Replaces: 367408R1

Standard Rod Bearing Set For Farmall 424 With C146 Engine.

ROTOR. This rotor is for a Wico magneto. Some owners have put Wico magnetos on their Farmall A, B, C and other tractors that used IH H4 magneto.

The cylinder block number is cast on the side of the block. 4 points of surface contact. 0.664" I.D.

Specifications Includes Hardware

Includes a grease zerk as a lubrication point on the Reverse Shift Lever. Bushing not included. 1066 1456 1466 1468 1566 1568 21456 2756 2826 2856 756 766 826 856 966 Hydro 100

Specifications Polished Stainless Steel Baffled like the original Embossed with IH and part number Vertical round body Dimensions: 2.063" inlet length 2.400" inlet inside diameter 2.540" inlet outside diameter 12" shell length 6" shell diameter 13" outlet length 2-1/2" outlet outside diameter 27-1/2" overall length 340 diesel 460 gas, LP and diesel 504 diesel 544 gas, LP and diesel 560 gas, LP and diesel 606 gas, LP and diesel 656 gas, LP and diesel 660

Specifications Polished Stainless Steel (can discolor from extreme heat) If the stainless steel tarnishes, it will buff out with a metal cream such as Blue Magic. Baffled like original On applications that are using a cast 2 bolt flange distillate pipe , you may have to expand the muffler inlet Inlet length: 2-1/8" Inlet ID: 2-3/8" Shell length: 12-1/4" Shell diameter: 5-1/2" Outlet length: 13" Outlet OD: 1-3/4" Overall length: 27-3/8" I4 H HV Super H Super HV Super W4 W4 300 Farmall Rowcrop 350

Specifications 3-1/8" bore (2) 0.093" compression rings (1) 0.187" oil ring Fits our IHS3060 piston kit or our IHS5833 piston A ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. AV ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. Super A ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. Super A-1 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. Super AV ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. Super AV-1 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. B ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. BN ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. C ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. O12 ''some''; using 3.30" lower sleeve seal O.D.; with IH overhead valve engine, with block casting # 3193D, 3193DC, 4818D, 4818DX O14 ''some''; using 3.30" lower sleeve seal O.D.; with IH overhead valve engine, with block casting # 3193D, 3193DC, 4818D, 4818DX W12 ''some''; using 3.30" lower sleeve seal O.D.; with IH overhead valve engine, with block casting # 3193D, 3193DC, 4818D, 4818DX W14 ''some''; using 3.30" lower sleeve seal O.D.; with IH overhead valve engine, with block casting # 3193D, 3193DC, 4818D, 4818DX F12 ''some''; using 3.30" lower sleeve seal O.D.; with IH overhead valve engine, with block casting # 3193D, 3193DC, 4818D, 4818DX F14 ''some''; using 3.30" lower sleeve seal O.D.; with IH overhead valve engine, with block casting # 3193D, 3193DC, 4818D, 4818DX 100 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. 130 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. 140 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. 200 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. 230 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D. 240 ''some''; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #''s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D.

This 4-cylinder kit has a 3.4375" overbore and stepped head pistons. Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers. Most other sets available by special order.

This 4-cylinder kit has a 4" overbore. Includes sleeves, aluminum stepped head pistons, piston ring sets, piston pins and pin retainers. Most other sets available by special order. 1.312" wrist pin O.D. Sleeve O.D. (cold) 4.124"

Specifications Contains 1 O-ring for 1 sleeve 0.220" thick Must be used with engines with 3.30" lower sleeve diameter. Other Application Info Fits block casting numbers 3193D, 4818D, 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2 and 367825R1 A with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. AV with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. Super A with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. Super A-1 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. Super AV with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. Super AV-1 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. B with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. BN with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. C with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. Super C with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. O12 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. W12 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. W14 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. F12 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. F14 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. 100 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. 130 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. 140 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. 200 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. 230 with C113 or C123 engines and with 3.30" lower sleeve diameter; measure before ordering. 240

Contains 1 O-ring for 1 sleeve, 0.230" thick. Must be used with engines with 3.43" lower sleeve diameter. Other Application Info Contains 1 O-ring for 1 sleeve, 0.230" thick Must be used with engines with 3.43" lower sleeve diameter. Fits block casting numbers 354898R1, 354898R2, 366825R1 A w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! AV w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! Super A w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! Super A-1 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! Super AV w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! Super AV-1 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! B w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! BN w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! C w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! Super C w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! T340 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! Crawler T5 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! Crawler 100 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 130 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 140 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 200 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 230 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 240 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 330 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 340 w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering! 404

SOLENOID STARTER OR MANIFOLD HEATER SWITCH --- 3 POST --- SADDLE MOUNT --- WORKS ON 6V AND 12V SYSTEMS --- International Applications: LIKE THE OEM PART FOR: 140 12 VOLT ONLY, 300 GAS, 400 GAS & LP, 450 GAS, 330 GAS, 340 GAS, 350U GAS & LP, 350 GAS

Specifications For the models listed E4A Magnetos ( thumb nuts on Magneto cap), has threaded terminals --- Cotton braided wires with ring terminals. --- Tailored / Copper core --- Like original. Model Note Equipment Information T20 with E4A Magneto 10-20 with E4A Magneto McCormick Deering F20 with E4A Magneto F30 with E4A Magneto Regular with E4A Magneto

Specifications Nylon sheath. 45-1/8" long Both ends have 5/8 - 18 fittings. Other Application Info Both ends have 5/8 - 18 fittings. Model Note Equipment Information Hydro 70 (gas / LP / Diesel) Hydro, as a speedometer cable Hydro 86 (gas / LP / Diesel) Hydro, as a speedometer cable 354 As a tachometer cable for gas only 364 As a tachometer cable for gas only 544 (gas / LP / Diesel) Hydro, as a speedometer cable 656 (gas / LP / Diesel) Hydro, as a speedometer cable 666

3.880" base outside diameter

Specifications Gas / LP For replacement oil filter order IHS6018 Model Note Equipment Information A gas or LP without hydraulics I4 gas or LP Super A Gas / LP Super A-1 Gas / LP Super AV Gas / LP Super AV-1 Gas / LP B gas or LP BN gas or LP C Gas / LP Super C Gas / LP H gas or LP HV gas or LP Super H gas or LP Super HV gas or LP M gas or LP MTA gas or LP Super MTA gas or LP MV gas or LP O4 gas or LP O6 gas or LP OS4 gas or LP OS6 gas or LP T6 gas or LP Super W4 gas or LP W4 gas or LP Super W6 gas or LP Super W6TA gas or LP W6 gas or LP 100 Gas / LP 130 Gas / LP 140 Gas / LP 200 Gas / LP 230 Gas / LP 240 Gas / LP 300 gas or LP 330 Gas / LP 340 Gas / LP 350 gas or LP 400 gas or LP W400 gas or LP 404 Gas / LP 424 Gas / LP 444 Gas / LP 450 gas or LP W450 gas or LP 504 Gas / LP

Specifications 5.750" plate O.D. 13 Adjustments, square cutouts. H gas, LP HV gas, LP Super H gas, LP Super HV gas, LP M gas, LP Super M gas, LP MTA gas, LP Super MTA gas, LP MV gas, LP Super MV gas, LP Super MVTA

Stainless Carburetor Float Valve Assembly ID9 DIESEL WITH F8 STARTING CARB MD DIESEL WITH F8 STARTING CARB Super MD DIESEL WITH F8 STARTING CARB Super MDV DIESEL WITH F8 STARTING CARB MDV DIESEL WITH F8 STARTING CARB Super MDV-TA DIESEL WITH F8 STARTING CARB Super MTA DIESEL WITH F8 STARTING CARB ODS6 DIESEL WITH F8 STARTING CARB TD6 DIESEL WITH F8 STARTING CARB Super WD6 DIESEL WITH F8 STARTING CARB WD6 DIESEL WITH F8 STARTING CARB Super WD9 DIESEL WITH F8 STARTING CARB Super WDR9 DIESEL WITH F8 STARTING CARB WD9 DIESEL WITH F8 STARTING CARB WDR9 DIESEL WITH F8 STARTING CARB 400 DIESEL WITH F8 STARTING CARB W400 DIESEL WITH F8 STARTING CARB 450 DIESEL WITH F8 STARTING CARB W450 DIESEL WITH F8 STARTING CARB 600 DIESEL WITH F8 STARTING CARB 650 DIESEL WITH F8 STARTING CARB

Specifications Fits pipe OD of 2.200" to 2.405". M MD Super M Super MD Super MDV Super MDV-TA Super MTA Super MV Super MVTA T6 TD6 Super W6 Super W6TA WD6 400 W400 Wheatland 450

Specifications Fits pipe OD 2.450" to 2.560". Model Note Equipment Information 340 Diesel only 460 504 Diesel only 544 560 606 656 Gear drive only 660

Specifications This rain cap fits mufflers and exhaust pipes with a range of 1.500" to 1.600" outside diameter (OD) Fits pipe OD 1.500" - 1.600" B C CA G D10 D12 D14 D15 RC

For Standard (2.248") rod journal size Fits crankshafts with casting # 43734DB or 43734DC Measure rod journal diameter before ordering Cannot be returned if opened Priced and sold per journal I4 up to SN: 33339; using 2.248" rod journal H up to SN: 391357; using 2.248" rod journal HV up to SN: 391357; using 2.248" rod journal O4 up to SN: 33339; using 2.248" rod journal OS4 up to SN: 33339; using 2.248" rod journal W4

Specifications 2.750" standard rod journal Priced and sold per journal Measure rod bearing size before ordering. These cannot be returned if opened. 400 all with multiple cylinder heads 500 all with multiple cylinder heads 700 all with multiple cylinder heads 730 all with multiple cylinder heads 740 all with multiple cylinder heads 741 all with multiple cylinder heads 742 all with multiple cylinder heads 744 all with multiple cylinder heads 770 all with multiple cylinder heads 830 all with multiple cylinder heads 840 all with multiple cylinder heads 841 all with multiple cylinder heads 870 all with multiple cylinder heads 900 all with multiple cylinder heads 930 all with multiple cylinder heads 970 all with multiple cylinder heads 1030 all with multiple cylinder heads 1030 Comfort King all with multiple cylinder heads 1031 all with multiple cylinder heads 1032 all with multiple cylinder heads 1070 all with multiple cylinder heads 1090 all with multiple cylinder heads 1170 all with multiple cylinder heads 1175 all with multiple cylinder heads 1200TK all with multiple cylinder heads 1270

Specifications For standard (1.750") rod journal. Priced and sold per journal. Measure before ordering Warranty void if package has been opened. A with C-113 and C-123 engines AV with C-113 and C-123 engines Super A with C-113 and C-123 engines Super A-1 with C-113 and C-123 engines Super AV with C-113 and C-123 engines Super AV-1 with C-113 and C-123 engines B with C-113 and C-123 engines BN with C-113 and C-123 engines C with C-113 and C-123 engines Super C with C-113 and C-123 engines O12 with C-113 and C-123 engines O14 with C-113 and C-123 engines W12 with C-113 and C-123 engines W14 with C-113 and C-123 engines F12 with C-113 and C-123 engines F14 with C-113 and C-123 engines 100 with C-113 and C-123 engines 130 with C-113 and C-123 engines 140 with C-113 and C-123 engines 200 with C-113 and C-123 engines 230 with C-113 and C-123 engines 240

Specifications For standard (2.374") rod journal Priced and sold per journal Measure before ordering; return warranty void if package has been opened. Hydro 70 Gas, LP Hydro 86 Gas, LP 340 Diesel only (no German diesels) 454 Hydro only; gas, LP 460 Gas, LP, diesel (no German diesels) 464 Gas, LP 504 Diesel only (no German diesels) 544 Gas, LP 560 Gas, LP, diesel (no German diesels) 574 Gas, LP 606 Gas, LP, diesel (no German diesels) 656 Gas, LP, diesel (no German diesels) 660 Gas, LP, diesel (no German diesels) 666 Gas, LP 674 Gas, LP 686 Gas, LP 706 Gas, LP, diesel (no German diesels) 756 Gas, LP 766 Gas, LP 806 Gas, LP 826 Gas, LP 856

Specifications 2.060" standard rod journal Priced and sold per journal 230 Windrowers 404 424 444 454 504

Specifications Standard (1.750") rod journal Priced and sold as a 4 piece set. B-250 all with BC144, BD144, BD154 gas or diesel engines B-275 all with BC144, BD144, BD154 gas or diesel engines B-276 all with BC144, BD144, BD154 gas or diesel engines B-414 all with BC144, BD144, BD154 gas or diesel engines 354 all with BC144, BD144, BD154 gas or diesel engines 384 all with BC144, BD144, BD154 gas or diesel engines 424 all with BC144, BD144, BD154 gas or diesel engines 444

International / Farmall - Fits: Cub, U1 (Power Unit), 154, 184, 185, 50T, 52R, 55T, 55W (Balers), Cub LoBoy: Cub Loboy; Replaces: 251267R21, 251268R21, 357216R91, 357219R91, 367875R91

Specifications Standard (3.375") main journal 1.220" wide bearing (1 through 6) Hydro 100 Hydro 186 966 986 1066 1086 1466 1486 1566 1586 3488 all up to engine SN: 440035 3588 all up to engine SN: 440035 3688 3788 all up to engine SN: 440035 4166 4186 4366 all up to engine SN: 440035 5088 5288 all up to engine SN: 440035 5488 all up to engine SN: 440035 6388 6588 all up to engine SN: 440035 6788

For standard (1.499") rod journal 0.661" wide bearing Priced and sold per journal

Specifications Fits up to Engine SN: 261717 using 251246R1 Connecting Rod: Cub 1947-1964 Cub Loboy 1964-1968 0.761" bearing width Will not fit engines above this SN or engines that have been converted to the later connecting rods Priced and sold per journal Measure before ordering; warranty void if package has been opened. Cub 1947 - 1964, up to engine SN: 261717 using 251246R1 connecting rod Cub Loboy 1964 - Late 1968, up to engine SN: 261717 using 251246R1 connecting rod

LH lever housing, sealed drive end housing w/ external rotatable mount. Starter Type DD Volts 12V Family 37MT Power (kW) 4.5 Rotation CW Tooth Count 10 Quality Aftermarket New/Reman New 2400A w/ Diesel Engine & Hydrostatic Transmission 2500A w/ Diesel Engine

Mounting holes measure 5" center to center. Starter Type DD Volts 12V Family 42MT Power (kW) 7.6 Rotation CW Tooth Count 11 Quality Aftermarket New/Reman New 7588 7788

Starter - New, 12V, PLGR, CW, Aftermarket Delco Remy Starter Type PLGR Volts 12V Power (kW) 4.5 Rotation CW Tooth Count 12 Quality Aftermarket New/Reman New 7030 3500 Diesel Engine 7040 3500 Diesel Engine 7045 3500 Diesel Engine 7050 3500 or 3700 Diesel Engine 7060 3500 or 3700 Diesel Engine 7080 3500 or 3700 Diesel Engine 7580 3500 or 3700 Diesel Engine 8030 670T Diesel Engine 8050 670T Diesel Engine 8070 670T Diesel Engine

This is a Planetary Gear Reduction Starter. The Starter - New, 12V, PLGR, CW, Aftermarket Iskra/MAHLE fits equipment brands such as: Bobcat, Case IH, International, John Deere, Massey Ferguson, New Holland, Oliver, White Starter Type PLGR Volts 12V Power (kW) 4.2 Rotation CW Tooth Count 10 Quality Aftermarket New/Reman New Sold As Each 2000 2400 2410 SKID STEER LOADER 1074 w/ Perkins 4-236 Diesel Engine 1080 631 641 741 843 843B 853 853C 853H 943 953 970 Diesel, Engine 974 w/ Perkins 4-236 Diesel Engine

Specifications Stainless steel. 3-3/4" I.D. X 1-1/16" Width Cub up to SN: 224400; using Delco starter number 1109603 or 1109613 Cub Loboy up to SN: 18700; using Delco starter number 1109603 or 1109613

Starter For Farmall: B424, 424, 2424. Replaces Delco PN#: 1107364, 1108296. 12 Volt, Direct Drive, 9 Tooth.

Starter Lever For Farmall: Cub SN#501-128798 Replaces IH PN#:351347R2 7.369" Long.