Specifications 0.863" I.D. 0.935" O.D. 1.248" overall length sold individually Hydro 70 all gas/LP Hydro 86 all gas/LP 300 gas/LP; engine SN: 48055 and up 350 all gas/LP 460 all gas/LP 460 up to engine SN: 5610 early diesels 544 all gas/LP 560 all gas/LP 560 up to engine SN: 6765 early diesels 574 all gas/LP 606 all gas/LP 656 all gas/LP 660 all gas/LP 660 up to engine SN: 4369 early diesels 666 all gas/LP 674 all gas/LP 686 all gas/LP 706 all gas/LP 756 all gas/LP 766 all gas/LP 806 all gas/LP 826 all gas/LP 856

1-9/16" I.D. 1-13/16" O.D.

Pre-Combustion Chamber w/ upper and lower gaskets B-250 w/ BD-144 ESN 17289 & up B-275 w/ BD-144 ESN 17289 B-276 w/ BD-144 ESN 17289 B-414 w/ BD-154 engine 354 w/ BD-144 ESN 17289

Specifications 2" base inside diameter 5-1/2" bowl diameter B-275 with 2" outside diameter pipe 340 with 2" outside diameter pipe 350 diesel with 2" outside diameter pipe International Utility 350 with 2" outside diameter pipe Farmall Rowcrop 404 with 2" outside diameter pipe 424 with 2" outside diameter pipe 444 with 2" outside diameter pipe 504

Premium Carburetor Repair Kit throttle shaft throttle plate choke shaft choke plate throttle shaft bushings and packing metering nozzle brass plugs float pin needle and seat gaskets fuel strainer & more... 656 all with 388424R91, 388424R92, 388424R93, 388424R94, 388424R95, 388424R96, 396197R91, 396197R92 carburetors 706 all with 388424R91, 388424R92, 388424R93, 388424R94, 388424R95, 388424R96, 396197R91, 396197R92 carburetors 756 all with 388424R91, 388424R92, 388424R93, 388424R94, 388424R95, 388424R96, 396197R91, 396197R92 carburetors 766 all with 388424R91, 388424R92, 388424R93, 388424R94, 388424R95, 388424R96, 396197R91, 396197R92 carburetors

Premium Carburetor Repair Kit 656 all with 381419R91, 381419R92, 396198R91, 396198R92 IHC carburetors 706 all with 381419R91, 381419R92, 396198R91, 396198R92 IHC carburetors 756 all with 381419R91, 381419R92, 396198R91, 396198R92 IHC carburetors

Premium Carburetor Repair Kit 460 with 367258R91, 367258R92 carburetors must reuse old nozzle

Premium Carburetor Repair Kit T340 all with TSX748 (IH # 372985R91) Marvel Schebler carburetor 330 all with TSX748 (IH # 372985R91) Marvel Schebler carburetor 340 all with TSX748 (IH # 372985R91) Marvel Schebler carburetor 404 all with TSX748 (IH # 372985R91) Marvel Schebler carburetor

Specifications Grade 8 5/16-18 x 1-5/8" long 154 SN: 15072 and up 154 up to SN: 15072 if using our later SN pressure plate IHS1234 185

4 points of surface contact. 0.700" I.D.

Model Note Equipment Information M MD MDV MV 400 Farmall 450 Farmall 560 560 Farmall 660

PUSH/PULL SWITCH KNOB --- 10-32" THREAD --- International Applications: CUB, A, AV, B, BN, C, H, HV, M, MV, MD, O4, OS4, W4, W9, WD9, WR9, WDR9, W6, WD6, O6, OS6, ODS6, SUPER A, SUPER C, SUPER H, SUPER M, SUPER MTA --- Replacement Part #: 8732D

Specifications 11-1/4" long Model Note Equipment Information 1822 cotton picker Hydro 100 Hydro 186 966 986 1066 1086 1466 1486 1566 1586 3488 3588 3688 3788 4166 4186 4366 5088 5288 5488 6388 6588 6788

Specifications 0.315" O.D. 10.688" long B-250 all with BD144, BD154 diesel engines B-275 all with BD144, BD154 diesel engines B-276 all with BD144, BD154 diesel engines B-414 all with BD144, BD154 diesel engines 354 all with BD144, BD154 diesel engines 384 all with BD144, BD154 diesel engines 424 all with BD144, BD154 diesel engines 444

Pushrod 12.684 O/A length 0.375 tube O.D.

454 with C157, (C175 1973 and up) and C200 gas or LP engine 464 with C157, (C175 1973 and up) and C200 gas or LP engine 544 with C157, (C175 1973 and up) and C200 gas or LP engine 574 with C157, (C175 1973 and up) and C200 gas or LP engine 674

Model Note Equipment Information TD6 gas or diesel, 62 series Industrial Hydro 70 gas and LP Hydro 86 gas and LP 460 Diesel 460 gas and LP 560 Diesel 560 gas and LP 606 Diesel 606 gas and LP 656 Diesel 656 gas and LP 660 gas and LP 666 gas and LP 686 gas and LP 706 Diesel, with D282 706 gas and LP 756 gas and LP 766 gas and LP 806 gas and LP 826 gas and LP 856 gas and LP

Rain Cap, 2-3/4" to 2-15/16" ID Fits pipe OD of 2-3/4" to 2-15/16"

Specifications Fits pipe outside diameter (OD) 1.370" - 1.475" A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C Cub 100 130 200 230

Specifications Fits mufflers and exhaust pipes with 2.450" to 2.560" outside diameter range Painted with high temperature aluminum color paint M with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler MD with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super M with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super MD with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super MDV with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler MDV with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super MDV-TA with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super MTA with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super MV with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super MVTA with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler T6 with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler TD6 with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super W6 with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Super W6TA with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler W6 with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler W6TA with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler WD6 with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler 340 Diesel only 400 with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler W400 W400, with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Wheatland 450 with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler W450 W450, with IHS311 or IHS313 mufflers only, does not fit IHS1926 muffler Wheatland 460 504 Diesel only 544 560 606 656 Gear drive only 660

Fits Models: A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C O12 2-piece rear felt seal ONLY fits as a rear crankshaft seal O14 2-piece rear felt seal ONLY fits as a rear crankshaft seal T340 gas, up to engine SN: 100500 T5 gas, up to engine SN: 100500 W12 2-piece rear felt seal ONLY fits as a rear crankshaft seal W14 2-piece rear felt seal ONLY fits as a rear crankshaft seal F12 2-piece rear felt seal ONLY fits as a rear crankshaft seal F14 2-piece rear felt seal ONLY fits as a rear crankshaft seal 100 130 140 200 230 240 330 340 gas, up to engine SN: 100500

Specifications 3.630" inside diameter (ID) 4.380" outside diameter (OD) 0.435" wide B-250 with BC144 gas, BD144 diesel, BD154 diesel; all with engine SN: 26077 and up B-275 with BC144 gas, BD144 diesel, BD154 diesel; all with engine SN: 26077 and up B-276 with BC144 gas, BD144 diesel, BD154 diesel; all with engine SN: 26077 and up B-414 with BC144 gas, BD144 diesel, BD154 diesel; all with engine SN: 26077 and up 354 with BC144 gas, BD144 diesel, BD154 diesel; all with engine SN: 26077 and up 384 with BC144 gas, BD144 diesel, BD154 diesel; all with engine SN: 26077 and up 424 with BC144 gas, BD144 diesel, BD154 diesel; all with engine SN: 26077 and up 444

Specifications 3.375" inside diameter 4.381" outside diameter 0.437" wide Other Application Info Also Fits EARTHMASTER Model C and CH. VA up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAC up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAC-11 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAC-12 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAC-13 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAC-14 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAH up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAIW up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAIW-3 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAO up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAO-15 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. VAS up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 200 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 200B up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 210B up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 211B up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 210 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 211 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 300 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 311 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 312 up to 1960 with G124, 148, GD157 4-cylinder gas, LP, diesel. 320

Our Farmall Cub rear main crankshaft seal is designed to fit both early and late seal retainers. This seal is stepped; one side has an outside diameter of 3.884" and the other side has an outside diameter of 3.875".

Teflon style seal. Do not separate the Wear Sleeve prior to installation. 1026 IH DT407 Diesel 1066 IH DT414 Diesel 1086 IH DT414 Diesel 1206 IH DT361 Diesel 1256 IH DT407 Diesel 1456 IH DT407 Diesel 1466 IH DT436 Diesel 1486 IH DT436 Diesel 1566 IH DT436 Diesel 1586 IH DT436 Diesel 21026 IH DT407 Diesel 21206 IH DT361 Diesel 21256 21456 2856 IH D407 Diesel 3388 IH DT436 Diesel 3488 IH DT466 Diesel 3588 IH DT466 Diesel 3688 IH D436 Diesel 3788 IH DT466 Diesel 4100 IH DT429 Diesel 4156 IH DT429 Diesel 4166 IH DT436 Diesel 4186 IH DT436 Diesel 4366 IH DT466 Diesel 4386 IH DT466 Diesel 5088 IH DT436 Diesel 5288 IH DT466 Diesel 5488 IH DT466 Diesel 6388 IH DT436 Diesel 6588 IH DT466 Diesel 666 IH D312 Diesel, Correct Installer Required 6788 IH DT466 Diesel 686 IH D312 Diesel 7288 IH DT466 Diesel 7388 IH DT466 Diesel 7488 IH DT466 Diesel 766 IH D360 Diesel 806 IH D361 Diesel 856 IH D407 Diesel 886 IH D360 Diesel 966 IH D414 Diesel 986 IH D436 Diesel Hydro 100 IH D436 Diesel Hydro 186 IH D436 Diesel Hydro 70 IH D312 Diesel Hydro 86 IH D312 Diesel

Neoprene style. 1026 IH DT407 Diesel 1066 IH DT414 Diesel 1086 IH DT414 Diesel 1206 IH DT361 Diesel 1256 IH DT407 Diesel 1456 IH DT407 Diesel 1466 IH DT436 Diesel 1486 IH DT436 Diesel 1566 IH DT436 Diesel 1586 IH DT436 Diesel 21026 IH DT407 Diesel 21206 IH DT361 Diesel 21256 21456 2856 IH D407 Diesel 3388 IH DT436 Diesel 3488 IH DT466 Diesel 3588 IH DT466 Diesel 3688 IH D436 Diesel 3788 IH DT466 Diesel 4100 IH DT429 Diesel 4156 IH DT429 Diesel 4166 IH DT436 Diesel 4186 IH DT436 Diesel 4366 IH DT466 Diesel 4386 IH DT466 Diesel 5088 IH DT436 Diesel 5288 IH DT466 Diesel 5488 IH DT466 Diesel 6388 IH DT436 Diesel 6588 IH DT466 Diesel 666 IH D312 Diesel 6788 IH DT466 Diesel 686 IH D312 Diesel 7288 IH DT466 Diesel 7388 IH DT466 Diesel 7488 IH DT466 Diesel 766 IH D360 Diesel 806 IH D361 Diesel 856 IH D407 Diesel 886 IH D360 Diesel 966 IH D414 Diesel 986 IH D436 Diesel Hydro 100 IH D436 Diesel Hydro 186 IH D436 Diesel Hydro 70 IH D312 Diesel Hydro 86 IH D312 Diesel

This kit contains 8 pieces. Includes gaskets and felt seals to replace rear main seal.

This is an 18-piece kit with the (6) following gaskets and (2) felt seals to replace the rear main seal: (2) 25093DA Rear oil seal retainer rubber plugs (2) 46121DA Center retainer gaskets (1) 46131DB Retainer gasket (1) 46134DA Rear seal retainer plate gasket (2) 57613DA Oil seal felts These are the 10 extra gaskets (1) 46137D Rear dust seal gasket (1) 21632D Carburetor to manifold gasket (1) 45685D Governor housing front gasket (1) 45981D Water pump base gasket (1) 46181DB Inner timing gear cover (1) 46182DA Outer timing cover gasket (2) 46186D Distributor / Magneto drive housing gaskets (1) 46700D Crankcase breather tube gasket (1) 64155D Oil seal felts BMD Following British built gas/dsl M Gas or LP Super M Gas or LP MTA Gas or LP Super MTA Gas or LP MV Gas or LP Super MV Gas or LP O6 Gas or LP OS6 Gas or LP T6 Gas or LP Super W6 Gas or LP Super W6TA Gas or LP W6 Gas or LP 400 Gas or LP W400 Gas or LP 450 Gas or LP B-450 Following British built gas/dsl W450

Specifications 9 piece set For 4 Cylinder Diesel Engines Retainer gasket: 46240DA, 46240DB Retainer plate gasket: 51980D Rear dust seal gasket: 46137D (2) Center retainer gaskets: 259530R1, 259530R2, 271702R1 (2) Felt plugs: 25093D, 25093DA (2) Retainer felts: 46132D, 260001R1, 260001R2 Model Note Equipment Information MD Super MD Super MDV MDV Super MDV-TA MTA Super MTA ODS6 TD6 Super WD6 WD6 400 up to Engine SN: 13481 W400

Specifications 13 piece kit includes: (2) 24425D, 24425DA felt seals (2) 43447D, 43447DA seal retainer center gaskets (1) 43448D seal retainer to block gasket (4) 43445D seal plate felt plugs (4) 43446D, 43446DA seal retainer plate gaskets A AV Super A Super A-1 Super AV Super AV-1 B BN C Super C O12 2-piece rear felt seal ONLY fits as a rear crankshaft seal O14 2-piece rear felt seal ONLY fits as a rear crankshaft seal T340 gas, up to engine SN: 100500 T5 gas, up to engine SN: 100500 W12 2-piece rear felt seal ONLY fits as a rear crankshaft seal W14 2-piece rear felt seal ONLY fits as a rear crankshaft seal F12 2-piece rear felt seal ONLY fits as a rear crankshaft seal F14 2-piece rear felt seal ONLY fits as a rear crankshaft seal 100 130 140 200 230 240 330 340

Specifications 4.568" outside diameter (OD) 4.000" inside diameter (ID) 0.375" wide Set includes:1 pc. lip seal, rear seal housing gasket and 2 plugs. Hydro 70 gas, LP Hydro 86 gas, LP 340 diesel (no German diesels) 454 gas, LP 460 gas, LP, diesel (no German diesels) 464 gas, LP 504 diesel (no German diesels) 544 gas, LP 560 gas, LP, diesel (no German diesels) 574 gas, LP 606 gas, LP, diesel (no German diesels) 656 gas, LP, diesel (no German diesels) 660 gas, LP, diesel (no German diesels) 666 gas, LP 674 gas, LP 686 gas, LP 706 gas, LP, diesel (no German diesels) 756 gas, LP 806 gas, LP 826 gas, LP 856

3.876" seal area inside diameter (ID) Also replaces 251363R1 and 251363R11

Wear Sleeve comes with installer. 2400A IH D179 Diesel 2400B IH D179 Diesel 2500A IH D206 Diesel 2500B IH D206 Diesel 2544 w/ D-239 Diesel Engine 2706 IH D310 Diesel 2756 IH D310 Diesel 3088 IH D358 Diesel 3288 IH D358 Diesel 3500A IH D239 Diesel 454 IH D179 Diesel 464 IH D179 Diesel 484 IH D179 Diesel 544 IH D239 Diesel 574 IH D239 Diesel 584 IH D206 Diesel 624 IH D206 Diesel 664 IH D239 Diesel 674 IH D239 Diesel 684 IH D239 Diesel 686 IH D310 Diesel 706 IH D310 Diesel 724 w/ D-239 Diesel Engine 756 IH D310 Diesel 784 IH D246 Diesel 785 IH D246 Diesel 786 IH D358 Diesel 824 w/ D-239 Diesel Engine 826 IH D358 Diesel 884 IH D268 Diesel 886 IH D358 Diesel Hydro 84 IH D246 Diesel Hydro 86 IH D310 Diesel

These felt plugs go on the crankshaft rear oil seal retainer plate of the gas M, Super M, 400 and 450 Farmall tractors.

Specifications Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.645" bore size. Piston to cylinder clearance is .001 per inch of bore

Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.655" bore size. Piston to cylinder clearance is .001 per inch of bore

Specifications Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.685" bore size. Other Application Info Kit includes aluminum flat top pistons, rings, wrist pins and retainer clips. 2.685" bore size. Piston to cylinder clearance is .001 per inch of bore CUB CUB LO BOY

Specifications Will also fit models A thru 230 if a larger diameter outlet pipe is desired. Restoration quality muffler. IH logo and part number are stamped into the shell of the muffler. Baffled like original. Dimensions are also like original. Inlet length: 2-1/4" Inlet I.D.: 1-61/64" Shell length: 16-1/2" Shell dia.: 4-1/4" Outlet length: 10" Outlet O.D.: 1-25/32" Overall length: 28 3/4" T340 gas, with vertical exhaust Crawler T5 gas, with vertical exhaust Crawler 140 with vertical exhaust 240 with vertical exhaust 330 with vertical exhaust 340 gas, with vertical exhaust 404 with vertical exhaust 424 gas, dsl with vertical exhaust Serviceable for 444 gas, dsl with vertical exhaust Serviceable for 504

Specifications Will also fit models A thru 230 if a larger diameter outlet pipe is desired. Restoration quality muffler Baffled like original Dimensions are also like original IH logo and part number are stamped into the shell of the muffler Vertical round body Inlet length: 2-1/4" Inlet I.D.: 1-61/64" Shell length: 16-1/2" Shell diameter: 4-1/4" Outlet length: 10" Outlet O.D.: 1-25/32" Overall length: 28-3/4" Model Note Equipment Information T340 gas, with vertical exhaust Crawler T5 gas, with vertical exhaust Crawler 140 with vertical exhaust 240 with vertical exhaust 330 with vertical exhaust 340 gas, with vertical exhaust 404 with vertical exhaust 424 gas/dsl, with vertical exhaust Serviceable for 444 gas/dsl, with vertical exhaust Serviceable for 504