 each

More Info...
Clutch Alignment Tool

Specifications Pilot: 0.787" diameter small spline: 1-3/16" 11 spline large spline: 1-3/4" 17 spline Super MTA Super MTA diesel 21456 400 W400 Wheatland 450 W450 Wheatland 560 660 706 756 766 786 806 826 856 886 966 986 1066 1086 1206 1256 1456 1466 1468 1486 3088 3288 3688 4100 4156 4166 4186

Price: $45.30 each

More Info...
Clutch Alignment Tool

Specifications Spline diameter: 1-1/2"; 10 splines; 10-3/4" long; 0.965" pilot O.D M MD Super M Super MD Super MDV MDV MV Super MV O6 ODS6 OS6 T20 Super W6 both up to SN: 9084 Super WD6 both up to SN: 9084 F20 Regular

Price: $38.63 each

More Info...
Clutch Alignment Tool

Specifications The dimensions of this tool are: 0.787" pilot O.D. 9-3/8" overall length (small spline) 1-1/8" spline O.D. with 10 splines (large spline) 1-11/16" spline O.D. with 16 spline. 300 330 340 350 460 504 544 606 656 664 666 686

Price: $44.81 each

More Info...
Clutch Alignment Tool

Specifications 6 spline 1.250" spline O.D. 0.865" pilot O.D. 5.875" overall length A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C 100 130 140 200 230 240 404

Price: $40.69 each

More Info...
Clutch Alignment Tool For Farmall: B275, B276, B414, 354, 364, 384, 424, 434, 444, 2300A, 2300, 2424, 2444, 3414, 3444.

Clutch Alignment Tool For Farmall: B275, B276, B414, 354, 364, 384, 424, 434, 444, 2300A, 2300, 2424, 2444, 3414, 3444. Pilot Dimensions .787", 1st Spline= 1-1/8" 10 Spline, 2nd Spline= 1-3/4" 10 Spline.

Price: $44.84 each

More Info...
Clutch and Brake Pedal Shaft

Specifications Bare metal 22.20" long 1.130" diameter Model Note Equipment Information H sn 391358 and up, Rowcrop and Utility with DISC BRAKES HV sn 391358 and up, Rowcrop and Utility with DISC BRAKES Super H Rowcrop and Utility with DISC BRAKES Super HV Rowcrop and Utility with DISC BRAKES Super W4 Rowcrop and Utility with DISC BRAKES 300 Rowcrop and Utility with DISC BRAKES 330 Rowcrop and Utility with DISC BRAKES 350 Rowcrop and Utility with DISC BRAKES

Price: $132.97 each

More Info...
Clutch and Brake Pedal Shaft

Specifications Bare metal 22.56" long 1.130" diameter Model Note Equipment Information H with BAND BRAKES, up to sn 391357 HV with BAND BRAKES, up to sn 391357

Price: $132.97 each

More Info...
Clutch And Brake Pedal Shaft

Specifications Bare metal --- 19.95" Long 1.130" Diameter Model Note Equipment Information C

Price: $113.28 each

More Info...
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  | 
Follow • Like • Subsribe
Credit Card Badges
We accept all major credit cards including:
Visa, Mastercard, American Express, & Discover.
Terms & Conditions Shipping Policy

A division of ©2024 Pacific Supply Group, Inc.