Clutch Release Bearing For IH 254 Tractors I.D. 1.572" O.D. 2.643" Width 0.776"
Specifications 1.470" O.D. 5.067" long 1.280" I.D Note: This is the tube that the throw out bearing carrier slides on. It presses into the clutch housing. A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C 100 130 140 200 230 240 404
Specifications 7-5/8" overall length A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C 100 130 140 200 230 240 404
Specifications dimensions= 0.373 diameter, 5.695 length -- improved design using 4140 steel Other Application Info DO NOT START ENGINE WITHOUT CHECKING CLUTCH PRESSURE PLATE FINGER CLEARANCE, FAILURE TO DO SO COULD DAMAGE THE PRESSURE PLATE & THROW OUT BEARING, ADJUST CLUTCH LINKAGE PER INSTRUCTIONS. -------------(WILL NOT FIT 154, 184, 185) Model Note Equipment Information Cub Cub Loboy Cub LoBoy
Specifications 2.062" inside diameter 3.027" face outside diameter 3.285" overall outside diameter 0.810" thickness A SOME, Fits the following when equipped with replaceable rotating throwout bearing I4 when equipped with replaceable rotating throwout bearing AV when equipped with replaceable rotating throwout bearing Super A when equipped with replaceable rotating throwout bearing Super A-1 when equipped with replaceable rotating throwout bearing Super AV when equipped with replaceable rotating throwout bearing Super AV-1 when equipped with replaceable rotating throwout bearing B when equipped with replaceable rotating throwout bearing BN when equipped with replaceable rotating throwout bearing C when equipped with replaceable rotating throwout bearing Super C when equipped with replaceable rotating throwout bearing H when equipped with replaceable rotating throwout bearing HV when equipped with replaceable rotating throwout bearing Super H when equipped with replaceable rotating throwout bearing Super HV when equipped with replaceable rotating throwout bearing Super W4 when equipped with replaceable rotating throwout bearing W4 when equipped with replaceable rotating throwout bearing 100 when equipped with replaceable rotating throwout bearing 130 when equipped with replaceable rotating throwout bearing 140 when equipped with replaceable rotating throwout bearing 200 when equipped with replaceable rotating throwout bearing 230 when equipped with replaceable rotating throwout bearing 240 when equipped with replaceable rotating throwout bearing 404
Specifications 2.375" I.D. (Bore) 3.500 O.D. 0.730 Width Thrust bearing T340 Industrial 300 330 340 350 424 single clutch 444 single clutch 454 460 464 484 504 544 574 584 606 656 664 666 674 684 686 784 785 884
Specifications Sealed bearing, no need to grease 2.490" inside diameter 4.060" outside diameter 0.870" wide Super MDV-TA Super MTA Super MTA diesel Super MVTA W9 Without over center clutch Super WD9 Without over center clutch WD9 Without over center clutch 21456 400 W400 Wheatland 450 W450 Wheatland 560 600 Without over center clutch 650 Without over center clutch 660 706 756 766 786 806 826 856 966 986 1066 1086 1206 1256 1456 1466 1468 1486 1566 1568 1586 3088 3288 3588 3688 3788 4100 4156 4166 4186 6388 6588 6788
Specifications Teeth: 55 H HV Super H Super HV O4 OS4 Super W4 W4
H Farmall HV Farmall Super H Farmall Super HV Farmall O4 McCormick Deering OS4 McCormick Deering Super W4 McCormick W4 McCormick Deering
154 w/ creeper (reduction) gear & updated to 1/8" keyway 184 w/ creeper (reduction) gear
154 W/ Creeper (Reduction) drive 184 W/ Creeper (Reduction) drive 185
154 w/ creeper (reduction) drive 184 w/ creeper (reduction) drive 185
Other Application Info 0.312 inch I.D. 154 w/ creeper (reduction drive) 184 w/ creeper (reduction drive) 185 w/ creeper (reduction drive)
154 w/ creeper (reduction drive) & updated to 1/8" keyway 184 w/ creeper (reduction drive)
Fits all Cubs. Your Cub needs two of these gaskets. Made in the USA
5088 5288 5488
MFD tractors. 5088 Planetary Front Axle, All Wheel Drive 5288 Planetary Front Axle, All Wheel Drive 5488 Planetary Front Axle, All Wheel Drive
Differential Shaft Bearing For Farmall: 100, 130, 140. Replaces IH PN#:ST249
Specifications Includes 4 Disc Linings and 36 rivets Per Side 7.00" O.D. 4.00" I.D. 0.193" Thick Use to reline riveted brake discs 433
Specifications 1/32" thick 5.445" center hole inside diameter 0.688" hole inside diameter (x6) 0.440" mounting holes Model Note Equipment Information H Farmall HV Farmall Super H Farmall Super HV Farmall
Model Note Equipment Information I4 H Farmall HV Farmall O4 McCormick Deering OS4 McCormick Deering W4 McCormick Deering
Dual PTO Drive Pulley For Farmall Cub Lo-Boy 154. Replaces International Part Number#: 404932r2
Fits Farmall Super C, 200, 230 240. Farmalls with C123 Engine.
10 1/2" Reman Clutch Kit Contents: Pressure Plate, Disc, Release Bearing, Pilot Bearing, IPTO Seals, and IPTO Bearing Cage O-Ring Flywheel Step Specification 1.188"
Transmission Top Cover Gasket For Farmall H Tractors. This the top cover that is located below your shift lever. Replaces IH PN#: 48646d
Specifications 2.000" inside diameter 2.920" outside diameter 0.375" wide Sold individually A 2 used per tractor when used as a rear stub axle felt washer AV 2 used per tractor when used as a rear stub axle felt washer Super A 2 used per tractor when used as a rear stub axle felt washer Super A-1 2 used per tractor when used as a rear stub axle felt washer Super AV 2 used per tractor when used as a rear stub axle felt washer Super AV-1 2 used per tractor when used as a rear stub axle felt washer B 2 used per tractor when used as a rear stub axle felt washer BN 2 used per tractor when used as a rear stub axle felt washer F20 4 used per tractor when used as a differential counter shaft ball bearing felt washer Regular
Specifications 2 used per tractor; sold individually Mounts in 6578D 3 bolt differential retainer 2.378" outside diameter 1.531" inside diameter 0.500" wide Replaces SKF # 15330 Model Note Equipment Information A AV Super A Super A-1 Super AV Super AV-1 B BN 100 130 140
Specifications Includes: (1) 43245D Rear Axle Housing Oil Pan Gasket, IHS3024 (1) 1342398C1 (sub for 48009DB) Differential Shaft Bearing Cover gasket (1) 47954D Rear Axle Housing Bearing Cap Gasket. (1) 1342398C1 (sub for 48009DB) Rear Axle Bearing Retainer Gasket 2 kits used per tractor - 1 kit used for each final drive Kit is sold individually A AV Super A Super A-1 Super AV Super AV-1 B BN
Specifications Contains 1 each - rear axle housing oil pan gasket outer oil seal cap gasket inner axle bearing cap gasket upper differential shaft gasket differential bearing retainer O-ring (seals the differential bearing retainer to the transmission case) Other Application Info 2 kits used per tractor 1 kit per side Model Note Equipment Information Cub Cub Loboy Cub LoBoy 154 184 185
Other Application Info Please use thread locker on the bolt and be careful not too over torque it. Cub Cub Loboy 154 184 185
Specifications Machined Flat Ends 1.430" Long 0.072" wire dia. 0.562" O.D. 0.418" I.D. Super A C Super C Cub 200 230 240 B-414 300 330 340 350 354 364 - 384 400 424 444 450 460 560
Tooth Count 126 Flywheel Step 1.406" New/Reman New OD 15.930" Sold As Each 584 IH D206 Diesel Engine, For Use w/ 12" Clutch 624 IH D206 Diesel Engine, For Use w/ 12" Clutch 684 IH D239 Diesel Engine, For Use w/ 12" Clutch 784 IH D246 Diesel Engine, For Use w/ 12" Clutch 785 IH D246 Diesel Engine, For Use w/ 12" Clutch
The HC672211C91 Flywheel, w/ Ring Gear Tooth Count 132 Flywheel Step 1.406" New/Reman New OD 16.69" Sold As Each 1066 IH DT414 Diesel Engine, Hydro Tractor 3488 IH DT466 Diesel Engine, Hydro Tractor 3688 IH D436 Diesel Engine, For Use w/ 12" Clutch 766 IH D360 Diesel Engine 886 IH D360 Diesel Engine 966 IH D414 Diesel Engine, For Use w/ 12" Clutch 986 IH D436 Diesel Engine, For Use w/ 12" Clutch Hydro 100 IH D436 Diesel Engine, Hydro Tractor Hydro 186 IH D436 Diesel Engine, For Use w/ 12" Clutch
Tooth Count 132 Flywheel Step 1.938" New/Reman New OD 16.69" Sold As Each 1206 IH DT361 Diesel Engine 1256 IH DT407 Diesel Engine 1456 IH DT407 Diesel Engine 21206 IH DT361 Diesel Engine 21256 21456
Specifications For hand control levers (hydraulic lift) 1.650" O.D. 0.500" hole 0.150" thick Rubberized cork Model Note Equipment Information Super A 2 used Super A-1 2 used Super AV 2 used Super AV-1 2 used C 2 used Cub 1 used Cub Loboy 1 used 100 2 used 130 2 used 140 2 used 200 2 used
Other Application Info 1.400" overall length 0.625" outside diameter 21456 all with gear drive only 706 all with gear drive only 756 all with gear drive only 766 all with gear drive only 806 all with gear drive only 826 all with gear drive only 856 all with gear drive only 966 all with gear drive only 1066 all with gear drive only 1206 all with gear drive only 1256 all with gear drive only 1456 all with gear drive only 1466 all with gear drive only 1468 all with gear drive only 1566 all with gear drive only 1568 all with gear drive only 4100 all with gear drive only 4156 all with gear drive only 4166 all with gear drive only 4186
Model Note Equipment Information I4 gas H gas HV gas Super H gas Super HV gas M gas Super M gas Super MTA gas MV gas High Clearance O4 gas O6 gas OS6 gas Super W4 gas W4 gas Super W6 gas Super W6TA gas W6 gas W9 gas WR9 gas WR9S gas 300 gas Farmall (Row-Crop) and International (Utility) 350 gas Farmall (Row-Crop) and International (Utility) 400 gas W400 gas 450 gas W450 gas 600 gas 650 gas
Specifications 1/16" thick (x6) 0.350" mounting holes Model Note Equipment Information H HV Super H Super HV M Super M Super MTA MV O4 O6 OS4 OS6 Super W4 W4 Super W6 Super W6TA W6 W9 WR9 300 Farmall and International 350 Farmall and International 400 W400 450 W450
Specifications 1/32" thick (x3) 0.405" mounting holes 2.493" hole I/D Model Note Equipment Information H HV Super H Super HV M Super M Super MTA MV O4 O6 OS4 OS6 Super W4 W4 Super W6 Super W6TA W6 W9 WR9 300 Farmall and International 350 Farmall and International 400 W400 450 W450
Specifications 3.729" overall length 0.100" wire diameter 0.697" body O.D. Hydro 70 gas Hydro 86 gas 454 gas 464 gas 544 gas 574 gas 606 gas 656 gas 666 gas 674 gas 686 gas 706 gas 756 gas 766 gas 806 gas 826 gas 856