1066 IH DT414 Diesel Engine 1086 IH DT414 Diesel Engine, Prior S/N 140023 1466 IH DT436 Diesel Engine 1486 IH DT436 Diesel Engine, Prior S/N 100077 1566 IH DT436 Diesel Engine 1586 IH DT436 Diesel Engine 3688 IH D436 Diesel Engine 4166 IH DT436 Diesel Engine 4186 IH DT436 Diesel Engine 766 IH D360 Diesel Engine, 10MM - 2600 RPM 966 IH D414 Diesel Engine, Eff. S/N 17000 Hydro 100 IH D436 Diesel Engine

Steel 0.492" O.D. 0.382" I.D. 0.038" Thick. Fits: D-188 4-cylinder diesel engine D-236 6-cylinder diesel engine D-282 6-cylinder diesel engine D-301 6-cylinder diesel engine

Specifications Two (2) used per engine. Sold individually. 1.630" step to 1.690" O.D. Hydro 70 C291 gas, LP Hydro 86 C291 gas, LP 560 C263 gas, LP with engine SN: 7088 and up 656 C263 gas, LP with engine SN: 7088 and up 660 C263 gas, LP with engine SN: 7088 and up 666 C291 gas, LP 686 C291 gas, LP 706 C263 gas, LP with engine SN: 7088 and up 706 C291 gas, LP 756 C291 gas, LP 766 C291 gas, LP 806 C301 gas, LP 826 C301 gas, LP 856

Specifications 1.620" O.D. Measure diameter before ordering. 2 used per engine, sold individually. 460 C221" gas, LP 560 C263" gas, LP up to engine SN: 7087 606 C221" gas, LP 660

6.078" long .370" stem diameter 1.812" head diameter

4.938" long 0.338" stem diameter 1.340" head diameter

5.842" long .370" stem diameter 1.813" head diameter

5.070" long 0.370" stem diameter 1.780" head diameter

3.390" long 1.095" head diameter 0.309" stem diameter

5.275" long 1.5" head diameter .340" stem diameter

5.360" long 1.5" head diameter .340" stem diameter

4.830" long 1.340" head diameter 0.340" stem diameter

4.815" long 0.340" stem diameter 1.507" head diameter For Ford 9N, 2N, 8N

Valve Guide

Specifications 4 used per tractor Model Note Equipment Information T340 Crawler the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 T5 Crawler the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 130 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 140 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 230 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 240 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 330 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 340 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 404 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 424 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 444 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1 504 the following gas with cylinder head casting #''s 366299R1, 366299R2, 393508R1

Internal Governor Spring used on Farmall C, Super C and 200 Or Brake Positioning Spring used on 404, 504 & 606 0.085" wire diameter 1.960" overall length 0.560" outside diameter of spring C Governor spring Super C Governor spring 200 Governor spring 230 Governor spring 404 Used as a brake positioning spring 504 Used as a brake positioning spring 606 Used as a brake positioning spring

Model Note Equipment Information 300 Utility 350 Gas Utility

Air cleaner assembly for 2" pipe. Includes glass bowl. Restoration quality. Painted a red gloss. Part Reference Numbers: 59095D Fits Models: H; HV; Super H; SUPER HV

Air cleaner assembly for 2 1/4" pipe. Includes glass bowl. Restoration quality. Painted IH red gloss color. Part Reference Numbers: 59096D Fits Models: 400; 450; M; MDV; MV; Super M; SUPER MD; SUPER MDV; SUPER MTA

Part Reference Numbers: 277377R1;A42467 Fits Models: 1026 TRACTOR; 1070 TRACOTR; 1090 TRACTOR; 1170 TRACTOR; 1175 TRACTOR; 1206 TRACTOR; 1256 TRACTOR; 1270; 1370 TRACTOR; 1456; 21206 INDUST/CONST; 21256 INDUST/CONST; 21456 INDUST/CONST; 715 COMBINE; 815 COMBINE; 915 COMBINE; 970

Part Reference Numbers: 365413R1;73186 Fits Models: 2504 INDUST/CONST; 2544 INDUST/CONST; 2606 INDUST/CONST; 400; 403 COMBINE; 450; 453 HILLSIDE COMBINE; 460 INDUST/CONST; 503 COMBINE; 504 TRACTOR; 544 TRACTOR; 560; 580C INDUST/CONST; 580K INDUST/CONST; 600 CRAWLER LOADER; 606 TRACTOR; 615 COMBINE; 650 INDUST/CONST; 660 CULTIVATOR; 715 COMBINE; C153 ENG; C200 ENG; C221 ENG; C263 ENG; D188 ENG; D236 ENG; D239 ENG; D282 ENG; D301 ENG; D360 ENG; M; MD; SUPER WD9; W400; W450; WR9S

Engine Serial number 44-P-95 and below, 46-P-77 and below, 47-P-139 and below. Also look for engine prefix # 44, 45, 46, 47 and letter N or O in the middle. Gear Diameter 2.56" (65.02mm). Part Reference Numbers: 3055501R94;3055502R11;3055504R41 Fits Models: 553 TRACTOR; 654 TRACTOR; 724; 824; D239 ENG

Part Reference Numbers: 301525A1 Fits Models: 35; D35; D45; DX35; DX40; DX45; FARMALL 31; FARMALL 55

56 5/8" (1440mm) length, 1 1/8" (28mm) width, 40 degree angle. Part Reference Numbers: 8PK1440;J903091;J911557;K080560 Fits Models: 1085C INDUST/CONST; 1088 INDUST/CONST; 6591 POWER UNIT; 6591T POWER UNIT; 688 INDUST/CONST; 760 TRENCHER; 860 TRENCHER; 888 EXCAVATOR; 9010 INDUST/CONST; 9010B EXCAVATOR; 9020 EXCAVATOR; 9020B EXCAVATOR; 9030 EXCAVATOR; 9030B EXCAVATOR; 9210

Cut Edge Cogged Belt 1/2" X 60.25" POLY SET/2 Part Reference Numbers: 131303C91 Fits Models: 385 TRACTOR; 395 TRACTOR; 4586 TRACTOR

Dia 1/2" X 46" Part Reference Numbers: 403348R1 Fits Models: 460 TRENCHER; 560 TRENCHER; 660 TRENCHER; 706; 806

Dia 1/2" X 51" POLY Part Reference Numbers: 396830R1 Fits Models: 656

Dia 1/2" X 56" Part Reference Numbers: 403617R1 Fits Models: 656; 666 TRACTOR; 686 TRACTOR; 70; 706; 756 TRACTOR; 766 TRACTOR; 806; 826; 856; 86

Fan Belt 1/2" X 45.375" Part Reference Numbers: 320344A1 Fits Models: MX240; MX270

Fan Belt Length: 40.5" Width: 0.41" Part Reference Numbers: 10AV1025 Fits Models: JX55; JX65; JX70; JX75; JX80U; JX85; JX95

For C60 gas engine Part Reference Numbers: 107671C1 Fits Models: CUB; CUB LO BOY

Micro-Rib V-Belt Metric Code 6PK1587 Number Of Ribs 6 Outside Length 63.25" Pitch Length 62.5" Part Reference Numbers: 87437226 Fits Models: STX280; STX330; STX375; STX380; STX425; STX430; STX440; STX450; STX480; STX500; STX530

Outer Length 40.75" Pitch 40" 12 Ribs Part Reference Numbers: 325289A1 Fits Models: STX375; STX425; STX440; STX450; STX480; STX500; STX530

Outer Length 68.25" Pitch 67.5" 8 Ribs Part Reference Numbers: 243373A1 Fits Models: MX240; MX270

Serpentine type, 67 1/2" length (1715mm), top width 1 1/8" (28mm), by 40 degree angle. Part Reference Numbers: 8PK1702;J911567 Fits Models: 1150E CRAWLER LOADER; 1155E CRAWLER LOADER; 6T-830 ENG; 7110 TRACTOR; 7120 TRACTOR; 7130 TRACTOR; 7140 TRACTOR; 7150; 7210; 721B INDUST/CONST; 7220; 7230; 7240 TRACTOR; 7250 TRACTOR; 821 INDUST/CONST; 821B INDUST/CONST; 821C INDUST/CONST; 8910; 8920; 8930; 8940; 8950

Serpentine type, 58 1/8" (1475mm) length, 1 1/8 (28mm) top width, 40 degree angle. Part Reference Numbers: 8PK1460;J911562 Fits Models: 5.9L ENG; 5130 TRACTOR; 5140 TRACTOR; 5230 TRACTOR; 5240 TRACTOR; MX100; MX110; MX120; MX150; MX170

Serpentine type, 59 1/2" (1510mm) length, 1 1/8" (28mm) top width, 40 degree angle. Part Reference Numbers: 8PK1498;J911558 Fits Models: 1840 SKID STEER; 1845C SKID STEER; 5.9L ENG; 5120 TRACTOR; 5130 TRACTOR; 5140 TRACTOR; 5220; 5230 TRACTOR; 5240 TRACTOR; 5250 TRACTOR; MX100; MX110; MX120; MX135

Serpentine type, 61 1/8" (1555mm) lenhth, 1 1/8 (28mm) width, 40 degree angle. Part Reference Numbers: 8PK1555;J903098;J911563;K080605 Fits Models: 90XT SKID STEER; 95XT SKID STEER

Serpentine type, 62-1/2" (1590mm) length, 1-1/8 (28mm) width, 40 degree angle. Belt for gas applications. Part Reference Numbers: 8PK1590;J911559 Fits Models: 1150E CRAWLER LOADER; 1150G CRAWLER LOADER; 1150H CRAWLER LOADER; 1155E CRAWLER LOADER; 1840 SKID STEER; 1845 SKID STEER; 1845C SKID STEER; 480E INDUST/CONST; 480ELL INDUST/CONST; 480F INDUST/CONST; 4T-390 ENG; 580K INDUST/CONST; 580SE INDUST/CONST; 580SK INDUST/CONST; 584E INDUST/CONST; 585E INDUST/CONST; 586D INDUST/CONST; 586E INDUST/CONST; 590 TURBO INDUST/CONST; 621 WHEEL LOADER; 650 INDUST/CONST; 650G CRAWLER; 680K INDUST/CONST; 680L INDUST/CONST; 6T-590 ENG; 75XT SKID STEER; 780C INDUST/CONST; 780D INDUST/CONST; 850D DOZER; 850E DOZER; 850G DOZER; 855D CRAWLER LOADER; 855E CRAWLER LOADER; 85XT SKID STEER; 90XT SKID STEER; 95XT SKID STEER; G188D ENG

Serpentine type, 64 1/2" (1630mm) length, 1 1/8" (28mm) width, 40 degree angle. Part Reference Numbers: 8PK1630;J911566;K080635 Fits Models: 85XT SKID STEER; 90XT SKID STEER; 95XT SKID STEER